Bethanie J. H. Stadler AIMD Group Outline Motivation (isolators) Garnet Layer –Fabrication –Characterization Buffer Layers Permanent Magnets Photonic Crystals.

Slides:

Advertisements

Similar presentations

(and briefly, Electrodeposition)

Advertisements

1/11 Activitats en Nanotecnologies Grup de Dispositius, Sensors i Disseny VLSI Eduard Llobet Lluís F. Marsal.

Identification of Defects and Secondary Phases in Reactively Sputtered Cu 2 ZnSnS 4 Thin Films Vardaan Chawla, Stacey Bent, Bruce Clemens April 7 th, 2010.

Anodic Aluminum Oxide.

Three-dimensional TiO 2 nanotube arrays for photo-device application  We can controlled the hole size by change the temperature, applied voltage and concentration.

Mikhail Rybin Euler School March-April 2004 Saint Petersburg State University, Ioffe Physico-Technical Institute Photonic Band Gap Structures.

starting substrates were undoped 5  m thick GaN films grown by hydride vapor phase epitaxy (HVPE) on c-plane sapphire. 60 nm thick SiOx film was then.

Fabrication of large area sub-wavelength structures for anti-reflection optical film Reporter ﹕ Wen-Yu Lee Advisor ： Cheng-Hsin Chuang Department of Mechanical.

Compact Power Supplies Based on Heterojunction Switching in Wide Band Gap Semiconductors NC STATE UNIVERSITY UCSB Effects of surface oxide on wafer bonding.

Tin Based Absorbers for Infrared Detection, Part 2 Presented By: Justin Markunas Direct energy gap group IV semiconductor alloys and quantum dot arrays.

MANSE Midterm Review Organic Spintronics Current team members Franklyn Burke (graduate student, 2007-) Huesyin Tokuc (graduate student, 2008-) Prof. Greg.

June 13, 2015Sean Glass 2003 Two and three- dimensional nanoscale structures for molecular electronics Controlled self assembly of charged-stabilized gold.

Photonic Bandgap Structures By Akshay V. Hegde Graduate Student Dept. of Electrical Engineering Course: Optical Communications Instructor: Dr. Pao-Lo Liu.

Magneto-Optic Materials for Integrated Photonics Bethanie J. H. Stadler Sang-Yeob Sung, Luis Cruz, Na hyoung Kim, Xiaoyuan Qi, Ryan Cobian, Neal Speetzen.

Dr. Mansour Al Hoshan TiO 2 Nanotubes Arrays fabricated by anodizing process.

ELECTRICAL POROUS SILICON MICROARRAY FOR DNA HYBRIDIZATION DETECTION M. Archer*, D. Persaud**, K. D Hirschman**, M. Christophersen* and P. M Fauchet* *Center.

Agilent Technologies Optical Interconnects & Networks Department Photonic Crystals in Optical Communications Mihail M. Sigalas Agilent Laboratories, Palo.

Woodpile Structure Fabrication Chris McGuinness July 8, 2009 Workshop on Novel Concepts for Linear Accelerators and Colliders Working Group 2: Dielectric.

Catalysis and Catalysts - X-Ray Diffraction (XRD) X-Ray Diffraction Principle: interference of photons by reflection by ordered structures n = 2d sin 

Mg 2 NiH 4 thin films synthesis results. Main goals: hydrogenation of Mg 2 Ni thin films in high hydrogen pressure and temperature (p,T); analysis of.

XRD Investigations of Co Films Deposited by CVD 20 th International Conference for Students and Young Scientists «Modern Technique and Technologies MTT.

Structural and optical properties of pulsed laser deposited V 2 O 5 thin f ilms Apr 20 th, 2009 Thin film class Paper reading session Presentation by Jiajia.

Etching and Cleaning Cleaning remove contaminated layers Etching remove defect layers, form pattern by selective material removal Wet etching: using reactive.

Film Deposition in IC Fabrication

Aluminum Induced Crystallization using an Electron Beam By: Benjamin Newton University of Arkansas Microelectronics and Photonics Program George Washington.

OU NanoLab/NSF NUE/Bumm & Johnson Nano-Scale Structures Fabricated using Anodic Aluminum Oxide Templates Outline IIntroduction and Motivation IIPorous.

McGill Nanotools Microfabrication Processes

Zn x Cd 1-x S thin films were characterized to obtain high quality films deposited by RF magnetron sputtering system. This is the first time report of.

Overview of course Capabilities of photonic crystals Applications MW 3:10 - 4:25 PMFeatheringill 300 Professor Sharon Weiss.

Section I: Motivation and introduction The technological foundations of most high-tech industries are based primarily on the development/creation and utilization.

Daniel Wamwangi School of Physics

Li-Mn-O Thin Film Cathode prepared at Room Temperature Thin Film & Battery Materials Lab. National Research Lab. Kangwon Nat’l Univ. Jeong-Kyu Lim a, Hyeon-Young.

Corresponding author: Special thanks to Dr. I. Vavra for TEM analyses Influence of spatial sputterig.

Quasi Symmetric Moderate Refractive Index Photonic Crystal Waveguides on Mesoporous Substrates Markus Schmidt, Gunnar Böttger, Christian Liguda, Dion Klunder.

Fabrication of Grid Mask and Test  Requirements of fiducial mark  Fabrication of sample mask  Test by beam exposure (X-ray & UV)  Summary S. H. Kim.

Xiang Zhang ’s Group Department of Mechanical and Aerospace Engineering University of California at Los Angeles California Nano System Institute (CNSI)

Photonic Band-gap Masks to Enhance Resolution and Depth of Focus

VCI2010 Photonic Crystals: A Novel Approach to Enhance the Light Output of Scintillation Based Detectors 11/19/2015 Arno KNAPITSCH a, Etiennette AUFFRAY.

ZnCo 2 O 4 : A transparent, p-type, ferromagnetic semiconductor relevant to spintronics and wide bandgap electronics Norton Group Meeting 4/1/08 Joe Cianfrone.

Motivation There has been increasing interest in the fabrication and characterization of 1D magnetic nanostructures because of their potential applications.

Master Colloquium Field-effect Control of Insulator-metal Transition Property in Strongly Correlated (La,Pr,Ca)MnO 3 Film Ion Liquid (IL) LPCMO channel.

Atomic Layer Deposition for Microchannel Plates Jeffrey Elam Argonne National Laboratory September 24, 2009.

Develop (K 0.5 Na 0.5 )NbO 3 Lead-Free Ferroelectric Thin Films by the RF Sputtering Technique Hsiu-Hsien Su.

2. Design Determine grating coupler period from theory: Determine grating coupler period from theory: Determine photonic crystal lattice type and dimensions.

M.S. Hossain, N.A. Khan, M. Akhtaruzzaman, A. R. M. Alamoud and N. Amin Solar Energy Research Institute (SERI) Universiti Kebangsaan Malaysia (UKM) Selangor,

Atomic Layer Deposition for Microchannel Plate Fabrication at Argonne

Fowler-Nordheim Tunneling in TiO2 for room temperature operation of the Vertical Metal Insulator Semiconductor Tunneling Transistor (VMISTT) Lit Ho Chong,Kanad.

Molecular and Electronic Devices Based on Novel One-Dimensional Nanopore Arrays NSF NIRT Grant# PIs: Zhi Chen 1, Bruce J. Hinds 1, Vijay Singh.

National Cheng Kung University Institute of microelectronics OEIC Lab. Jun P. 1 ZnO-based thin film double heterostructured- ultraviolet light-emitting.

Effect of sputter-particle flux variations on properties of ZnO:Al thin films S. Flickyngerova 1, M. Netrvalova 2,L. Prusakova 2, I. Novotny 1, P.Sutta.

ALD for Conformal and High Aspect Ratio Coverage Bryan (Insun) Park Mentor: J Provine 01/12/2011 EE412.

Epitaxial films of tetragonal Mn 3 Ga: magnetism and microstructure F. Casoli 1,*, J. Karel 2, P. Lupo 3, L. Nasi 1, S. Fabbrici 1,4, L. Righi 1,5, F.

Deposition Process To grow WS 2 films, a reactive sputtering process is implemented. In reactive sputtering, Argon atoms are ionized causing them to accelerate.

Why MOCVD and GaAs nanowires?

Scientific idea and experimental setup

Design and Fabrication of Alumina/Silica Optical Bandpass Filter

Luminescent Periodic Microstructures for Medical Applications

Introduction Thin films of hydrogenated amorphous silicon (a-Si:H) are used widely in electronic, opto-electronic and photovoltaic devices such as thin.

Effect of Heat Treatment on Properties of Sputtered Co100-xCux Film

Supported by Wang Dao Project (UROP)

CNR-Istituto del Sistemi Complessi, Roma

Fabrication of Nano-porous Templates Using Molecular Self-Assembly of Block Copolymers for the Synthesis of Nanostructures Luke Soule, Jason Tresback Center.

Centro de Investigación y de Estudios Avanzados del Institúto Politécnico Nacional (Cinvestav IPN) Palladium Nanoparticles Formation in Si Substrates from.

Woodpile Structure Fabrication for Laser Acceleration at E163

19th Coherent Laser Radar Conference

Nanostructured engineered materials with high magneto-optic performance for integrated photonics applications Mikhail Vasiliev1, Kamal Alameh1, Viatcheslav.

Nano-engineered high-performance magneto-optic garnet materials

FORTH 3D Modelling Issues addressed:

Presentation transcript:

Bethanie J. H. Stadler AIMD Group Outline Motivation (isolators) Garnet Layer –Fabrication –Characterization Buffer Layers Permanent Magnets Photonic Crystals

Bethanie J. H. Stadler AIMD Group SmCo : RF Sputtering n Demagnetized SmCo bar magnet on 8” Cu disk target n Use confining ring n Fused quartz substrates Ar SiO 2 substrate SmCo Target Confining ring RF Sputter System

Bethanie J. H. Stadler AIMD Group XRD of Permanent Magnet Film Majority phase is Sm 2 Co 17

Bethanie J. H. Stadler AIMD Group VSM of Permanent Magnet Film Ms: 1177emu/cm 3 Mr: 1024emu/cm 3 Hc: 465Oe Sm 2 Co 17 SmCo 5

Bethanie J. H. Stadler AIMD Group Outline Motivation (isolators) Garnet Layer –Fabrication –Characterization Buffer Layers Permanent Magnets Photonic Crystals

Bethanie J. H. Stadler AIMD Group Magneto Photonic Crystal Hexagonal Photonic Crystal Array TE Band Gap Point DefectLine Defect

Bethanie J. H. Stadler AIMD Group Photonic Crystal Design 1.31  m Band Gap Rod: YIG Background: Air Hole: Air Background: YIG

Bethanie J. H. Stadler AIMD Group Beam Propagation (FDTD) Simulation of Photonic Crystals Rod: YIG Background: Air Hole: Air Background: YIG

Bethanie J. H. Stadler AIMD Group Nanopore Fabrication Al Pt Electrolyte Stirrer Temperature Bath Aluminum Anodized Aluminum Oxide Self Assembled Nanopores Self Assembled Nanopores in Aluminum Oxide

Bethanie J. H. Stadler AIMD Group Nanopore dimension control a=30nm, r=10nm a=100nm, r= 30nm

Bethanie J. H. Stadler AIMD Group Bandgap Simulation Bandgap for current pore dimensions corresponds to UV.

Bethanie J. H. Stadler AIMD Group Photonic Crystal on YIG Nanopore Mask YIG Air Holes, YIG Background YIG Rods, Air Background

Bethanie J. H. Stadler AIMD Group Conclusions Magneto-optics are important to integrated photonics. n YIG: secondary phases & temperature limiting. n MgO buffer layers and SiO 2 claddings successful. n SmCo permanent magnets are well developed. n Photonic Crystals structures simulated and fabrication is begun.