Welcome to QMI QMI Paint Sealant Presentation

Teflon ® / PTFE Dynamic Utilized since 1938 –Auto racing –Aircraft –Space travel Numerous applications, including Paint Sealant –Heavy industry

PTFE Chemical Formula (CF 2 CF 2 ) n C = Carbon –backbone of universe F 2 = Fluorine –low surface energy –chemically inert

PTFE Chemical Bonds 1.Carbon to Carbon forms backbone 2.Carbon to Fluorine forms shield Powerful binding forces

PTFE Fluorine Shield Carbon backbone surrounded by sheath of large fluorine atoms Low surface energy –Low coefficient of friction –Non-sticking Powerfully bonded –Fracture resistance –High thermal stability Large fluorine atoms –Other atoms cannot penetrate –Chemically inert

PTFE Moisture / Humidity Hydrophobic –Does not combine with water –Does not dissolve in water Resistant to hydrolysis –Does not decompose, react with water Barrier to water permeation –Stable after year-long water immersion

PTFE Light & Age Stability Transparent to ultraviolet light Resistant to: –Oxidation –Surface fouling –Discoloration –Embrittlement Proven 20-year Florida test

PTFE Long Service Life Retains properties after aging Withstands exposure to: –High temperature 780°F / 415°C –Solvents –Oils –Oxidizing agents –Ultraviolet light –Other environmental agents

Combined Ingredient Benefits Ultimate shine & protection Hard, mirror-like finish Sun shield protects paint against fading Never turns gray or yellow when exposed to sunlight Seals against oxidation, corrosives, salts, dirt and insects Dirt and grime wash off easily Unsurpassed durability

Method of Application Easy to apply –By hand –By orbital buffer Removes road film and detergent build-up –Often eliminates need to use rubbing compounds

Applications –Non-abrasive, safe for clear-coat finishes Fiberglass and formica –Counter tops, sinks, bath tubs, showers, etc. –Automobiles, trucks, marine, aircraft, etc. Approved for enamel, lacquer, metal flake and metallic painted surfaces

Q-LAB Test - QMI & CPC Q-Lab Weathering Research Service –Accelerated weather gloss test 10 painted panels, 75 mm x 152 mm –5 QMI panels, 5 CPC panels –Each panel polished and buffed –Test cycle 8 hours UV light 4 hours condensation (moisture) –Gloss reading every 100 hours 500 hours represent approximately 6 months

QMI / CPC Test Results SpecimenOriginalPresentChangeCombined Change QMI 100 hrs. QMI 200 hrs. QMI 300 hrs. QMI 400 hrs. QMI 500 hrs Total gloss change on 5 plates: - 1 point (gloss increase) Average gloss change per plate: -0.5 point (gloss increase) CPC 100 hrs. CPC 200 hrs. CPC 300 hrs. CPC 400 hrs. CPC 500 hrs Total gloss change on 5 plates: 17 points (gloss decrease) Average gloss change per plate: 3.4 points (gloss decrease) Q-LAB Report No. 1 — 100 Hours

QMI / CPC Test Results SpecimenOriginalPresentChangeCombined Change QMI 200 hrs. QMI 300 hrs. QMI 400 hrs. QMI 500 hrs Total gloss change on 4 plates: 4 points (gloss decrease) Average gloss change per plate: 1 point (gloss decrease) CPC 200 hrs. CPC 300 hrs. CPC 400 hrs. CPC 500 hrs Total gloss change on 4 plates: 16 points (gloss decrease) Average gloss change per plate: 4 points (gloss decrease) Q-LAB Report No. 2 — 200 Hours

QMI / CPC Test Results SpecimenOriginalPresentChangeCombined Change QMI 300 hrs. QMI 400 hrs. QMI 500 hrs Total gloss change on 3 plates: 3 points (gloss decrease) Average gloss change per plate: 1 point (gloss decrease) CPC 300 hrs. CPC 400 hrs. CPC 500 hrs Total gloss change on 3 plates: 12 points (gloss decrease) Average gloss change per plate: 4 points (gloss decrease) Q-LAB Report No. 3 — 300 Hours

QMI / CPC Test Results SpecimenOriginalPresentChangeCombined Change QMI 400 hrs. QMI 500 hrs Total gloss change on 2 plates: 1 point (gloss decrease) Average gloss change per plate: 0.5 point (gloss decrease) CPC 400 hrs. CPC 500 hrs Total gloss change on 2 plates: 11 points (gloss decrease) Average gloss change per plate: 5.5 points (gloss decrease) Q-LAB Report No. 4 — 400 Hours

QMI / CPC Test Results SpecimenOriginalPresentChangeCombined Change QMI 500 hrs.84822Total gloss change on 1 plate: 2 points (gloss decrease) CPC 500 hrs.88835Total gloss change on 1 plate: 5 points (gloss decrease) Q-LAB Report No. 5 — 500 Hours

Average Gloss Decrease

Total Gloss Decrease Hours

QMI Paint Sealant The perfect solution for today’s polishing needs Thank you!

It’s time...