JANE PETERS: ELECTRICAL ENGINEER MATT DEBOER: MECHANICAL ENGINEER ANDREW JENSEN: CIVIL ENGINEER CHRIS THOMPSON: CIVIL ENGINEER LYNDSAY ADAMS: MECHANICAL.

Slides:

Advertisements

Similar presentations

Gears 2 nd Period TED. What is a gear? A toothed mechanical part, e.g. a wheel or cylinder, that engages with a similar toothed part to transmit motion.

Advertisements

Early Effort Estimation of Business Data-processing Enhancements CS 689 November 30, 2000 By Kurt Detamore.

Systems in Technology Objectives:  Define: system, component, troubleshooting, feedback, and automation  Draw and label an open and closed loop systems.

Steve Gunderson (916) Utah State University March 11, 2010.

TemperSure Shower Temperature Control System 1 Shower Temperature Control System Tempero Systems Stephen Au-Yeung Francis Merin Victor Tai Jason Wong.

Alexander Moulton Marie Hammer Xingwang Gao Andrew Robertson Team Lead Mechanical Engineer Electrical Engineer.

P10029: Control Enhancements for Air Muscle Biomimetic Hand October 16, 2009 Customer: Dr. Lamkin-Kennard Faculty Guide: Ed Hanzlik Zach Wessner, Jaci.

P11310: Parabolic Dish Autopoint Solution Project Family Team Leader: Trae Rogers (ME) Project Engineer: Pat Ryan (EE) Kyle Norlin (ME) Chris Reed (CE)

LFTB Proprietary Information 1 Fuser test bed ™ R I T MSD1 Project Review February 22, 2007 Fuser Test Bed P07501 IE TEAM Justin McMillan – Project Lead.

Overview of Phase 4 Performance Validation Methods and Techniques.

ELM4701/02: ELM Projects I & II The mini-project has served as a practice project. It has given us the opportunity to explain our expectations and you.

RIT Senior Design I, Project Review P07310: Electronic Shifted Manual Transmission George Slack Team Guide Jason BotterillTeam Leader, Mechanical Engineer.

Electro-Pneumatic Pinball ELM 4702 ELM Project SPRING 2003.

Team Hybrid  Daniel Farley  John Hoyt  Sean Frost Hoyt.

Michelle Bard (ME) Alexander Ship (ME) David Monahan (ME) Kristin Gagliardi (ME) October 12, 2009.

Automatic Dental Bur Loader NCDA Dental Products Development Group Progress Review Team 99.06: Jason Dickey, Greg Frantz, Allison Martin, Nancy Meyer Sponsor:

Team CNH Design a less expensive propulsion control system with equivalent or better performance than existing hardware for Hydrostatic Windrower Machine.

Permanent Magnet Motor Modeling Software Evaluation Kaila Krieser, EE Dan Montgomery, EE Craig Christofferson, EE Mark Wisted, EE Dr. Mani Mina, Advisor.

Timers - PAGE 1/20 - Timer Products. Timers - PAGE 2/20 - Multitechnology PROCESSING ACTUATING SENSING COMMUNICATING PROCESSING SOLUTIONS.

Sensors and Actuators John Errington MSc. Sensors and Actuators Sensors produce a signal in response to a change in their surroundings e.g. Thermostat.

MECHANICAL ENGINEERING & ELECTRICAL ENGINEERING RAUL REYES 1 ST PERIOD.

Project # Team Members: Jeff Youngs, ME Jon Schneider, ME Ashish Rathour, EE Glenn Carroll, EE Tai To, EE Mayank Rathour, EE Faculty Advisors: Faulty.

Viking Pump Flow Manager - Phase 2 Senior Design May

Corolla Electric Power Steering PE June, 2010.

Welcome To the Future of Education in Industrial Automation and Pre-Engineering.

3-D Scanning Robot Steve Alexander Jeff Bonham John Johansson Adam Mewha Faculty Advisor: Dr. C. Macnab.

PLC introduction1 Discrete Event Control Concept Representation DEC controller design DEC controller implementation.

PLC: Programmable Logical Controller

1 I n t u i t C o n f i d e n t i a l Construction Estimating Software Jeff Gerardi | President | Solution Introduction.

Level 2 Unit 4 Producing Engineering Solutions Engineering Diploma Level 2 Unit 4 Producing Engineering Solutions An Approach to Unit Delivery and Assessment.

IT 264 Industrial Fluid Power

INTEGRATED SYSTEMS 1205 Technology Education A Curriculum Review Sabine Schnepf-Comeau July 19, 2011 ED 4752.

Workforce On-Line Manufacturing Skills Pathways

WYMAN GORDON ROCHESTER INSTITUTE OF TECHNOLOGY Multi-Disciplinary Senior Design Team Nick Perrotte (ME)Lead Mechanical Engineer John Knight (ME)Project.

To come up with a practicum project that full filled the 411 requirements Create a fun project that would get kids interested in science and engineering.

KAITLIN PERANSKI: IE, PROJECT MANAGER JEREMY BERKE: EE, SCRIBE/LEAD SOFTWARE CHRIS CAPORALE: EE, LEAD HARDWARE SPENCER WASILEWSKI: ME, MODELING/MACHINIST.

Viking Pump Flow Manager - Phase 2 Senior Design May

Team Members: Allen Baragar Dustin Thompson Jose Membreno Katelyn This MECT 4275 Spring 2014 Industrial Advisors: Paul Tyllick- System Interface Supervisor,

The Software Development Life Cycle: An Overview Presented by Maxwell Drew and Dan Kaiser Southwest State University Computer Science Program.

Information Technology Professional Services (ITPS)

Driver Attentiveness Detection System (DADS) P roject Plan Project Team Members  Matthew Parks – Project Leader  Steve Tegtmeyer  Chris Klutch  Justin.

New Altitude Heading and Reference System with Improved Long-Term stability (and no GPS) doc. Ing. Pavel Pačes, Ph.D. measure.feld.cvut.cz/paces.

EDM Collaboration Meeting, October 5-7, 2006 WBS He Services (He3S) “Homework” Steve Williamson.

Chapter 1 Introduction § 1.1 Essential Concepts § 1.2 Scope

Team Concept and Key Issues AME 470: Senior Design ASME Bulk Material Transporter Matt Bertke, Paul DeMott, Patrick Hertzke, Will Sirokman 16 September.

P16680: AATech Universal Oil and Bag System Subsystem Design Review 10/20/15.

Spring CS-EE 481 Lillevik 481s07-l2 University of Portland School of Engineering Senior Design Lecture 2 Technical staff Prototype phase: DEP, TOP.

Wind Turbine Energy Conversion System Design and Integration

Introduction to Operations Management McGraw-Hill/Irwin Copyright © 2012 by The McGraw-Hill Companies, Inc. All rights reserved.

Positioning Sensor for Electric Motor Drive ENGR 498 Senior Design College of Optical Sciences Industrial Affiliates.

Nick Borrego Kristi Bilan T.J. Gebes Assistive Technology Fishing Device University of Wyoming Mechanical Engineering Senior Design Symposium April 2011.

Actuators and Control, Part 5 Grant Agreement No LLP UK-LEONARDO-LMP Project acronym: CLEM Project title: Cloud services for E-Learning.

BASIC AUTOMATIC CONTROLS UNIT 16 ADVANCED AUTOMATIC CONTROLS

 System Requirement Specification and System Planning.

Machine Elements in Mechanical Design Prepared by: Misrty Dipen

Manufacturing Engineering Hydraulic and Pneumatic Systems

P07203 Dynamometry Laboratory Infrastructure

Baja Hybrid Drivetrain Design P14224

APEX Electrical Interconnection Consultants, LLC

Project Members: M.Premraj ( ) G.Rakesh ( ) J.Rameshwaran ( )

Objectives 1 – introduction 2 – mechanical design

AUTOMATIC SHIFT CONTROLS FOR ATV SPONSOR: POLARIS INDUSTRIES

Baja Hybrid Drivetrain Design P14224

JAQUET Products for large Diesel and Gas Engines

Project Readiness Review P10029 – Air Muscle Artificial Limb

Find the right fit for you!

Production and distribution

System Dynamics Filtering Laboratory

Power Steering Test Stand

Find the right fit for you!

Presentation transcript:

JANE PETERS: ELECTRICAL ENGINEER MATT DEBOER: MECHANICAL ENGINEER ANDREW JENSEN: CIVIL ENGINEER CHRIS THOMPSON: CIVIL ENGINEER LYNDSAY ADAMS: MECHANICAL ENGINEER MADISON DELANEY: MECHANICAL ENGINEER BIOVALVE BIOVALVE - Project Plan I OWA S TATE U NIVERSITY ENGR 466: Spring 2013 Team MD3

Project Overview BIOVALVE - Project Plan IOWA STATE UNIVERSITY Solution  Electric actuating pinch valve .5-2% accuracy  Interface with external system  Position verification  Calibration Method Issues  Lean manufacturing  Risk reduction  Portable system

Project Overview BIOVALVE - Project Plan IOWA STATE UNIVERSITY BIOVALVE Valve Position Control MovementExtendRetractHold Position Verification Calibration Position Detection Detection RelayOutput ResultCompare External Communication Receive Input Transmit Output

Project Overview BIOVALVE - Project Plan IOWA STATE UNIVERSITY Project Scope Motor Control System Feedback System Positioning Calibration Method

Project Overview BIOVALVE - Project Plan IOWA STATE UNIVERSITY Previous Works 2011 Team  Redesigned 2010 Valve  Chose Motor  Integrated Control Equipment  DAQ and Speed Control  Proved Successful Motor Torque Requirements

Market Analysis BIOVALVE - Project Plan IOWA STATE UNIVERSITY Current Products  Manual and Pneumatic Competitive Products  Lack Functional Requirements Fisher’s Current Product

Design Concepts BIOVALVE - Project Plan IOWA STATE UNIVERSITY

Work Plan BIOVALVE - Project Plan IOWA STATE UNIVERSITY GANTT Schedule

Project Transition BIOVALVE - Project Plan IOWA STATE UNIVERSITY Assure the Customer Requirements Were Met Team Evaluation Recommendations for Future Improvements

References BIOVALVE - Project Plan IOWA STATE UNIVERSITY Adams, Lyndsay, et al. "DMADVR Toolbox Group MD3." Iowa State University, Excel Workbook. Beaupre, Mario and Alain Lamoureux. Method and sytem for dispensing precise amount of fluid with automatic set rest. Patent US September Beck, Harold and Scott Kempft. "Simple Improvements, Significant Results." Power Engineering November Emerson Process Management. "BIOVALVE Drive System Project Proposal Form." Iowa State University, —. Products: Electric Actuators February —. Products: Manual Actuators February —. Products: Pneumatic Actuators February Everett, Alexander, Jorge Hambleton and Vincent Kaliwata. "Electrically Actuated Bio Valve Project Report." Iowa State University, Ripka, Pavel. "Advances in Magnetic Sensors." Czech Technical University, 13 July Lecture. Robinson, Jason. ICI's Actuator and Valve Industry Blog. 9 October Febraury Westwater, Greg. Customer Requirements Feedback MD3. 8 February Westwater, Gregory. Senior Design Engineer, New Product Development MD3 ENGR