- In year 1832 foundation of forge by Archduke Karol Ludwik Habsburg. - In 1837 transformation from forge into pig iron processing works named Fryderyks Ironworks. - In 1912 creation Austrian Public Limited Company for Bolts and Forged Articles Factory Breviller and A. Urban and Sons Company, with head office in Vienna – production of first bolts. - During II World War, destruction of the factory in 70%; resumption of production from the 1st July On the July 2005 Company gained new owner, which is Srubena Unia S.A r. came economic change from Bolts Company ŚRUBENA- PRODUKCJA Ltd. into Public Limited Company, through merger with ŚRUBENA UNIA S.A. Companys History

ŚRUBENA UNIA S.A. - nowadays Companys History

-The company is second fasteners producer in Poland and belongs to the tenth of the biggest European manufacturers of fasteners. - Monthly production is ~ tons - Employment: 416 employees. - Annual turnover: 20 – 25 million euros. - Sales: - Export 60% - Domestic 40% - The Company is the only manufacturer of fasteners in Poland applying both cold as well as hot forging technologies - Qualified staff and well maintained machinery guarantee an efficient production and the highest quality. Companys characterization

Shareholders ŚRUBENA UNIA S.A.

Composition of the Board of Directors: - President of the Board Andrzej Herma - Vice President of the Board Tadeusz Żydek Composition of Management: -Development Manager Piotr Nowak - Logistic Manager Grzegorz Jurasz - Marketing Manager Tadeusz Jopek - Financial Manager Mariusz Kaminski

PRODUCTION ORGANIZATION CHEMICAL TREATMENT AND DRAWING SURFACE TRERATMENT HEAT TREATMENT HOT FORGING (BOLTS AND NUTS) RAW MATERIAL STOCK COATING COLD FORGING (BOLTS)

ŚRUBENAs UNIA S.A. production programme covers a wide range of standard parts acc. to PN, DIN ANSI, BS, GOST, ISO, EN and customers drawings. Production Range

Bolts: DIN 931/ISO 4014 M 5 – M 36, length 25 – 700, GRADES: 4.6 up to 10.9 DIN 601 M 5 – M 36, length 25 – 700, GRADES: 4.6 up to 8.8 DIN 7990 M12 – M 36, length 25 – 700, GRADES: 4.6 up to 8.8 DIN 933/ ISO 4017 M 5 – M 36, length 10 – 240, GRADES: 4.6 up to 10.9 DIN 558 M 5 – M 36, length 10 – 240, GRADES: 4.6 up to 8.8 DIN 912 M 5 – M 20, length 16 – 140, GRADES: 4.6 up to 10.9 DIN 603 M 5 – M 16, length 20 – 620, GRADES: 4.6 up to 8.8 Grade 12.9 also is considered Nuts: DIN 555 M 12 – M 36, GRADE: 5 DIN 934/ISO 4032 M 12 – M 36, GRADES: 5 up to 10 STANDARD PARTS

SPECIAL AND DRAWING PARTS

FASTENERS FOR RAILWAY TRACK

- Friction bolts acc. to DIN 6914 property class 10.9 Diameters from M12 to M36 Lengths from 30 mm to 400 mm - Nuts under DIN 6915 acc. to property class 10 Diameters from M12 to M36 - Washers acc. to DIN 6916 acc. to above mentioned diameters DIN HV10.9 HV BOLTS

Friction bolts acc. to norm EN ÷6 harmonized to UE Directive no. 89/106/EWG In the entire scope of the norm from M12 to M36 In HV i HR system - certificate with sign of the safety HV i HR BOLTS 1234

Protective coatings: Oiled Oil black oxided Phosphated Zinc plated : Hot Dip Galvanised acc. to ISO Electrolytic zinc coating acc. to PN-EN ISO 4042 DACRO 320 i 520, DELTA-PROTEKT, DELTA-TONE, DELTA-SEAL Lubricating coatings: Gleitmo (colourless or black with the addition of MoS 2 dry spreadable film about the determined coefficient of the friction ) Pre-application coatings:: LOCTITE, PRECOTE, SCOTCHGRIP The kinds of surface finishing

Applied Coatings

Sales development directions within new assortments scope: New assortment: studs weld bolts products acc. to recipients technological specification products for automotive industry New protective coatings: Dacromet, Geomet, Delta Tone, Magni, Zintek galvanic galvanizing with high rustproof resistance /ZnNi, ZnFe/ pre-application coatings / Loctite, Scotch Grip, Precote, Eslok/

Reyher Wuerth Boellhoff Kobout Asmet Keller Kalmbach Bossard Bufab Civata Anixter Iron Trade Metalcom Kirchhoff Paulstra Metal Holding Huta Łabędy Deutsche Bahn Vossloh, Vossloh Nordic SBB - Schubart PKP PLK Energoport Main Recipients:

The certificates presently issued: - Automobile industry Certificate: ISO TS 16949: Quality Management System: EN ISO 9001: Certificate for high pressure usage: AD2000 – Merkblatt W 0 /TRD System certificate for high pressure usage: 97/23/EG - Ü Certificate for construction engineering - Certificate HPQ for railways - Certificate Q1 supplier for German Railways - Environmental Certificate ISO : Certificate for HV and HR friction sets EN :2007

THANK YOU VERY MUCH FOR YOUR ATTANTION