Methyl Cyanoacrylate Superglue By: Nicole LeBlanc.

Slides:



Advertisements
Similar presentations
Choose the appropriate tools or instruments and use relevant safety procedures to complete scientific investigations.
Advertisements

+ Chemical Spill Response in the Lab. + Chemical Spills Spills can seriously disrupt laboratory operations. If handled properly, a spill may be nothing.
LAB SAFETY Objective(s): To review and summarize laboratory safety concepts and laboratory practices.
Hand protection. Avoidance of direct contact with materials Automation, closed system Efficient ventilation Protective gloves Barrier cream Skin care.
Annual Formaldehyde Awareness Training
OHIO PESTICIDE APPLICATOR TRAINING Unit 7 Personal Protective Equipment.
The Nature of Science: Unit 1A Safety, Equipment, and Measurement.
27 April 2001Carmen Omota 1 A Presentation by Carmen Omota.
Tell how compounds can be separated into their individual elements. The opposite of a mixture is a pure substance. Using this information, write what you.
Unit 4: Fingerprints 4.5 Collecting Prints. Kendall/Hunt Publishing Company 2 Developing Latent Prints  Developing a print requires substances that interact.
Reaction Rates, Catalysts and Collision Theory. Rates of reaction The rate of a reaction measures how fast it happens. Increased reaction rate means that.
What is a Fingerprint?.
The world of glue.
Toluene By Thu Ha Bio 2B Dr. Blumberg May 18, 2005.
Vanderbilt Student Volunteers for Science Fall 2009
CHEMICALS IN THE WORKPLACE Esra YILMAZ Environmental Engineer.
Training on the hazards of formaldehyde in the workplace
M.S.D.S.. MSDS MSDS Provides Information What is it Who makes or sells it Where the company is located Why it’s hazardous How you can be exposed to.
Paint Safety A Stroke of Genius. Chemical Hazards Work in a well ventilated area Wear a safety mask and goggles If paint gets in your eyes or mouth, wash.
An Introduction to WHMIS The Workplace Hazardous Materials Information System.
About Risk Assessment Sophia CHENG 3 Nov 2009.
OHIO STATE UNIVERSITY EXTENSION Ohio Pesticide Applicator Training Unit 7 Personal Protective Equipment.
WHMIS System Workplace Hazardous Materials Information System.
Changes Physical & Chemical. Physical Change A physical change is a change in size, shape, form, or state of matter in which the matter’s identity stays.
Observations of Substances Chemistry Department Minneapolis Community & Technical College Intro to Chemistry Chem1020 Lab 1.
MSDS Material Safety Data Sheet
“ GREEN” FLOOR CARE “ GREEN” FLOOR CARE Resource Center Presentations & Reports Other Helpful Sites.
DO NOW: Answer the following question in your notebook. Use examples and write at least 2 sentences. Why prepare for a scientific investigation? --Good.
Chapter 1, Section 5.  We will leave page 10 blank. This is where the vocabulary belongs. Once we complete our lab safety instruction manual project,
1. General Rules 2. Rules regarding Heating & Mixing 3. Rules regarding Accidents.
VOC’s. Review of Signs and Symptoms People with allergies have hyperactive immune systems that think harmless things, such as pet dander, are dangerous.
Laboratory Safety modified from
METHYL CYANOACRYLATE BY VICTORIA TEMPLE. IS THE MOLECULE NATURRALLY OCURRING AND IS IT SYNTHESIZED? THIS MOLECULE IS NOT NATURALLY OCCURING. IT CAN BE.
Dangerous Throughout Canada, standard symbols are used to identify ___________ materials. The ______________________ _____________________________ (________)
Matt Hardie.  Discovered by Chaim Weizman a russian scientist during WWI by preforming the fermentation of glucose  Which produced a sugar with 6 carbon.
Control of Substances Hazardous to Health
Chapter 5.1 Chemical Reactions.
Formaldehyde. By: Pedro and Phavady. What is it? Formaldehyde is a colorless, toxic, potentially carcinogenic, flammable, strong-smelling chemical Used.
Introduction to the Electronics Laboratory
KITCHEN SAFETY SAFE USE OF CHEMICALS Bureau of Workers’ Comp PA Training for Health & Safety (PATHS) 1PPT
The Nature of Science: Unit 1A Safety, Safety Symbols and Measurement.
Recap on different adhesives and where to use them.
Here let's discuss the difference between atoms, elements, compounds and mixtures. First let's discuss element : Element is the basic substance that can't.
Workplace Hazardous Materials Information System (WHMIS) Hazardous Household Product Symbols (HHPS) There are two systems of hazardous materials labeling.
What are the qualities of a good scientist?. Introduction to Science Thinking Scientifically & Safety in Science.
Specification section 3.4
Mineral research project By: Nate Reckker and Ben Witkowski.
The Synthesis and Breakdown of Polymers Let’s review: 1.What are the 4 macromolecules of life?
SNC2D Safety. Hazardous Household Waste Household hazardous waste (hhw) is any substance that may be harmful to you, animals, or the environment when.
Distillation Definition: a method of separating mixtures based on differences in their volatilities in a boiling liquid mixture. Distillation is a physical.
Training Charts Chemical Handling and Safety
Semester Exam Demo Project
SNC2P Safety Symbols. Science Science is a way of gaining knowledge and understanding of our world. It is the desire to understand how and why things.
Chemical Bonds and Crystalline Solids 12/9/08. Chemical Bonds  Covalent Bond- a chemical bond formed by the sharing of electrons.  Ionic Bond-a chemical.
Reactive Chemicals. © Business & Legal Reports, Inc Session Objectives You will be able to: Identify reactive chemical hazards Understand the nature.
Joining Techniques To understand which adhesive(s) is the most suitable for joining like and unlike materials To understand the advantages and disadvantages.
Safety matters related to the use of acids and alkalis 10.7 Safety matters related to the use of acids and alkalis.
Vanderbilt Student Volunteers for Science Fall 2009
FINAL STUDY GUIDE 2016.
Chapter 12 Part 2.
OSHA.
Polymers Nat
Plastics Plastics are man-made materials and they are made from crude oil.
PH Neutral some basic stuff.
Chapter 12 Part 2.
Classification of Fingerprints
C4: Hazards.
Semi-Permanent Release Agents for Silicone Rubber
Presentation transcript:

Methyl Cyanoacrylate Superglue By: Nicole LeBlanc

Is the molecule naturally occurring? Is it synthesized? Where does it come from? It is not naturally occurring. It is not naturally occurring. It can be synthesized or made form organic resins. It can be synthesized or made form organic resins. CA’s (cyanoacrylate adhesives) are produced in heated kettles. Initial ingredient is ethyl cyanocetate, placed into a glass-lined kettle with revolving mixing blades, this material is then mixed with formaldehyde. The mixing triggers condensation, a chemical reaction that produces water. The water is then evaporated as the kettle is heated. CA’s (cyanoacrylate adhesives) are produced in heated kettles. Initial ingredient is ethyl cyanocetate, placed into a glass-lined kettle with revolving mixing blades, this material is then mixed with formaldehyde. The mixing triggers condensation, a chemical reaction that produces water. The water is then evaporated as the kettle is heated.

What are the direct and indirect uses of this product? This product is used to form a surface attachment between discrete materials. This product is used to form a surface attachment between discrete materials. Superglue forms the strongest bonds and clean breaks of non-porous materials, such as plastic, rubber, and metal. Once exposed to the air, it bonds instantly and sets in seconds. Cyanocrylates are mainly used as adhesives. Superglue forms the strongest bonds and clean breaks of non-porous materials, such as plastic, rubber, and metal. Once exposed to the air, it bonds instantly and sets in seconds. Cyanocrylates are mainly used as adhesives.

How has the synthesis of this molecule changed its uses/cost? Superglue began selling as a commercial product in Superglue began selling as a commercial product in Different sizes of tubes cost different prices. Range from $1.00 – $10.00 or higher. The bigger the tube the higher the price. Different sizes of tubes cost different prices. Range from $1.00 – $10.00 or higher. The bigger the tube the higher the price.

When was it discovered? How was it discovered? This product was first discovered in 1949 and invented in 1951 by Dr. Harry Coover. This product was first discovered in 1949 and invented in 1951 by Dr. Harry Coover. Coover was working for Kodak laboratories, he was working with cyanoacrylates that seemed to be stuck to everything they touched! Coover failed to see their potential as adhesive until one of his research students made ethyl cyanoacrylate, the main constituent of superglue. On measuring the refractive index to determine the purity of his sample, he found that he couldn’t separate the two prisms. Something no one has ever seen before. Coover was working for Kodak laboratories, he was working with cyanoacrylates that seemed to be stuck to everything they touched! Coover failed to see their potential as adhesive until one of his research students made ethyl cyanoacrylate, the main constituent of superglue. On measuring the refractive index to determine the purity of his sample, he found that he couldn’t separate the two prisms. Something no one has ever seen before.

Direct and indirect risks of using this product: Flammable Flammable Toxicity Toxicity Reacts with cotton, which can cause serious burns Reacts with cotton, which can cause serious burns Heating the polymer produces gaseous products strongly irritant to lungs and eyes Heating the polymer produces gaseous products strongly irritant to lungs and eyes Recommended workers do not exceed exposures over 2ppm (8mg/m3) over an eight-hour shift. Fumes can irritate the eyes, nose and throat. Recommended workers do not exceed exposures over 2ppm (8mg/m3) over an eight-hour shift. Fumes can irritate the eyes, nose and throat.

Direct and indirect benefits from this product: Easy to produce Easy to produce Very sticky Very sticky Holds objects together Holds objects together

Alternatives that could be used that may lesson the risks/safety precautions: Wear gloves while using product Wear gloves while using product Read application instructions beforehand Read application instructions beforehand Close lid tightly after use Close lid tightly after use Avoid cotton and wool Avoid cotton and wool Choose a well ventilated work area Choose a well ventilated work area