5.8 Exclusive-OR Gates and Parity Circuits ReturnNext Exclusive-OR(XOR) Gates Exclusive-NOR(XNOR) Gates x ⊕ y=x · y+x · y x ⊙ y=x · y+x · y 0 1 1 0 0 1.

Slides:

Advertisements

Similar presentations

Charles Kime & Thomas Kaminski © 2004 Pearson Education, Inc. Terms of Use (Hyperlinks are active in View Show mode) Terms of Use Chapter 2 – Combinational.

Advertisements

Other Gate Types COE 202 Digital Logic Design Dr. Aiman El-Maleh

topics Logic gates Gates types Universal gates

5.5 Encoders A encoder is a multiple-input, multiple-output logic circuit that converts coded inputs into coded outputs, where the input and output codes.

5.4 Decoders A decoder is a multiple-input, multiple-output logic circuit that converts coded inputs into coded outputs, where the input and output codes.

Limitations are  The number of inputs (n)  The number of outputs (m)  The number of product terms (p) 5.3 Combinational PLDs ReturnNext Programmable.

ECE 3110: Introduction to Digital Systems Chapter 6 Combinational Logic Design Practices XOR, Parity Circuits, Comparators.

ReturnNext A circuit that compares two binary words and indicates whether they are equal is called a comparator. Some comparators interpret their input.

Overview Part 3 – Additional Gates and Circuits 2-8 Other Gate Types

Exclusive-OR and Exclusive-NOR Gates

Combinational Logic and Verilog. XORs and XNORs XOR.

Module 8.  In Module 3, we have learned about Exclusive OR (XOR) gate.  Boolean Expression AB’ + A’B = Y also A  B = Y  Logic Gate  Truth table ABY.

EET 1131 Unit 6 Exclusive-OR and Exclusive-NOR Gates  Read Kleitz, Chapter 6.  Do Unit 6 e-Lesson.  Homework #6 and Lab #6 due next week.  Quiz next.

Parity. 2 Datasheets TTL:  CMOS: 

Gate-Level Minimization. Digital Circuits The Map Method The complexity of the digital logic gates the complexity of the algebraic expression.

CS 151 Digital Systems Design Lecture 11 NAND and XOR Implementations.

ENGIN112 L11: NAND and XOR Implementation September 26, 2003 ENGIN 112 Intro to Electrical and Computer Engineering Lecture 11 NAND and XOR Implementations.

Basic Digital Design Discussion D2.3. Basic Digital Design Sum of Products Design –Minterms Product of Sums Design –Maxterms.

 We can use an algebraic description of the circuit ’ s functional behavior in the analysis of a larger system that includes the circuit.  We can determine.

3.1 Logic Signals and Gates Logic Signals ReturnNext  Logic Value: Many physical quantities can be represented two possible numbers or logic values —

3. Flip-flops ReturnNext 8.1 Sequential-Circuit Documentation Standards As a whole, basic documentation standards include signal naming, logic symbols,

Multiplexers DeMultiplexers XOR gates

Lab 04 :Serial Data Control Systems : Slide 2 Slide 3 Slide 4 NOR Gate: NAND Gate: NOR / NAND Alternate Symbols: Slide 5 XOR and XNOR Gate: Serial Data.

Additional Gates BIL- 223 Logic Circuit Design Ege University Department of Computer Engineering.

Module 3.  Binary logic consists of :  logic variables  designated by alphabet letters, e.g. A, B, C… x, y, z, etc.  have ONLY 2 possible values:

XOR and XNOR Logic Gates. XOR Function Output Y is TRUE if input A OR input B are TRUE Exclusively, else it is FALSE. Logic Symbol  Description  Truth.

NOCTI Review Lesson 4 Objectives:

Transistors and Logic Circuits. Transistor control voltage in voltage out control high allows current to flow -- switch is closed (on) control low stops.

Documentation Standards Circuit specification. –Description of what the system is supposed to do, including a description of all inputs and outputs and.

CS 151: Introduction to Digital Design Chapter 2-9 Exclusive-OR Gates.

Digital Logic Design Week 3

EE2420 – Digital Logic Summer II 2013 Hassan Salamy Ingram School of Engineering Texas State University Set 4: Other Gates.

Multiplexers XOR gates. Multiplexers A multiplexer is a digital switch - it connects data from one of n sources to its output. An n-input and b-bit multiplexer.

1 EE121 John Wakerly Lecture #6 Three-state Outputs Encoders Multiplexers XOR gates.

Logic Gates Shashidhara H S Dept. of ISE MSRIT. Basic Logic Design and Boolean Algebra GATES = basic digital building blocks which correspond to and perform.

Chapter 33 Basic Logic Gates. 2 Objectives –After completing this chapter, the student should be able to: Identify and explain the function of the basic.

Sneha.  Gates Gates  Characteristics of gates Characteristics of gates  Basic Gates Basic Gates  AND Gate AND Gate  OR gate OR gate  NOT gate NOT.

Exclusive OR Gate. Logically, the exclusive OR (XOR) operation can be seen as either of the following operations:exclusive OR (XOR) 1. A AND NOT B OR.

LOGIC CIRCUIT IMPLEMENTATION

Basic logic gates  AND gate:The truth table is given by A.BBA

Chapter 3 Gate-level Minimization. 3-7 NAND and NOR Implementation Digital circuits are frequently constructed with NAND or NOR gates rather than with.

COE 202: Digital Logic Design Combinational Logic Part 4

CS 1110 Digital Logic Design

Logic Gates. The Inverter The inverter (NOT circuit) performs the operation called inversion or complementation. Standard logic symbols: 1 1 input output.

CS 121 Digital Logic Design Gate-Level Minimization Chapter 3.

Ahmad Almulhem, KFUPM 2010 COE 202: Digital Logic Design Combinational Logic Part 4 Dr. Ahmad Almulhem ahmadsm AT kfupm Phone: Office:

Digital Electronics Chapter 3 Gate-Level Minimization.

Chapter-3: BOOLEAN ALGEBRA & LOGIC GATES Analysis and logical design.

ECE 171 Digital Circuits Chapter 10 MUX Herbert G. Mayer, PSU Status 11/23/2015 Copied with Permission from prof. Mark PSU ECE.

CS151 Introduction to Digital Design Chapter 2: Combinational Logic Circuits 2-9 Exclusive-OR Operator and Gates 1Created by: Ms.Amany AlSaleh.

Combinational Logic Design. 2 Combinational Circuits A combinational logic circuit has: ♦ A set of m Boolean inputs, ♦ A set of n Boolean outputs ♦ n.

Combinational Logic: Other Gate Types

ECE 2110: Introduction to Digital Systems Chapter 6 Combinational Logic Design Practices XOR and parity check Circuits.

Logic Gates Chapter 5 Subject: Digital System Year: 2009.

2.4 Gray Code ReturnNext In a Gray code only one bit changes between each pair of successive code words. Gray code is a reflected code. It can be defined.

Chapter 33 Basic Logic Gates. Objectives After completing this chapter, you will be able to: –Identify and explain the function of the basic logic gates.

Combinational Logic Design

Combinational Logic Design. 2 Combinational Circuits A combinational logic circuit has: ♦ A set of m Boolean inputs, ♦ A set of n Boolean outputs ♦ n.

4–1 Gates Let’s examine the processing of the following six types of gates NOT AND OR XOR NAND NOR Typically, logic diagrams are black and white, and the.

Lecture 11 Topics Additional Design Techniques Distributed Connections

Transistors and Logic Circuits

2-6 Exclusive-OR Operator and Gates

Exclusive OR Gate.

SCO I: Algebra Logică 2 Combinational Logic Circuits

King Fahd University of Petroleum and Minerals

Overview Part 3 – Additional Gates and Circuits

13 Digital Logic Circuits.

Overview Part 3 – Additional Gates and Circuits 2-8 Other Gate Types

XOR Function Logic Symbol  Description  Truth Table 

Presentation transcript:

5.8 Exclusive-OR Gates and Parity Circuits ReturnNext Exclusive-OR(XOR) Gates Exclusive-NOR(XNOR) Gates x ⊕ y=x · y+x · y x ⊙ y=x · y+x · y X Y Inputs x⊕yx⊕y x⊙yx⊙y Outputs

 Equivalent symbols for XOR and XNOR gates NextBackReturn 5.8 Exclusive-OR Gates and Parity Circuits (a) XOR gates (b) XNOR gates Prove the upper symbols for XOR and XNOR is equivalent.

 Parity Circuits (p413 Figure 5-74) NextBackReturn 5.8 Exclusive-OR Gates and Parity Circuits  The 74x280 9-Bit Parity Generator (p414 Figure 5-75) A B C D EVEN E F ODD G H I 74X

BackReturn 5.8 Exclusive-OR Gates and Parity Circuits  Parity-Checking Applications (p415 Figure 5-76)  Parity Circuits are also used with error- correcting codes (p416 Figure 5-77)