Joints and Shear Fractures

Slides:



Advertisements
Similar presentations
The sandwich effect Lecture 6.
Advertisements

Stress and Deformation: Part II (D&R, ; ) 1. Anderson's Theory of Faulting 2. Rheology (mechanical behavior of rocks) - Elastic: Hooke's.
Structural Geology Ch. 5 – Rheology
Chapter 3 Mechanical Properties of Materials
Mohr Circle for stress In 2D space (e.g., on the s1s2 , s1s3, or s2s3 plane), the normal stress (sn) and the shear stress (ss), could be given by equations.
Stress and Deformation: Part I (D&R, ; ) The goal for today is to explore the stress conditions under which rocks fail (e.g., fracture),
Distribution of Microcracks in Rocks Uniform As in igneous rocks where microcrack density is not related to local structures but rather to a pervasive.
3 Torsion.
3 Torsion.
More on Mohr (and other related stuff) Pages , ,
Lecture 7 Mechanical Properties of Rocks §Rock properties: mass density, porosity, and permeability §Stress §Mohr's circle §Strain §Elasticity of rocks.
3 Torsion.
Chapter 3 Rock Mechanics Stress
Complex Static Stresses and Torsion
Geology 3120 Powerpoint notes available online at:
Announcements This week's lab: 1-3 PM with Andrew McCarthy. Please come prepared with specific questions. There will be no lecture this Wednesday! Please.
Mechanics of Materials II
Announcements Next week lab: 1-3 PM Mon. and Tues. with Andrew McCarthy. Please start on lab before class and come prepared with specific questions Cottonwood.
Announcements Midterm next Monday! Midterm review during lab this week Extra credit opportunities: (1) This Thurs. 4 pm, Rm. Haury Bldg. Rm 216, "The role.
THEORIES OF FAILURE THEORIES OF FAILURE FOR DUCTILE MATERIALS
3 Torsion.
The Mechanics of the crust
Mechanics of Materials(ME-294)
Thermal Strains and Element of the Theory of Plasticity
Principal Stresses and Strain and Theories of Failure
Elasticity and Strength of Materials
Chapter 9 Static Equilibrium; Elasticity and Fracture
FYI: All three types of stress are measured in newtons / meter2 but all have different effects on solids. Materials Solids are often placed under stress.
George F. Limbrunner and Leonard Spiegel Applied Statics and Strength of Materials, 5e Copyright ©2009 by Pearson Higher Education, Inc. Upper Saddle River,
Mechanical Properties
Rheology Relations between stress and strain. Not easy to define Rheology: describes the ability of stressed materials to deform. strain rate creep regimes.
Class #1.2 Civil Engineering Materials – CIVE 2110
9 Torsion.
Transformations of Stress and Strain
APPLICATIONS/ MOHR’S CIRCLE
1 ME383 Modern Manufacturing Practices Lecture Note #3 Stress-Strain & Yield Criteria Dr. Y.B. Guo Mechanical Engineering The University of Alabama.
If A and B are on the same side of the origin (i. e
Lecture 7 Mechanical Properties of Rocks
3 Torsion.
Introduction Stress: When some external system of forces act on a body, the internal forces are set up at various sections of the body, which resist the.
3 Torsion.
Yield point and yield stress or strength,  y Offset method finds this yield stress by assuming a 0.2 % strain (.002).002 Big yielding region, large elongation.
Mechanical Properties of Materials
Course No.: MEBF ZC342 MACHINE DESIGN
Geology Failure Models
Today: Back to stress stress in the earth Strain Measuring Strain Strain Examples Today: Back to stress stress in the earth Strain Measuring Strain Strain.
MAE 322 Machine Design Lecture 2
Failure I. Measuring the Strength of Rocks A cored, fresh cylinder of rock (with no surface irregularities) is axially compressed in a triaxial rig.
MECHANICS OF MATERIALS Fourth Edition Ferdinand P. Beer E. Russell Johnston, Jr. John T. DeWolf Lecture Notes: J. Walt Oler Texas Tech University CHAPTER.
1 Structural Geology Force and Stress - Mohr Diagrams, Mean and Deviatoric Stress, and the Stress Tensor Lecture 6 – Spring 2016.
Mohr-Coulomb failure Goal: To understand relationship between stress, brittle failure, and frictional faulting and to use this relationship to predict.
Materials Science Chapter 8 Deformation and Fracture.
Lab #3: Strat Columns: Draw to scale Lab #3: Strat Columns: Draw to scale Includes: (left to right) Age (era and period) Name of unit Thickness of unit.
Failure and Failure Theories:
7. Yield Criteria of Metals
If A and B are on the same side of the origin (i. e
Theories of Failure Failure of a member is defined as one of two conditions. 1. Fracture of the material of which the member is made. This type of failure.
3 Torsion.
Poisons Ratio Poisons ratio = . w0 w Usually poisons ratio ranges from
3 Torsion.
Theories of Failure Failure of a member is defined as one of two conditions. 1. Fracture of the material of which the member is made. This type of failure.
Experiment # 2 Torsion Test
3 Torsion.
Physical Properties of Rocks
Strain Transformation
The Traction Vector and Stress Tensor
Simple Stresses & Strain
Copyright ©2014 Pearson Education, All Rights Reserved
Yielding And Fracture Under Combine Stresses
Presentation transcript:

Joints and Shear Fractures (continued) We use a Mohr stress diagram to map the failure, by plotting both normal and shear stresses, as well as the greatest and least stresses on the Mohr circle. After we test a numerous rocks at different confining pressures, we get a family of failure values that define a failure envelope.

Creation of Joints & Shear Fractures in the Lab There are 2 basic types of rock strength tests: Tensile strength tests: specimen is pulled along its axis (s3) with or without confining pressure is applied to it’s sides (s1 = s2) until failure, and; Compressive strength tests: specimen is compressed along its axis (s1) with or without confining pressure is applied to it’s sides (s2 = s3) until failure. At failure, the values of the principal stresses are noted and so is the orientation of the plane of failure wrt either s1 or s3. These data are plotted in Mohr space.

A single experiment will produce a single data point that describes the normal and shear stress (sn, ss) for the plane of failure at the instant of failure. A number of similar experiments are carried out at different confining pressures to create a series of similar data points. The location of these points defines a failure envelope. The envelope separates a region of Mohr space where rock is stable - in no danger of failure - from a region outside the envelope, where intact rock cannot exist.

Rx failure (fracture) at a specified s3 and s1). Each bam along the failure envelope represents rock failure (e.g., fracture) at different differential stress. So each Mohr circle towards the right of the Mohr plot is a larger circle. Rx failure (fracture) at a specified s3 and s1).

Tensile Strength Tests Rocks are typically very weak in tension. Rocks are typically 2 to 30 times stronger in compression than in tension. Remember: in structural geology, tensile stresses are negative (-) and compressive stresses are positive (+). We can visualize tensile failure in Mohr space, and get an idea of what a tensile failure law might look like.

Tensile Strength Tests First, compared with compressive tests, rocks are very weak in tension. The ratios of strength in tension in unconfined compression is about 2:1, by may exceed 30:1. Break a Popsicle stick. As we bend it, tension in the outer arc of the bend and compression in the inner arc. Weaker in tension, the stick snaps (fails) along the outer arc. The state of stress just before the experiment is s1 = s2 = s3 = 0. This is represented by a single point, where there is not differential stress. As tensile stresses build parallel to the length of the sample, differential stress builds.

A beginning of experiment, no differential stress (e. g A beginning of experiment, no differential stress (e.g., hydrostatic state of stress). Tensile failure simply occurs when the tensile strength of the rock is exceeded, and the plane of failure is perpendicular to the tensile stress (s3). Increasing tensional stresses, with increases of circle diameter

Tensile stresses builds up parallel to length of sample Tensile stresses builds up parallel to length of sample. As differential stress increases, the diameter of the Mohr circle increases. Stress perpendicular to the axis of the rock core is the default direction of s1. During the test, since tensile stress is negative, it’s the least principal stress (s3). When tensile strength of the rock is exceeded, the rock breaks perpendicular to the direction of tension (e.g., s3). A mode I fracture forms.

s3 = To Tensile Strength Law: A rock will fail by mode I fracturing if the magnitude of least principal stress (s3) equals or exceeds the tensile strength of the rock. The mode I fracture is parallel to s1 and perpendicular to s3. In Mohr space, the radius that connects the center of the differential stress circle with the point of failure lies along the x-axis.

Tensile & Compressive Strength Tests We can also run triaxial tests (with a small amount of compressive confining pressure applied to the flanks of the specimen while at the same time applying a tensile stress along the axis. Lets explore the relations between differential stress, confining pressure, and fracture strength of a rock in compression. 10 MPa

If we begin the experiment at confining pressure of 10 MPa If we begin the experiment at confining pressure of 10 MPa. Then we increase the tensile stresses parallel to the length of the specimen. When tensile strength of the rock is exceeded, the rock breaks perpendicular to the direction of tension (e.g., s3). A mode I fracture forms. 10 MPa Here, increasing levels is represented by points (s1) moving to the left of the origin along the normal stress axis. Ultimately, the differential stress is sufficient to break the rock.

As the test goes on, the differential stress (s1 - s3) increases (the diameter of the Mohr circle) until failure occurs.

Conguate fractures form under transitional tensile behavior. We begin the experiment at confining pressure of 40 MPa. If the confining pressures are in the range of s1 = 3 to 5To (from 3 to 5 times the tensile strength of the sandstone), the failure envelope flatten slightly as passes the shear stress axis and is parabolic (dark line). Conguate fractures form under transitional tensile behavior.

Failure under compressive stress At increasing confining pressure (s3), we need increased differential stress (s1-s3). The increase of differential stress is shown by an change in the Mohr circle diameter.

Coulomb's Law of Failure: Dynamic and mechanical models developed by Coulomb (1773) and Mohr (1900). The law describes the height and slope of a linear envelope of failure for rocks in compression. Where sc = so + sNtanf f = angle of internal friction tanf = coefficient of internal friction sc = critical shear stress required for faulting so = cohesive strength sN = normal stress

Relationship between stress and fracturing These tests define a failure envelope for a particular rock. All of the normal and shearing stresses inside the envelop are stable – no fractures produced. All of the stresses on or outside the envelope will producing fracturing

Relationship between stress and fracturing When the Mohr circle becomes tangent to the envelope, then the sc at that point causes a fracture. No fractures are produced by any other combination of sc on the circle.

Coulomb's Law of Failure: The slope and straightness of the envelope reveal that compressive strength of a rock increases linearly with increasing confining pressure. The actual angle of slope is called, the angle of internal friction (f). The envelope is called the Coulomb envelope. A law that describes the conditions under which a rock will fail by shear fracturing under compressive stress conditions.

The point of failure on the Coulomb envelope reveal magnitudes of sN = 43 and ss = 47. In terms of Coulomb Law of failure, the shear stress value of 47 MPa is the critical shear stress (sc) necessary for fracturing to occur. Part of its magnitude is cohesive strength (s0) expressing in units of stress, read directly off of the Mohr y-intercept of the envelope of failure.

The rest of critical shear stress (sc) is the stress required to overcome internal frictional resistance to triggering movement on the fracture. This component is labeled: sN tanf or the coefficient of internal friction. This value is expressed in terms of the normal stresses acting on the fault plane and the angle of internal friction, which is the slope of the failure envelope

The cohesive strength (s0) is a small part of critical shear stress required for shear fracture. Most shear fractures form when shear stresses on a plane of failure reach a level slightly over 50% of the normal shear stresses acting on the plane.

Note change in slope What happens with higher confining pressures At very high confining pressures, Coulomb theory is not valid. With increasing confining pressure, rocks behave in a less brittle fashion. This is apparent in our stress/strain curves, where at higher confining pressures there is a departure from the linear relations between stress and strain. Analogous to stress/strain, the linear Coulomb relations between fracture strength and confining pressure breaks down at higher confining pressures – the rock becomes weaker. The straight-line envelope becomes a concave downwards envelope of lesser slope. Note change in slope The von Mises criterion describes deformational behavior above the brittle-ductile transition. When the critical yield stress is surpassed, the rock will fail by ductile shear along planes of maximum shear stress, oriented at 45° to the greatest principal stress.

Measured values of tensile strength, cohesive strength, and internal friction for a few rock types.

Rock failure envelope for a rock marked by low tensile strength, low cohesive strength, and low internal angle of friction.

Rock failure envelope for a rock marked by high tensile strength, high cohesive strength, and high internal angle of friction.