Customer Training Timken Learn and Lead Part B Cylindrical Roller Bearing Cage Design.

Slides:

Advertisements

Similar presentations

UBC Bearings of America Limited

Advertisements

M(Kg)d (mm)D (mm)B (mm) nG min-1)Cr (KN)Cor (KN) 1700/ CA.W33.EL Elevator Gearless Traction Machine Features and Advantage Permanent.

AND ELEMENTS OF MACHINES

October 30, 2007 © SKF Group Slide 0. Low Friction / Energy Efficient Rolling Bearings Presentation to : TAPPSA Members Date: 23 September 2010 Presenter.

Piston Rings. Pressure behind the FIRST compression ring is close to that in the cylinder Pressure behind the FIRST compression ring is close to that.

Lubrication Of Roller Bearings. Roller Bearings have a long history around 700 BC AC around 3000 BC.

Piston Assembly Gas and Inertia forces are applied. Gas and Inertia forces are applied. Both of these forces are variable in Both of these forces are variable.

ROLLER BEARINGS. Bearings are used to support rotating shafts and are classified according to the direction of the main load: Axial bearings are designed.

Mechanical Engineering Dept.

860 21/2”-10”. Modification Overview  Production of the 2½” – 10 sizes began in  Lead free version (LF860) was introduced in Parts do not.

On the Advanced Efficiency Analysis for Half Toroidal CVT -The Efficiency Analysis Considering Deformation of CVT Components - Masayuki Ochiai Kinji Yukawa.

PISCO Atmospheric Dispersion Compensator Will High Harvard University December 2006.

MACHSEAL 101. Design Information Stationary rotary face seal that utilizes axial spring force to positively mate the optically flat seal face against.

Rolling element bearings A. Lozzi 2012

Customer Training Timken Learn and Lead 5/16/2007Spherical Product Overview1 Nomenclature.

MAGSEAL 101. Rotary face seal that utilizes magnetic attraction force to positively mate the optically flat seal faces. Magnetic attraction force variation.

Products made from rolling

Bearings Nizwa College of Technology.

Rolling Contact Bearing

Needle Bearing Product Overview

Coupling It is the mechanical element used to connect two shaft of a transmission system and transmit the torque from one shaft to another Coupling.

CHAPTER 14 Wheel Bearings and Service

Rolling element bearings A. Lozzi 09

In the analysis of a tilting pad thrust bearing, the following dimensions were measured: h1 = 10 mm, h2 = 5mm, L = 10 cm, B = 24 cm The shaft rotates.

Bearings Lubrication & Cooling Roger Bortignon.

Journal bearing, Ball bearing

New Mexico FFA Agricultural Mechanics Career Development Event Engine Power.

Bulk Deformation Processes in Metalworking

Rolling Process of reducing the thickness or changing the cross-section area of a long work piece by compressive forces. accounts for about 90% of all.

Keys · Keys connect functional parts of mechanisms and machines, allowing moving parts to transmit power or to locate parts relative to each other.

Timken Learn and Lead Customer Training 5/17/2007Radial Ball Product Overview1 Radial Ball Bearing Product Overview Part B Narrated by David Beach Motion.

825, 825Y, 825YD 21/2”-10”. Modification Overview  825- ( ) Cast iron body- Threaded in seats- Internal check parts are epoxy coated iron. Old.

Forging new generations of engineers. Bearings What is a Bearing ? A bearing is part of a machine that supports and or guides a moving part. The most.

Chapter 9 Bearings Topics Introduction to bearings Types of bearings

Radial Ball Bearing Product Overview

Problem-1: A rigid coupling has a bore diameter of 50 mm. Four machined bolts on a bolt circle of 125 mm diameter and fitted in reamed holes. If the bolts.

Wheel Bearings. Bearing uses n Pivots n Wheels n rotating shafts n Oscillating shafts n Sliding shafts.

Wheel Bearing Failures

Timken Cylindrical Roller Bearing Product Overview Part A

Rolling-Contact Bearings

Bearings Parts Technician First Period Material Identification and Calculations c.

Bearings By Graham Templin Objective: To provide information on the different types of bearings and their applications. Differentials.

Bearing Use in Design. Bearing Terminology BearingRacewayRolling ElementsCage Lubricant Seal=

World-Class Manufacturer & Solution Provider in Custom and Commodity Bearings.

ADVANCED MECHANICAL DRAFTING

ROLLING Rolling is a process of reduction of the cross-sectional area or shaping a metal piece through the deformation caused by a pair of metal rolls.

1 22/02/2005Strategic's Annual Reliability Conference Bearing Damage Analysis Jonathan Brown Manager IOE & Rail Australian Timken Phone: Fax:02.

Bearings Types Plain Rolling Element Ball Roller Jewel Precision

Chapter 11 Rolling-Contact Bearings Lecture Slides The McGraw-Hill Companies © 2012.

BEARINGS Suported by. Introduction Different types of bearing are used extensively throughout our machines to join stationary part to a moving part. Suported.

AKHILESH KUMAR PRODUCTION ENGINEERING . 14UPE054

FORGING Introduction.

MAGM 262 Hydraulic Seals Mr. Conrado.

Pistons and Crankshafts

Comparing Rolling to Journal

Bearings Rolling Contact Bearings – load is transferred through rolling elements such as balls, straight and tapered cylinders and spherical rollers. Journal.

Rolling Contact Bearings

Version NKE Bearings > Application examples in heavy, construction and mining machinery.

Part III Forming and Shaping Processes and Equipment

ME 251 Anupam Saxena Professor Mechanical Engineering

The Fundamentals of Bearings

Rolling Process of reducing the thickness or changing the cross-section area of a long work piece by compressive forces.

NKE bearings for industrial gearboxes

Chapter 13 Rolling-contact Bearings

880V 21/2”-10”.

Bearing Use in Design.

Presentation transcript:

Customer Training Timken Learn and Lead Part B Cylindrical Roller Bearing Cage Design

Cylindrical Roller Bearing Product Overview 5/7/2007CRB Product Overview 2 Cage Design  TVP = glass fiber reinforced nylon  M = one piece, machined bronze finger or fully milled  S = one piece stamped steel (5200 series & HJIR)  Pin type S Pin type M

Customer Training Timken Learn and Lead Precision

Cylindrical Roller Bearing Product Overview 5/7/2007CRB Product Overview 4 ISO Class ABMA ClassUsual Symbol NormalRBEC 1No Symbol (PO) 6RBEC 3P6 5RBEC 5P5 4RBEC 7P4 2RBEC 9P2 Typical Precision Classes (Tolerance) ISO 492 Section for metric roller bearings in increasing precision

Customer Training Timken Learn and Lead Application Considerations

Cylindrical Roller Bearing Product Overview 5/7/2007CRB Product Overview 6 Application Considerations  Lubrication  Heat generation  Speed/acceleration  Misalignment

Cylindrical Roller Bearing Product Overview 5/7/2007CRB Product Overview 7 Lubrication  Bearing features –Lubrication grooves and holes in OD –Face scallops / lube from bore (stationary inner / rotating outer) Used in multi-row CRB’s –Spiral bore groove Improved disassembly on roll necks

Cylindrical Roller Bearing Product Overview 5/7/2007CRB Product Overview 8 Torque & Heat Generation  Sources of bearing torque –Elastic deformation (roller-raceway contact) –Cage contact –Flange contact –Lubricant viscous forces

Cylindrical Roller Bearing Product Overview 5/7/2007CRB Product Overview 9 Heat Generation  By design, generate less heat due to minimal friction –Bearing operating temperature must not exceed 250°F (121°C)  Heat will dissipate by oil flow and conduction/convection/radiation through housing material

Cylindrical Roller Bearing Product Overview 5/7/2007CRB Product Overview 10 Speed/Acceleration Considerations  High speeds and acceleration –Concern for large bore and eccentric applications  Lower speeds with light loads –Skid smearing can occur due to lack of roller traction –Min load = 2% of C1

Cylindrical Roller Bearing Product Overview 5/7/2007CRB Product Overview 11 Misalignment  Roller/race profiles –Standard roller/race profiling designed to withstand in/in of misalignment (low to moderate loads) –More complex profiles (MRD) can be used to help reduce edge stresses that develop beyond the defined drops

Cylindrical Roller Bearing Product Overview 5/7/2007CRB Product Overview 12 Misalignment  Flange modifications –Flanges can be heightened, tapered, or include special profiles  Lubrication improvements –Increased oil flow rates to insure contact points generate adequate lube film thickness

Customer Training Timken Learn and Lead Part Numbering

Cylindrical Roller Bearing Product Overview 5/7/2007CRB Product Overview 14 Cylindrical Roller Bearing (CRB) Part Numbering - Metric /XXX Designation Cage Design E.TVP, M, S

Cylindrical Roller Bearing Product Overview 5/7/2007CRB Product Overview 15 Cylindrical Roller Bearing (CRB) Part Numbering  CRB Configurations –NJ =Cylindrical roller radial bearing (2 ribs on outer ring, 1 rib on inner ring) –NU =Cylindrical roller radial bearing (2 ribs on outer ring, cylindrical inner ring) –NUP =Cylindrical roller radial bearing (2 ribs on outer ring, 1 fixed rib and 1 loose rib/flat washer on inner ring) –RNU =Cylindrical roller radial bearing (2 ribs on outer ring, without an inner ring)  Series –10 = width series 1; diameter series 0 (dimension series 10 – 2 = width series 0; diameter series 2 (dimension series 02) –22 = width series 2; diameter series 2 (dimension series 22) – 3 = width series 0; diameter series 3 (dimension series 03) –23 = width series 2; diameter series 3 (dimension series 23)

Customer Training Timken Learn and Lead Timken Cylindrical Roller Bearing Product Overview Part B End of Module Close this window and return to the main menu