AE 1350 Lecture Notes #8. We have looked at.. Airfoil Nomenclature Lift and Drag forces Lift, Drag and Pressure Coefficients The Three Sources of Drag:

Slides:

Advertisements

Similar presentations

Aerodynamic Characteristics of Airfoils and wings

Advertisements

Aircraft Control Devices

Aircraft Stability and Control AE 1350 Lecture Notes #11

Retreating Blade Stall

Lift Coefficient & Lift Quantity Momentum, Flaps, Slots, Slats,& Spoilers Lecture 5 Chapter 2.

Lesson 17 High Lift Devices

Aerodynamics Getting to the Point

MAE 3241: AERODYNAMICS AND FLIGHT MECHANICS

Aircraft Motion and Control

The Stall, Airfoil development, &Wing Lift and Span Effects

ME 480 Introduction To Aerospace: Chapter 2 Prof. Doug Cairns.

MAE 1202: AEROSPACE PRACTICUM Lecture 12: Swept Wings and Course Recap April 22, 2013 Mechanical and Aerospace Engineering Department Florida Institute.

U5AEA15 AIRCRAFT STRUCTURES-II PREPARED BY Mr.S.Karthikeyan DEPARTMENT OF AERONAUTICALENGINEERING ASSISTANT PROFESSOR.

Theory of Flight 6.05 Lift and Drag References:

ME403 Chapter 3 Wing Aerodynamics

Aero Engineering 315 Lesson 21 GR#2 Review. GR Breakdown  150 points total  25 multiple choice/matching Mostly conceptual 3 short work outs  2 long.

Review Chapter 12. Fundamental Flight Maneuvers Straight and Level Turns Climbs Descents.

Sep 2012 Lesson 2.2 Theory of Flight Wing Design.

Basic Aerodynamic Theory and Drag

MAE 1202: AEROSPACE PRACTICUM

AE 1350 Lecture Notes #7 We have looked at.. Continuity Momentum Equation Bernoulli’s Equation Applications of Bernoulli’s Equation –Pitot’s Tube –Venturi.

Utilizing your notes and past knowledge answer the following questions: 1) What is thrust and how can it be generated? 2) What occurs when the resultant.

Lesson 2-2a Principles of Flight

Aerodynamic Forces Lift and Drag Aerospace Engineering

MAE 1202: AEROSPACE PRACTICUM

Lecture 3: Basic Aircraft

Pharos University ME 253 Fluid Mechanics II

-DRAG n n Energy is neither created or destroyed…visited earlier in the semester. n n How does a car as an energy system lose energy? n n FRICTION:

MAE 1202: AEROSPACE PRACTICUM Lecture 11: Finite Wings April 15, 2013 Mechanical and Aerospace Engineering Department Florida Institute of Technology D.

Bronze C Theory The Principles of Flight. Terms Wing Section Chord line Mean Camber line Airflow Relative Airflow Boundary layer Stagnation point Angle.

Aero Engineering 315 Lesson 20 Supersonic Flow Part II.

P M V Subbarao Professor Mechanical Engineering Department I I T Delhi

Introduction to Fluid Mechanics

MAE 1202: AEROSPACE PRACTICUM Lecture 8: Airfoils and Introduction to Finite Wings March 25, 2013 Mechanical and Aerospace Engineering Department Florida.

Theory of Flight 6.05 Lift and Drag

Wind Engineering Module 3.1 Lakshmi Sankar Recap In module 1.1, we looked at the course objectives, deliverables, and the t-square web site. In module.

Airfoil Terminology and Pressure Distribution Lecture 3 Chapter 2.

2D Airfoil Aerodynamics

1 Lecture 4: Aerodynamics Eric Loth For AE 440 A/C Lecture Sept 2009.

BIRD’S AERODYNAMICS.

Lecture Leading Cadet Training Principles of Flight 3 Drag.

Introduction to Aerospace – Historical Perspective Dr. Doug Cairns.

1 Chapter 6 Elements of Airplane Performance Prof. Galal Bahgat Salem Aerospace Dept. Cairo University.

4 Forces of Flight & Stability

Airfoils. Airfoil Any surface that provides aerodynamic force through interaction with moving air Moving air Airfoil Aerodynamic force (lift)

ROTARY WING AERODYNAMICS

Aerodynamic Design of a Light Aircraft

Airfoils, Lift and Bernoulli’s Principle

© 2009 Aviation Supplies & Academics, Inc. All Rights Reserved. The Pilot’s Manual – Ground School Aerodynamics Chapter 1 Forces Acting on an Airplane.

Review of Airfoil Aerodynamics

MAE 3241: AERODYNAMICS AND FLIGHT MECHANICS

The concept of the airfoil (wing section)

Warm-Up – 11/18 – 10 minutes Utilizing your notes and past knowledge answer the following questions: What are the three flight situations in which a stall.

Airfoil Any surface that provides aerodynamic force through interaction with moving air Aerodynamic force (lift) Moving air Airfoil.

Aerodynamic Forces Lift and Drag Aerospace Engineering

DRAG REDUCTION OF AIRPLANES - INDUCED DRAG

Theory of Flight 6.05 Lift and Drag References:

Boudary changed to Boundary Boundary Layer.

Subject Name: AERODYNAMICS - I Subject Code: 10AE54

Airfoils and Simulation

Aerodynamic Drag Force

Post-Stall Flow Control of Sharp-Edged Wings

Aerodynamic Forces Lift and Drag Aerospace Engineering

Airfoils and Simulation

Theory of Flight 6.05 Lift and Drag References:

Airfoils and Simulation

Section 8, Lecture 1, Supplemental Effect of Pressure Gradients on Boundary layer • Not in Anderson.

Drag and Lift Elliott.

Presentation transcript:

AE 1350 Lecture Notes #8

We have looked at.. Airfoil Nomenclature Lift and Drag forces Lift, Drag and Pressure Coefficients The Three Sources of Drag: –skin friction drag in laminar and turbulent flow –form drag –wave drag

Airfoil Drag Polar C d vs. C l Rough airfoils have turbulent flow over them, high drag. Smooth airfoils have laminar flow over at least a portion of the surface. Low Drag.

Form Drag Source: Form drag may be reduced by proper design, and streamlining the shape.

Supersonic wave Drag For a given airfoil or wing or aircraft, as the Mach number is increased, the drag begins to increase above a freestream Mach number of 0.8 or so due to shock waves that form around the configuration.

Shock waves

How can shock waves be minimized? Use wing sweep. Use supercritical airfoils, which keep the flow velocity over the airfoil and the local Mach number from exceeding Mach 1.1 or so. Use area rule- the practice of making the aircraft cross section area (from nose to tail, including the wing) vary as smoothly as possible.

How can shock waves be minimized? Use sweep. M= cos30  30  sweep

In your design... The Maximum Mach number is 0.85 Wings for supersonic fighters are designed to reduce wave drag up to 80% of the Maximum speed. In our case, 80% of 0.85 is If we use a wing leading edge sweep angle of 30 degrees or so, the Mach number normal to the leading edge is 0.68 cos 30° ~ 0.6

Effect of Thickness and Sweep on Wave Drag Source:

Supercritical Airfoils Their shape is modified to keep the Mach number on the airfoils from exceeding 1.1 or so, under cruise conditions.

Conventional vs. Supercritical Airfoils

Wing Drag Since a wing is made up of airfoils, it has –skin friction drag –profile drag –wave drag at high speeds, and –Induced drag due to tip vortices

TIP VORTICES

Effect of Tip Vortices Downwash

Induced Drag Induced drag is caused by the downward rotation of the freestream velocity, which causes a clockwise rotation of the lift force. From AE 2020 theory, e= Oswald efficiency factor

Variation of Drag with Speed Induced drag decreases as V increases, because we need less values of C L at high speeds. Other drag forces (form, skin friction, interference) increase. Result: Drag first drops, then rises.

At High Values of  Wings Stall We need high C L to take-off and land at low speeds.

Achieving High Lift

One form of flaps, called Fowler flaps increase the chord length as the flap is deployed.

High energy air from the bottom side of the airfoil flows through the gap to the upper side, energizes slow speed molecules, and keeps the flow from stalling. How do slats and flaps help? 1. They increase the camber as and when needed- during take-off and landing.

Leading Edge Slats Help avoid stall near the leading edge

High Lift also Causes High Drag