File: 1 6/2/2015/KH POU’s & tasks –Each POU must be associated to Task –Function Block can include more Function Blocks inside NC1131-3

File: 2 6/2/2015/KH Online debugger –RED: TRUE –BLUE: FALSE –GREEN: values –BLACK: constant NC1131-3

File: 3 6/2/2015/KH NCDef Link between variables and keypad layout

File: 4 6/2/2015/KH Uses *.MDB -file (Access Database) –parameter definitions –monitoring value definitions –text -definitions –keypad layout NCDef

File: 5 6/2/2015/KH KEYPAD LAYOUT VARIABLE GROUPS PARAMETER DEFINITIONS NCDef

File: 6 6/2/2015/KH TEXT: SELECTED FROM A LIST OR FREE TEXT LIMITS DISPLAY FORMAT SPECIAL TASK, IF NEEDED INDIVIDUAL ID NUMBER PARAMETER CLASS, E.G. APPLICATION, MOTOR,... NCDef

File: 7 6/2/2015/KH To set parameters To save, load and compare parameter sets Graphical monitoring with trigger settings –max samples –sampling interval 50ms - 1.2s, NCDrive

File: 8 6/2/2015/KH NCDrive

File: 9 6/2/2015/KH NCDrive

File: 10 6/2/2015/KH NCLoad NCLoad is tool to download –Applications –System program –Option card program

File: 11 6/2/2015/KH 1 vcn -file includes: –1 or more application(s) –system software and application(s) OR –expander board software NCLoad

File: 12 6/2/2015/KH Is used to watch and edit application variables and firmware interface variables NCDebug

File: 13 6/2/2015/KH Application Naming on NX Example: Lift Application is ASFIFF08 or with revision ASFIFF08V109

File: 14 6/2/2015/KH NX product - Application ID AS FI FF08 V101 Name has four sections –AS = device type AL,AS,AP … (NXL, NXS, NXP) NXS application will work also in NXP –FI = application development center (country) –FF08 application identifier –V101 application revision (V1.01)

File: 15 6/2/2015/KH The new tool is available for everyone who has a need to make special applications For more information ask you area manager or from application team Training for NC Tool