Basic Electronics Dr. Imtiaz Hussain Assistant Professor Mehran University of Engineering & Technology Jamshoro

Slides:

Advertisements

Similar presentations

Transistors and transistor circuits

Advertisements

Recommended Books Robert Boylestad and Louis Nashelsky, “Electronic Devices and Circuit Theory”, Prentice Hall, 7th Edition or Latest. Thomas L. Floyd,

TRANSISTOR. TRANSISTOR Background and Introduction A semiconductor device that Amplifies, Oscillates, or Switches the flow of current between two terminals.

BIPOLAR JUNCTION TRANSISTORS (BJTs)

Chapter 5 Bipolar Junction Transistors

Transistors These are three terminal devices, where the current or voltage at one terminal, the input terminal, controls the flow of current between the.

MOSFETs Monday 19 th September. MOSFETs Monday 19 th September In this presentation we will look at the following: State the main differences between.

Bipolar Junction Transistors

Bipolar Junction Transistor

STEVTA -Training of Trainers Project

Basic Electronics Dr. Imtiaz Hussain Assistant Professor Mehran University of Engineering & Technology Jamshoro

Storey: Electrical & Electronic Systems © Pearson Education Limited 2004 OHT 21.1 Bipolar Transistors  Introduction  An Overview of Bipolar Transistors.

Transistors They are unidirectional current carrying devices with capability to control the current flowing through them The switch current can be controlled.

Chapter 28 Basic Transistor Theory. 2 Transistor Construction Bipolar Junction Transistor (BJT) –3 layers of doped semiconductor –2 p-n junctions –Layers.

Power Electronics Lecture-9 Power Transistors & GTO Dr. Imtiaz Hussain

Transistors Electronics 1 CVSD.

electronics fundamentals

09/16/2010© 2010 NTUST Today Course overview and information.

Chapter 17 Electronics Fundamentals Circuits, Devices and Applications - Floyd © Copyright 2007 Prentice-Hall Chapter 17.

Electronic Devices and Circuit Theory

Module 2 Bipolar Junction Transistor. Learning Outcomes 1.The 3 terminals or regions of a BJT. 2.Construction and symbol of NPN and PNP types 3.Low power.

Chapter 6. Bipolar Junction Transistors (BJTs). Bipolar Junction Transistor Three terminal device Voltage between two terminals to control current flow.

Department of Electronics and Communication Engineering, Manipal Institute of Technology, Manipal, INDIA Subject Code : ECE – 101/102 BASIC ELECTRONICS.

المملكة العربية السعودية وزارة التعليم العالي - جامعة أم القرى كلية الهندسة و العمارة الإسلامية قسم الهندسة الكهربائية ELECTRONIC DEVICES K INGDOM.

Bipolar Junction Transistors (BJTs)

Recap in Unit 2 EE2301: Block B Unit 2.

CHAPTER 7 Junction Field-Effect Transistors. OBJECTIVES Describe and Analyze: JFET theory JFETS vs. Bipolars JFET Characteristics JFET Biasing JFET Circuits.

Bipolar Transistor Review

SEMICONDUCTOR DEVICES. Diodes as a semiconductor devices Symbol and Structure Diodes is made by joining p-types and n- types semiconductor materials.

An introduction to Junction Transistors. BITX20 bidirectional SSB transceiver.

Bipolar Junction Transistors (BJTs) The bipolar junction transistor is a semiconductor device constructed with three doped regions. These regions essentially.

TRANSISTOR.  A transistor is a semiconductor device used to amplify and switch electronic signals and electrical power.  The transistor is the fundamental.

BJTs. Transistor The transistor is the main building block “element” of electronics. A transistor is a semiconductor device used to amplify and switch.

Chapter 4 DC Biasing–BJTs. Copyright ©2009 by Pearson Education, Inc. Upper Saddle River, New Jersey All rights reserved. Electronic Devices and.

Large Part Of This Lecture is Taken From Manipal Institute India

EE 334 Midterm Review. Diode: Why we need to understand diode? The base emitter junction of the BJT behaves as a forward bias diode in amplifying applications.

Electronic workshop Dr. Imtiaz Hussain URL :

Dr. Nasim Zafar Electronics 1 EEE 231 – BS Electrical Engineering Fall Semester – 2012 COMSATS Institute of Information Technology Virtual campus Islamabad.

Bipolar Junction Transistors (BJTs)

1 Concepts of electrons and holes in semiconductors.

Chapter 4 Bipolar Junction Transistors

CORPORATE INSTITUTE OF SCIENCE & TECHNOLOGY , BHOPAL DEPARTMENT OF ELECTRONICS & COMMUNICATIONS BJT -Prof. Rakesh K. Jha.

Transistor (BJT). Introduction BJT (Bipolar Junction Transistor) Vaccum tubes It comes because it is most advantageous in amplification Why it is called.

Chapter 3 Bipolar Junction Transistor (BJT)

DMT 121/3 : ELECTRONIC I Mohd Khairuddin B Md Arshad 1.…Electronic I.…..DMT 121/3.. ChapTer ThRee BIPOLAR JUNCTION TRANSISTORS (BJTs)

1 Concepts of electrons and holes in semiconductors.

BJT Bipolar Junction Transistors (BJT) Presented by D.Satishkumar Asst. Professor, Electrical & Electronics Engineering

Chapter 4 Bipolar Junction Transistors

CSE251 Lecture 8: Introduction to Bipolar Junction Transistor (BJT)

NAME: NIDHI PARMAR ENR.NO.: GUIDED BY: RICHA TRIPATHI.

COURSE NAME: SEMICONDUCTORS Course Code: PHYS 473 Week No. 5.

COURSE NAME: SEMICONDUCTORS Course Code: PHYS 473 Week No. 8.

TRANSISTORS AND THYRISTORS

Regions of a Transistor A Bipolar Junction Transistor is a three terminal device containing 3 regions: Emitter, Base and Collector.

DC Biasing - BJTs Chapter 4 Boylestad Electronic Devices and Circuit Theory.

Chapter 4 Bipolar junction transistor Ir. Dr. Rosemizi Abd Rahim 1 Ref: Electronic Devices and Circuit Theory, 10/e, Robert L. Boylestad and Louis Nashelsky.

CHAPTER 10 AC Power Bipolar Junction Transistors: Operation, Circuit Models, and Applications.

Bipolar Junction Diode & DC Mr. Zeeshan Ali, Asst. Professor

Bipolar Junction Transistors (BJTs)

EELE 2321 – Electronics Spring, 2013 Bipolar Junction Transistor (BJT) Structure Eng. Wazen M. Shbair.

HASMUKH GOSWAMI COLLAGE OF

Chapter 1 – Revision Part 2

Transistor Characteristics

Electronics Fundamentals

Electronic Fundamental Muhammad Zahid

Lecture 4 OUTLINE Bipolar Junction Transistor (BJT)

Solid State Electronics ECE-1109

BIPOLAR JUNCTION TRANSISTOR (BJT)

Bipolar Junction Transistors Md. Rabiul Islam Dept. of Biomedical Engineering 8/3/

Presentation transcript:

Basic Electronics Dr. Imtiaz Hussain Assistant Professor Mehran University of Engineering & Technology Jamshoro URL : Lecture-3 Transistors 1

Lecture Outline Half wave RectifierFull wave RectifierBridge Rectifier

What is a transistor? A transistor is a 3 terminal electronic device made of semiconductor material. Transistors have many uses, including amplification, switching, voltage regulation, and the modulation of signals

Bipolar Transistor A transistor is basically a Si or Ge crystal containing three separate regions.

Architecture of BJTs The bipolar junction transistor (BJT) is constructed with three doped semiconductor regions separated by two pn junctions Regions are called emitter, base and collector

Bipolar Transistor The depletion layers do not have the same width, because different regions have different doping levels.

Biasing If both the junctions are forward biased free electrons enter the emitter and collector of the transistor, joins at the base and come out of the base. If both the junction are reverse biased then small currents flows through both junctions only due to thermally produced minority carriers and surface leakage.

Biasing When the emitter junction is forward biased and collector junction is reverse biased then one expect large emitter current and small collector current but collector current is almost as large as emitter current.

Transistor Current The total current flowing into the transistor must be equal to the total current flowing out of it.

Transistor Applications Switching Amplification Variable Resistor Impedance Matching Voltage Regulation

Basic circuits of BJT

Operation of BJTs BJT will operates in one of following four region – Cutoff region (for digital circuit) – Saturation region (for digital circuit) – Linear (active) region (to be an amplifier) – Breakdown region (always be a disaster)

Operation of BJTs

DC Analysis of BJTs Transistor Currents: I E = I C + I B alpha (  DC ) I C =  DC I E beta (  DC ) I C =  DC I B –  DC typically has a value between 20 and 200

DC Analysis of BJTs DC voltages for the biased transistor: Collector voltage V C = V CC - I C R C Base voltage V B = V E + V BE – for silicon transistors, V BE = 0.7 V – for germanium transistors, V BE = 0.3 V

Q-point The base current, I B, is established by the base bias The point at which the base current curve intersects the dc load line is the quiescent or Q-point for the circuit

Q-point

DC Analysis of BJTs The voltage divider biasing is widely used Input resistance is: R IN   DC R E The base voltage is approximately: V B  V CC R 2 /(R 1 +R 2 )

END OF LECTURE-3 To download this lecture visit 19