.1 Proprietary and Confidential © 2014 Babcock & Wilcox Power Generation Group, Inc. All rights reserved. The Babcock & Wilcox Company FastCirc™ HRSG June.

Slides:

Advertisements

Similar presentations

Industrial Boilers Steam generators Closed vessels made of steel and

Advertisements

ACTIVE LEARNING PROCESS

Exhaust Heat Recovery Systems

Power Plant Engineering

Power Plant Construction and QA/QC Section 2.3– Steam Generators

Control calculations Heat Engines & Boilers.

Super Critical Boilers SYSTEM STUDIES ON ADVANCED POWER GENERATION TECHNOLOGIES FOR 21st CENTURY Dr V K Sethi Director MOP/ CEA.

Main Steam Cycle Let the fun begin….

ENERGY CONVERSION MME 9617A Eric Savory

1 Proprietary & Confidential © 2012 BrightSource Energy, Inc. All rights reserved. © BrightSource Energy, Inc. All rights reserved. 1 Ivanpah.

ACTIVE LEARNING PROCESS Prepared By : BHATT HARSHIT 13BEECM026 SOLANKI KAUSHAL 13BEECM033 Guided By : Prof. J M Panchal Branch: Electronics & Communication.

Introducing a Revolutionary New Composite Tube Structure Technology...

Jeffrey Phillips Cycling HRSGs Jeffrey Phillips

What is GT MASTER WHAT IS GT MASTER? Thermoflow, Inc.

What is GT MASTER While GT PRO is the design program for combined cycles, GT MASTER is the corresponding simulation program for off-design calculations.

Severe Service Metal Seated Ball Valves

Watertube Boiler.

Elliott Microturbines Absorption Chiller Integrated System Development

What is STEAM MASTER While STEAM PRO is the design program for conventional steam cycle plants, STEAM MASTER is the associated simulation program for off-design.

Budget Shortfall Options Ian Wyatt - Atkins JIP on Bursting Disks for Shell & Tube Exchangers – 2 nd Stakeholders Meeting.

Station 4 ?? Temperatures and Moisture Moisture Meters Pin Contact Data Loggers Spot Temperature Meter Thermal Imager Cautions and Safety.

SEMINAR ON BOILERS BOILERS. WHAT IS A BOILER? Boiler is an apparatus to produce steam.Thermal released by combustion of fuel is transferred to water which.

Steam Boilers UNIT-VI.

Turbine Protection and Control System

Open and closed circulatory systems

© 2010 Invensys. All Rights Reserved. The names, logos, and taglines identifying the products and services of Invensys are proprietary marks of Invensys.

Watertube Boilers.

Air Compressors.

Exhaust Cooker An Eco-friendly Technology Inventor - Rakesh Chander Indian Patent No Date of Filing 7 March 2006 Date of Grant 6 May 2009.

CHAPTER 6 Moving Heat: Heating and Air Conditioning Principles

Ludington Pumped Storage Plant and Wind Power Operational Considerations David Lapinski Consumers Energy Company June 16, 2009.

Water Chemistry in Steam Generators: Opportunities for Investigation IAPWS Workshop – Canadian National Committee 11 May 2009.

Clean and Pure steam in the Biopharm industry

Radial T Profile Across Wall Separating Hot & Cold Fluids 1.

Avista’s Flexibility Overview James Gall Senior Power Supply Analyst Contact:

9/2003 Welded Plate Heat Exchangers “Where gaskets won’t work”

Golden Valley Electric Assoc. Inc © 2012 GVEA. All rights reserved. GVEA BESS Expected and Actual Performance Dan Bishop Golden Valley Electric Assoc Fairbanks,

For Sell and tube heat exchanger, pump, compressor and valve. Designed by:- Lulwa H. Hamada EQUIPMENT DESIGN.

Clark Reliance Corporation Strongsville, OH. Fuel Gas Treatment.

Presentation Dungrani rakesh v. Div : a Branch : mechenical Sem : 1 st.

Equipment Design. Content: 2 Heat Exchanger ( 1 & 2 ) Cooler (E-100) Compressor (K-102) Trans-alkylation reaction.

Renewables and System Services Ann Scully.

ONE SOURCE ONE PURPOSE MANY SOLUTIONS Utility Users Group Meeting Orange Beach, AL August 4, 2015 GUIDELINES & TECHNIQUES FOR THE EFFECTIVE CONTROL OF.

Automating Flow Control on Gas Lift Wells

Modeling a Steam Generator (SG)

Super Critical Boilers Measures to improve Plant Efficiency And / or Heat Rate of Supercritical Units Turbine side measures : Higher steam parameters.

P M V Subbarao Professor Mechanical Engineering Department

Heat Exchanger Design Cooler E-100 Heater E-108.

1 - An AISI 1020 cold- rolled steel tube has an OD of 3.0 inch. The internal pressure in the tube is 6,840 psi. Determine the thickness of the tube using.

Prepared by : Nishant .A. Raval

Patent Pending 1 Forced-Air Ripening & Cooling Container Costs and Benefits Ripe.Anywhere.™ and Pre-Cooled, Too™

Prof. D.N. Reddy Director Centre for Energy Technology and Principal University College of Engineering Osmania University Hyderabad – 7. THEME PAPER ON.

Insight Proprietary & Confidential. Do Not Copy or Distribute. © 2015 Insight Direct USA, Inc. All Rights Reserved. Insight Presentation Insight’s Tagline.

PRESSURE VESSEL. 1.Determine the bursting steam pressure of a steel shell with diameter of 10 inches and made of ¼ in thick steel plate. The joint efficiency.

Exhaust Heat Recovery Systems

Reheat Coil (Typical of 5)

Date of download: 1/2/2018 Copyright © ASME. All rights reserved.

Pressurized Water Reactor

THERMAL POWER PLANT.

Power Plant Engineering. Boilers Boilers Boiler is an apparatus to produce steam. Thermal energy released by combustion of fuel is used to make steam.

THERMAL POWER PLANT.

THERMAL POWER PLANT.

THERMAL POWER PLANT.

Reheat Coil (Typical of 5)

WATER AND STEAM SYSTEM.

Heat Recovery Steam Generators

Combined Cycle Power Plants

Presentation transcript:

.1 Proprietary and Confidential © 2014 Babcock & Wilcox Power Generation Group, Inc. All rights reserved. The Babcock & Wilcox Company FastCirc™ HRSG June 12, 2014

.2 Proprietary and Confidential © 2014 Babcock & Wilcox Power Generation Group, Inc. All rights reserved. HRSG Side View with FastCirc™ Vertical Separator Single row harps FastCirc™ Vertical Separator Optimized SH and RH drains

.3 Proprietary and Confidential © 2014 Babcock & Wilcox Power Generation Group, Inc. All rights reserved. FastCirc HRSG Arrangement Reduced crane requirements during construction Increased personnel safety in operation Performs the same function of an HP Steam Drum Reduces shell and connection stresses during fast start and rapid load changes

.4 Proprietary and Confidential © 2014 Babcock & Wilcox Power Generation Group, Inc. All rights reserved. Thick Walls (~6”-7” for a 2400 PSI Unit) – Limits startup time / HP drum life Drum hump during startup and transients Drawbacks of Conventional HP Drum

.5 Proprietary and Confidential © 2014 Babcock & Wilcox Power Generation Group, Inc. All rights reserved. Patented FastCirc™ Vertical Separator Vertical Separator Benefits: Performs the same function as an HP steam drum Thin Walls Increased Response to Load Changes Eliminates Drum Hump Problems Expands in the vertical direction (same as tube bundles)

.6 Proprietary and Confidential © 2014 Babcock & Wilcox Power Generation Group, Inc. All rights reserved. Vertical Separator Benefits: Thin walls (~3” for 2400 PSI Units) Expands in the vertical direction (same as tube bundles) Integral internals Same steam purity and holding capacity as conventional drum Patented FastCirc™ Vertical Separator

.7 Proprietary and Confidential © 2014 Babcock & Wilcox Power Generation Group, Inc. All rights reserved. Hot start ≤ 8 hours Warm start > 8 hours and ≤ 72 hours Cold start > 72 hours Typical Gas Turbine Ramp Rate for Hot Startup Flow % Press. Psig, Temp ° F Time (minutes) Fatigue Life Usage FastCirc Vertical Separator vs. HP Steam Drum

.8 Proprietary and Confidential © 2014 Babcock & Wilcox Power Generation Group, Inc. All rights reserved. Thank You!