Day11 Devices/LAN/WAN. Network Devices Hub Switches Bridge Router Gateway.

Slides:

Advertisements

Similar presentations

LAN Devices 5.3 IT Essentials.

Advertisements

LAN Maps & Symbols Topologies & Devices. Physical & Logical Topologies Physical Topologies define the actual layout of the wire (media). For example,

Lab Practical 2 Study about different types of Networking Device

Chapter 8: Local Area Networks: Internetworking. 2 Objectives List the reasons for interconnecting multiple local area network segments and interconnecting.

1 Fall 2005 Layer 3 Switches and VLANs Qutaibah Malluhi CSE Department Qatar University.

1 Computer Networks Internetworking Devices. 2 Repeaters Hubs Bridges –Learning algorithms –Problem of closed loops Switches Routers.

Small Office Service Serial Router Connects Internal Stations to Shared Broadband Access Service Small Office Serial Router Shared Broadband Line ISP.

Institute of Technology Sligo - Dept of Computing LAN Maps & Symbols Topologies & Devices Paul Flynn.

1 Chapter 8 Local Area Networks - Internetworking.

1 Chapter 8 Local Area Networks - Internetworking Data Communications and Computer Networks: A Business User’s Approach.

Local Area Networks Part II. 2 Introduction Many times it is necessary to connect a local area network to another local area network or to a wide area.

1 25\10\2010 Unit-V Connecting LANs Unit – 5 Connecting DevicesConnecting Devices Backbone NetworksBackbone Networks Virtual LANsVirtual LANs.

Networking Components

CECS 474 Computer Network Interoperability Tracy Bradley Maples, Ph.D. Computer Engineering & Computer Science Cal ifornia State University, Long Beach.

Networking Hardware and Components By: Sean Bell.

Basic Networking Components

And how they are used. Hubs send data to all of the devices that are plugged into them. They have no ability to send packets to the correct ports. Cost~$35.

Networking Components By: Michael J. Hardrick. HUB  A low cost device that sends data from one computer to all others usually operating on Layer 1 of.

Networking Components Mike Yardley LTEC 4550 Assignment 3

LTEC 4560 Summer 2012 Justin Kappel Networking Components.

Chapter 4: Managing LAN Traffic

Common Devices Used In Computer Networks

Network Devices.

1/28/2010 Network Plus Network Device Review. Physical Layer Devices Repeater –Repeats all signals or bits from one port to the other –Can be used extend.

Chapter 8 Local Area Networks: Internetworking Data Communications and Computer Networks: A Business User’s Approach.

 Network Segments  NICs  Repeaters  Hubs  Bridges  Switches  Routers and Brouters  Gateways 2.

Network Devices.

 Lecturer : Ch. Nabeel Ahmed Superior University Grw Campus 1.

Network 101 By Tom Battaglia Dell Connectivity 2 RR2 DC Drawing 3 Heterogeneous Network 4 OSI Model.

SHAWN CROWE LTEC /026 ASSIGNMENT #3 Networking Components.

Networking Components Daniel Rosser LTEC Network Hub It is very difficult to find Hubs anymore Hubs sends data from one computer to all other computers.

Review: –Ethernet What is the MAC protocol in Ethernet? –CSMA/CD –Binary exponential backoff Is there any relationship between the minimum frame size and.

15.1 Chapter 15 Connecting LANs, Backbone Networks, and Virtual LANs Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or.

LAN Devices  Purposes: Dividing the network into subnets Dividing the network into subnets Joining two networks together Joining two networks together.

Chapter 7 Backbone Network. Announcements and Outline Announcements Outline Backbone Network Components  Switches, Routers, Gateways Backbone Network.

NETWORK HARDWARE CABLES NETWORK INTERFACE CARD (NIC)

Chapter2 Networking Fundamentals

Routers Operate in a Mesh –Many possible alternative routes between two stations Only One of Many Possible Alternative Routes Packet.

A machine that acts as the central relay between computers on a network Low cost, low function machine usually operating at Layer 1 Ties together the.

NET 324 D Networks and Communication Department Lec1 : Network Devices.

Computer Networks. Internetworking Devices Network Interface Card (NIC) Repeaters HUB Bridge Switch Router.

CCNA Guide to Cisco Networking Chapter 2: Network Devices.

Network Components By Kagan Strayer. Network Components This presentation will cover various network components and their functions. The components that.

Computer Networks Syed Md. Ashraful Karim Lecturer, CSE BU.

Networking Components Siby Abraham LTEC Purpose of the presentation  This presentation will cover how certain network components function, when.

Planning and Implementing a Basic SOHO Network using Network Segmentation COMP 316.

Data Communications & Computer Networks, Second Edition1 Chapter 8 Local Area Networks: Internetworking.

Data Communications and Networks Chapter 1 - Classification of network topologies Data Communications and Network.

Networking Components WILLIAM NELSON LTEC HUB  Device that operated on Layer 1 of the OSI stack.  All I/O flows out all other ports besides the.

Local Area Networks Honolulu Community College

Computer Network Architecture Lecture 3: Network Connectivity Devices.

NETWORK DEVICES RONALD SHERGA OCTOBER 13, 2015 LTEC 4550.

Networking Components William Isakson LTEC 4550 October 7, 2012 Module 3.

Created By Anoosh Samuel Abdul Razaq Qadir Hussain Asim Maaz Waheed Tayab

.  Hubs send data from one computer to all other computers on the network. They are low-cost and low-function and typically operate at Layer 1 of the.

Networks DEVICES. Repeater device to amplify or regenerate digital signals received while setting them from one part of a network into another. Works.

15.1 Chapter 15 Connecting LANs, Backbone Networks, and Virtual LANs Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or.

Connectors, Repeaters, Hubs, Bridges, Switches, Routers, NIC’s

1 Networking Devices MEENAKSHI SOOD LECT ECE NIT HAMR.

Chapter 2: Network Topologies & Network Devices

Local Area Networks Honolulu Community College

Networking Devices.

Part III Datalink Layer 10.

NETWORK TOPOLOGIES There are three basic configurations used to connect computers they are the Bus Ring Star.

Chapter 4 Data Link Layer Switching

Connecting Networks Repeater: physical layer Bridge: data link layer

Chapter 7 Backbone Network

الفصل الثاني عشر (المحاضرة الثالثة)

Part III Datalink Layer 10.

Connectors, Repeaters, Hubs, Bridges, Switches, Routers, NIC’s

Presentation transcript:

Day11 Devices/LAN/WAN

Network Devices Hub Switches Bridge Router Gateway

Hub Keyword: Dumb Operates at physical layer –Just repeats electricity Will often cause collisions More machines = more congestion No longer exist

Bridge Originally to connect 2 LANs. Selectively forwards packets from one LAN to the other if they are destined for a machine on the second LAN Requires a small computer to evaluate each packet to see where to send it No longer exist

Hub Switch Sends traffic to all ports Very cheap Very simple Could connect 8, 16, 24, 32, 64, or 128 computers Could only support a single media (Cat5) Will have lots of collisions Everyone sees everything Only forwards traffic to the port it should go More expensive More complex Can connect 8, 16, 24, 32, 64, or 128 computers Often supports more than one media (fiber, Cat5 etc) Cuts down on collisions You can only see data destined for you

Why break up into LANs? A company with 1000 computers could have a single LAN –With hubs, it would be horribly slow –Even with switches, it’ll be fairly slow, you may saturate the backbone of the switch and the switch interconnects Better to break up into 5 LANs with 200 computers each. –Provides less “chatter” –May improve security

Physical Breakup Computers plug into 7 32port switches Switches connect to each other with fiber People in this LAN can talk to any of the other 199 computers on this LAN They cannot talk to computer 201 which is in our second LAN. LAN1 and LAN2 are both connected to a Router –A single router will be sufficient for all 1000 computers, and will end up with 5 cables connected to it

Virtual Breakup Sometimes keeping up with all those wires is difficult –Sometimes 2 people need to be in the same LAN, but are in different buildings Instead of running the wires separately, most switches are smart enough today to deal with Virtual LANs A Virtual LAN (VLAN) acts like a physical LAN, but is created by telling the switch which VLAN each port is on. –Hence, 2 people plugged into the same switch may not be able to talk to each other if they are on different VLANs without going through a router.

Router Connects multiple LANs Single connection into network –You don’t plug computers into routers directly Has IP address on network Routes data at a higher level in OSI HUB Computer HUB Computer HUB Computer HUB Computer Router I

Switches Routers Used to connect multiple computers locally Decide which machine to send to based on MAC address Used to connect multiple LANs Decide which machine to send to based on IP address Strips MAC address information from the packet and replaces with WAN info

Gateway Old term for a device which connects 2 different types of networks –E.g. Ethernet -> Token Ring Today term is usually interchangeable with Router

Then and Now In the old days –Computers connected to Hubs –Hubs were interconnected via Bridges/Gateways –When you needed to get to a WAN you passed through a router Today –Hubs and Bridges no longer exist, and have been replaced by switches –Routers are still routers, but are sometimes called gateways

Fault Tollerance Networks need to be fault tolerant –If a switch fails, we still want to be able to reach the computer –Solutions: Plug the computer into 2 different switches Make each switch have internal redundancy –If a part of the switch fails, there is a redundant “hot spare” available.