© DIAMOND SA / / 1 CLEANING A focal point in fiber optics

© DIAMOND SA / / 2 Why do we clean fiber optic connector endfaces ? Why is an optimized inspection so important ? The following answers could be suitable  Cleanliness is one of the main conditions for proper functioning of fiber optic system.  An optimized fiber optic inspection is the best way to detect the causes of the typical system performance degradations: Poor analog transmission quality Increase of the digital bit error rates Reduction of the coupled light power Receiver input power outside optimum operating range Dirty connectors may cause damage to their mated counterparts As solution for these problems DIAMOND offers a wide range of products in order to allow a safe connector inspection and cleaning. Some questions about this subject came spontaneously?

© DIAMOND SA / / 3 Cleaning Kit  Easy field inspection of ferrules and fiber endfaces thanks to the handy microscope  Optimal cleaning tools for safe cleaning of connectors and mating adapters  Interchangeable specific connector adapters for inspection and cleaning of different connector types DIAMOND’s cleaning kit is suitable for easy inspection of unmated connectors inspection and corresponding cleaning procedure.

© DIAMOND SA / / 4 Hand Inspection Microscope  Compact, light weight, handy construction  Interchangeable holders to accommodate ferrules of different diameters and connector types  Built-in infrared filter for eye- protection  Internal battery powered lamp for the integrated illumination system DIAMOND’s Hand Inspection Microscope is convenient for inspecting ferrule and fiber endfaces in the field or in the laboratory

© DIAMOND SA / / 5 Quality, Safety and reliability “one-hand” operation VIM DIAMOND VIDEO INSPECTION MICROSCOPE

© DIAMOND SA / / 6 DIAMOND VIM Optical quality requirements Inspection of global fiber surface as well as surrounding area of about 0.3 mm (contact region). Up to 400x magnification for fiber inspection, and 200x for surrounding inspection trough motorized zoom-in-out function

© DIAMOND SA / / 7 DIAMOND VIM Safety  Product liability Improved eye safety by means of CCD color camera for electronic visualization

© DIAMOND SA / / 8 DIAMOND VIM Standard configuration  The three-piece concept 1)Ergonomic hand held probe with integrated CCD color camera, motorized focus and zoom features, auto shut- off function after 5 min. 2)Table top & wrist band fixation 3.5” TFT active matrix color display unit. (adjustable brightness) 3)Rechargeable battery with clip (belt style), 7 hours continuous use

© DIAMOND SA / / 9 DIAMOND VIM USB Configuration  USB configuration  Inspection probe  USB 2.0 cable  Laptop or PC (not included)

© DIAMOND SA / / 10 DIAMOND VIM Inspection probe Inspection probe for inspection of both, unmated connectors as well as in-adapter connectors with 2.5 or 1.25 mm (PC and APC) ferrules 2.5 mm and 1.25 mm universal adapters Interchangeable extended probe for inspection of in- adapter connectors

© DIAMOND SA / / 11 DIAMOND VIM Specific adapters Specific adapters for unmated connectors E-2000™ PC/APC DIN PC/APC ST PC F-3000™ (LC) PC/APC SC PC/APC FC PC/APC Specific adapters for in- adapter connectors E-2000™ PC/APC DIN PC ST PC F-3000™ / MU PC SC PC/APC FC PC Other upon request !!

© DIAMOND SA / / 12 DIAMOND VIM Fixations Battery pack Display unit Display wrist band Magnetic stand for Table stand

© DIAMOND SA / / 13 DIAMOND VIM Available kits  Complete inspection set, cleaning kit, USB 2.0 cable and carrying case Dimensions:540 x 420 x 210 mm Weight:6 Kg (12.5 lbs)

© DIAMOND SA / / 14 DIAMOND VIM Available kits  USB 2.0 inspection set including soft padded pouch  Complete inspection set, USB 2.0 cable and carrying case

© DIAMOND SA / / 15 DIAMOND VIM Options DescriptionOrder Numbers Visual Fault Locator VFL (Pen style)BEZ Cleaning kit (Cletop /Replacement Reel)GBZ BDA Ferrule cleaner 1.25mmBDA Specific adapters for unmated connectorsUpon request and in-adapter connectors