The Bell Camera1 Trainer Training The Bell Camera

2 3 TV VIDEO SWITCH Watch the bell or the slider

The Bell Camera3 Setting Up Turn on the power to the equipment rack –switch on the double power socket located under the bench to the right of the ringing chamber door

The Bell Camera4 Setting Up Switch on the TV set –press the round black button –check that the red light comes on TV

The Bell Camera5 Setting Up Set up the TV channel –press the ‘TV’ button on the remote control –check that the TV displays a blue screen

The Bell Camera6 Open the VCR front panel cover (pull forward with finger) Switch the VCR on Setting Up

The Bell Camera7 Setting Up Select Auxiliary Input 2... Press ‘TV PROGRAM’ V on fold down panel –display panel shows ‘AUX INPUT’

The Bell Camera8 Setting Up Select Auxiliary Input 2... Press button AV/S SEL –display panel shows ‘AUX INPUT 2’

The Bell Camera9 Lighting Switch on the bell chamber lights –If the bell chamber light switch has been left ON you will be able to switch the main floodlight on from the landing outside the ringing chamber Plug in the additional ‘slider light’ –This is the orange plug in the right hand cupboard

The Bell Camera10 Changing the View Use the switch on top of the VCR to change views between the bell and the stay

The Bell Camera11 Fault Finding If picture seems reversed out…switch the camera off and on again If picture doesn’t appear…make sure the Handling Camera is disconnected from the VCR