The Sodem® Power System “Plus” For Large Bone Surgery More power to spare for demanding orthopedic procedures: Three Power Sources: Battery, Electric, Air. The largest choice of Functions Ever. The Unique Battery Management Technology

The Sodem® Power System “Plus” For Large Bone Surgery More power to spare for demanding orthopedic procedures: Three Power Sources: Battery, Electric, Air. The largest choice of Functions Ever. The Unique Battery Management Technology

The Sodem® Power System “Plus” fully modular, with power to spare Designed for the most demanding orthopedic procedures, the Sodem Power System provides maximum and identical reaming, drilling, sawing and tapping power in either electric or pneumatic or cordless configurations. Surgeons may use either handle, or both, to perform any procedure. For complete ver-satility both handles accept a full range of adapters for numerous standard and special attachments. All Sodem System components are manufactured of high-tech Stainless steels and stainless materials to exacting Swiss standards of quality precision and reliability. Power to match the Surgeon’s preference: CORDLESS OR ELECTRONIC CONSOLE OR PNEUMATIC Cordless convenience at full power: Optimal power/weight ratio, modern Ni Cad technology give the battery-operated handle substantially more power than any other cordless unit. A single charge powers and entire procedure; rapid recharging Supports frequent re-use. Power console for repeated daily use: This heavy duty Electronic Power Supply is allowing to quickly cord convert the Battery Hand piece. The slim, fully sterilizable power cord, plugs into the battery while offering the maneuverability the maneuverability required for close-in surgery. Pneumatic power with easy control: The pneumatic power with double flux hose locates speed regulators on the handle for instant control by the surgeon. Both pneumatic and battery handles utilize range of attachments.

The Sodem® Power System “Plus” fully modular, with power to spare Designed for the most demanding orthopedic procedures, the Sodem Power System provides maximum and identical reaming, drilling, sawing and tapping power in either electric or pneumatic or cordless configurations. Surgeons may use either handle, or both, to perform any procedure. For complete ver-satility both handles accept a full range of adapters for numerous standard and special attachments. All Sodem System components are manufactured of high-tech Stainless steels and stainless materials to exacting Swiss standards of quality precision and reliability. Power to match the Surgeon’s preference: CORDLESS OR ELECTRONIC CONSOLE OR PNEUMATIC Cordless convenience at full power: Optimal power/weight ratio, modern Ni Cad technology give the battery-operated handle substantially more power than any other cordless unit. A single charge powers and entire procedure; rapid recharging Supports frequent re-use. Power console for repeated daily use: This heavy duty Electronic Power Supply is allowing to quickly cord convert the Battery Hand piece. The slim, fully sterilizable power cord, plugs into the battery while offering the maneuverability the maneuverability required for close-in surgery. Pneumatic power with easy control: The pneumatic power with double flux hose locates speed regulators on the handle for instant control by the surgeon. Both pneumatic and battery handles utilize range of attachments.

The most complete, compatible range of attachments. High-performance, high-torque: With variable speed, bi-directional motors and safety switches, handles provide full power with easy control during the heaviest use. The most complete, compatible range of attachments. A wide variety of reamer adapters: Both handles accept adapters for all popular reamers (AO, Charnley, Harris, Hudson, Jacobs, Trinkle and Zimmer). Fast and easy conversion: Positive snap-lock connections for all adapters and attachment ensures rapid release and positioning. No wrenches are required. No wrenches are required. Safety locks prevent saw adapters from releasing in motion. No need to unplug, replug or release handles while changing. Lightweight, ergonomic design: Smaller and lighter than other units handles are balanced to maximize precision control, minimize surgeon fatigue. They have no noticeable vibration in use and are fully cannulated for easy wire insertion. Adapters/attachments for every purpose: Reamers and Drills, 900 reaming and drilling adapters, oscillating and reciprocating saws in a range of lengths and thicknesses, chucks, wire drivers, screwdrivers, taps and depth limiters may all be used interchangeably on either handle Cost-effective modularity: With full interchangeability of handles, adapters and attachments, a single Sodem Power System serves the needs and preference of an entire surgical staff economically and efficiently Fully sealed, water-resistant: Maintenance-free lubeless motors prevent accidental water infiltration, air-borne contamination. Handles and adapters are fully ETO or steam autoclavable; batteries are ETO or flash autoclavable. All adapters may be set every 900 intervals for better view and access to the operative site.

The most complete, compatible range of attachments. High-performance, high-torque: With variable speed, bi-directional motors and safety switches, handles provide full power with easy control during the heaviest use. The most complete, compatible range of attachments. A wide variety of reamer adapters: Both handles accept adapters for all popular reamers (AO, Charnley, Harris, Hudson, Jacobs, Trinkle and Zimmer). Fast and easy conversion: Positive snap-lock connections for all adapters and attachment ensures rapid release and positioning. No wrenches are required. No wrenches are required. Safety locks prevent saw adapters from releasing in motion. No need to unplug, replug or release handles while changing. Lightweight, ergonomic design: Smaller and lighter than other units handles are balanced to maximize precision control, minimize surgeon fatigue. They have no noticeable vibration in use and are fully cannulated for easy wire insertion. Adapters/attachments for every purpose: Reamers and Drills, 900 reaming and drilling adapters, oscillating and reciprocating saws in a range of lengths and thicknesses, chucks, wire drivers, screwdrivers, taps and depth limiters may all be used interchangeably on either handle Cost-effective modularity: With full interchangeability of handles, adapters and attachments, a single Sodem Power System serves the needs and preference of an entire surgical staff economically and efficiently Fully sealed, water-resistant: Maintenance-free lubeless motors prevent accidental water infiltration, air-borne contamination. Handles and adapters are fully ETO or steam autoclavable; batteries are ETO or flash autoclavable. All adapters may be set every 900 intervals for better view and access to the operative site.

The Sodem® Power System “Plus” Dedicated attachments for every produre Drilling Universal Jacobs Chuck- Accepted a wide variety of drills, pins, accessories for rotational drilling, wire fitting, tapping, screwing, Up to ¼ inch approx (6.5mm) capacity. Slow drilling/screwing adapters – AO. Trinkle and Jacobs styles for drilling and screwing in specific procedures to be combined with the Quick chuck AO style Trinkle, Zimmer reamers or built in Hudson opening (PN1502.IH) and Zimmer opening (PN 1502Z). 90° Intramedullary reaming adapter with AO fitting – for at-the-site reaming, closer access, improved control for intramedullary nailing. Small Chucks – For small rod and wire fitting,. available in three sizes for wires from 0.8 to 3mm; to be combined with the Quick chuck AO style Keyless chuck – accepts a wide Variety of drills, pins, accessories for rotational drilling, wire fitting, tapping, screwing. Up to ¼ approx (6.5mm) capacity Radiolucent Drilling Radiolucent angled drill adapter – for accurate drilling through distal intramedullary nails, under the image intensifier. The radiolucent angle gearing allows good visibility surgeon remains outside the main area of radiation. Sawing Oscillating saw adapter – With offset design and four – position rotation for superior access to the surgical site. Accepts Sodem blades up to 120mm long from 0.5 to 1.6 mm thick. Quick chuck, AO style- for times saving connection of twist drills, taps, screwdrivers, all applications needing rotational movement. Reciprocating saw adapter – for large bone osteotomies and removal of femoral head, with four position rotation for maximum convenience, reduced vibrations. Pulse lavage Pulse lavage adapter – for pulsed irrigation during operative procedure in traumatology and in the knee and hip area. Minimizing and quantity of disposal. System is supplemented by disposable parts. Tubings, cannulas and protective equipment. 900 drilling adapter, AO style – for access in cavities, shoulders, joints, at- the-site drilling to place acetabular screws behind the acetabular cup in high surgery. Sternum saw adapter – for sternal osteomy during primary open heart surgery. Small (children) and large (adult) blade guards available. Quick chuck, small Trinkle style – for time-saving quick connection of twist drills, taps, screwdrivers, all applications needing rotational movement. Power Tapping Tapping adapter, AO style – With depth limiter, automatic forward and reverse control, for safe power tapping of previously drilled holes. Reaming Reaming adapter – with high torque for efficient reaming of acetabulum and femur, smoothing bores. Available with AO opening (PN 1502.IS) that accepts adapter for Charnley, Harris, Hudson, Jacobs, Quick chuck, DHS style – for flexible use of screwdrivers (Specially suitable for use with small acetabulum). Automatic wire driver – for inserting pins in large bones, wires in small bones, 1 to 4 mm in diameter

The Sodem® Power System “Plus” Dedicated attachments for every produre Drilling Universal Jacobs Chuck- Accepted a wide variety of drills, pins, accessories for rotational drilling, wire fitting, tapping, screwing, Up to ¼ inch approx (6.5mm) capacity. Slow drilling/screwing adapters – AO. Trinkle and Jacobs styles for drilling and screwing in specific procedures to be combined with the Quick chuck AO style Trinkle, Zimmer reamers or built in Hudson opening (PN1502.IH) and Zimmer opening (PN 1502Z). 90° Intramedullary reaming adapter with AO fitting – for at-the-site reaming, closer access, improved control for intramedullary nailing. Small Chucks – For small rod and wire fitting,. available in three sizes for wires from 0.8 to 3mm; to be combined with the Quick chuck AO style Keyless chuck – accepts a wide Variety of drills, pins, accessories for rotational drilling, wire fitting, tapping, screwing. Up to ¼ approx (6.5mm) capacity Radiolucent Drilling Radiolucent angled drill adapter – for accurate drilling through distal intramedullary nails, under the image intensifier. The radiolucent angle gearing allows good visibility surgeon remains outside the main area of radiation. Sawing Oscillating saw adapter – With offset design and four – position rotation for superior access to the surgical site. Accepts Sodem blades up to 120mm long from 0.5 to 1.6 mm thick. Quick chuck, AO style- for times saving connection of twist drills, taps, screwdrivers, all applications needing rotational movement. Reciprocating saw adapter – for large bone osteotomies and removal of femoral head, with four position rotation for maximum convenience, reduced vibrations. Pulse lavage Pulse lavage adapter – for pulsed irrigation during operative procedure in traumatology and in the knee and hip area. Minimizing and quantity of disposal. System is supplemented by disposable parts. Tubings, cannulas and protective equipment. 900 drilling adapter, AO style – for access in cavities, shoulders, joints, at- the-site drilling to place acetabular screws behind the acetabular cup in high surgery. Sternum saw adapter – for sternal osteomy during primary open heart surgery. Small (children) and large (adult) blade guards available. Quick chuck, small Trinkle style – for time-saving quick connection of twist drills, taps, screwdrivers, all applications needing rotational movement. Power Tapping Tapping adapter, AO style – With depth limiter, automatic forward and reverse control, for safe power tapping of previously drilled holes. Reaming Reaming adapter – with high torque for efficient reaming of acetabulum and femur, smoothing bores. Available with AO opening (PN 1502.IS) that accepts adapter for Charnley, Harris, Hudson, Jacobs, Quick chuck, DHS style – for flexible use of screwdrivers (Specially suitable for use with small acetabulum). Automatic wire driver – for inserting pins in large bones, wires in small bones, 1 to 4 mm in diameter