Key Stage 3 A Pull-a-Long Toy ‘Freddie’ the Frog A Suggested Year 8/9 Project RA Moffatt WELB.

Slides:



Advertisements
Similar presentations
Fieldwork assessment The difference between AS and A2 David Redfern
Advertisements

Drafting I introduces students to the use of simple and complex graphic tools used to communicate and understand ideas and concepts found in the areas.
Developing Science Skills. Preparing for Tasks Level DLevel ELevel F individually or in small groups will identify two or three questions to investigate.
Template for the Storyboard stage. Title of the concept : Mechanism Synthesis : Motion Generation / Rigid Body Guidance, subject. Mechanical Engineering.
Raymond Moffatt welb Technology & Design A design opportunity! Unit 4: A suggested approach.
Key Stage 3 A Dancing Monkey A Suggested Year 8 Project RA Moffatt WELB.
Key Stage 3 A suggested Year 9-10 Project: To Manufacture a Pocket Torch RA Moffatt WELB.
Key Stage 3 A Bird Feeder A Suggested Year 9 / 10 Project RA Moffatt WELB.
Raymond Moffatt welb Technology & Design A Sketch a day!
Design Project Fischer Technik Construction Kit. Groups Groups of 4 required Initially by Self Selection DIS/CDE will allocate students to groups where:
Introduction to Design. The design process is an engineering activity that turns a concept into reality. The concept is a solution to a specific problem.
Ireland Education Design and Discovery Electronics Wednesday May 6th 2006 Drumcondra Education Centre.
Situation: A number of cooking operations are dependant upon some type of timing device to ensure that the food is prepared to the required standard.
The following projects have been down loaded as potential designing and manufacturing opportunities for Key Stage 3. Are they appropriate / topical? Could.
Technology Education Centre, Omagh Key Stage 3 A suggested Year 8-9 Project: A Mobile Phone Holder RA Moffatt WELB.
How Things are Designed and How Things Move Robert Love, Venkat Jayaraman June 26, 2008 SSTP Seminar – Lecture 3.
PRODUCT DESIGN Design AnalysisDesign Analysis Developing Design ProposalsDeveloping Design Proposals Manufacturing ProductsManufacturing Products + Exam.
RA Moffatt. WELB. Richard Foster - Time For Sports 16-Year-Old Entrepreneur Builds Successful Woodworking Business.
RA Moffatt. WELB. Design Opportunity: Design a novelty mirror based on a well known Cartoon character and using 2D CAD / CAM for manufacture. Mirror diameter.
To achieve a level 3 your work must show that: With some help you can gather information to help with designing your project You can draw suitable ideas.
RA Moffatt. WELB. Teacher’s TV Aims: To explore the use of mood boards as a source of inspiration when designing; To reflect upon teaching and learning.
November 30, 2010 DESIGN PROCESS
Technology and Design Key Stage 3 To model a Mobile Phone Holder Task: II 1.To develop an understanding of modelling! 2. To look at other ideas!
Key Stage 3 A Suggested Year 9-10 Project Technology & Design RA Moffatt WELB. RA Moffatt WELB.
Design Inspiration – Concepts! Raymond Moffatt WELB. Technology Education Centre: Omagh The following presentation of concept sketches has been compiled.
Technology and Design Key Stage 3 To design and model a Mobile Phone Holder Task: II Developing ideas through modelling RA Moffatt. AAO.
Lesson 3-2 The Design Process Foundations of Technology.
ME 201 Engineering Mechanics: Statics Chapter 3 – Part A 3.1 Condition for the Equilibrium of a Particle 3.2 The Free-Body Diagram 3.3 Co-Planar Force.
The Design Process By Gamal Prather. THE DESIGN PROCESS The design process is an engineering activity that turns a concept into reality. The concept is.
Mechanical Toy Project Justin Andrew McMillan, Joseph Paul Dewey, Matthew Aaron Hoskins.
We Are Learning To Understand symmetry; use a template; work accurately to a line This is because… When making products we often need to make patterns.
The Engineering Design Process
Session 1Design and Technology PGCE Design and Technology Course Outline.
An Electronic Food Timer
Task Analysis Exercise Project criteria Command term objectives Describe – give a detailed account of the PROBLEM and DESIGN NEED OR OPPORTUNITY (Page.
Inspirational – Conceptual Sketches Raymond Moffatt WELB. Technology Education Centre: Omagh The following concept sketches are just a sample extracted.
CAM Toy Project Name: Group: Teacher: This unit will introduce you to a range of resistant materials techniques and equipment. You will be designing a.
1. Technology Page 2 MECHANISMS A mechanism is a device that changes an input motion and force into a desired output motion and force. There will be occasions.
Mechanisms.
Graphing Stories: Quadratic Functions
Key Stage 3 A Key Fob Light A Suggested Year 8 Project RA Moffatt WELB.
A method for understanding product design. After this presentation you will be familiar with: Design concepts and scientific principles behind the working.
Key Stage 3 National Strategy Misconceptions in Key Stage 3 science.
Opportunities for Discussion & Planning for the Revised Curriculum Raymond Moffatt WELB. Technology Education Centre: Omagh North West Cluster Meeting.
Moving Toys This term we are going to focus on one particular mechanism......cams.
IA: Advanced Manufacturing Techniques (10 hours) – Project – Pewter Casting Criteria Planning and Development Joining Moulding Casting Forming.
I cam, I saw, I conquered. With Steven Meredith and Gareth Jones.
Context: Designer Influences The work of a specific artist/designer/chef or Art/Design Movement could be the source of ideas for a new range of products.
Unit 16 Engineering Drawing
AS90737: Develop and communicate a solution to an engineering or technological design brief Sample 4 - Excellence.
AS90736: Develop and communicate a solution for an architectural or environmental design brief Sample 1 - Achieved.
Learning Objectives - To be able to identify key reasons why products have evolved over time - To understand how production has transitioned from craft.
Year 8 Clock Project Design & Technology Design Brief You are to design & make a 3D clock that is aesthetically pleasing and could be sold to a specific.
Design & Technology Curriculum 2000 CURRICULUM D&T Main changes - 1 –designing and making skills and knowledge and understanding have been re-ordered.
Year 9 Mobile Phone Station Design & Technology Example mobile phone docking station.
Machine Elements in Mechanical Design Prepared by: Misrty Dipen
Project Overview CNC Introduction Applying CNC Designing for CNC
Mechanisms There are 4 types of movement Rotary Linear Oscillating
Introduction to Design
Technology & Design A design opportunity! Unit 4:
Design and Communication Graphics DCG 6
Introduction to Lesson 7 Exploring green careers
Technical Graphics Design Appreciation and Awareness
Importance of Engineering Design
A Propeller Vehicle Design
Command Terms
Design Inspiration – Concepts!
Technology & Design Inspiration! – Conceptual Sketches
Key Stage 3 A suggested Year 8-9 Project:
PDT176 COMPUTER-AIDED DRAFTING CHAPTER 6 WORKING DRAWING
Presentation transcript:

Key Stage 3 A Pull-a-Long Toy ‘Freddie’ the Frog A Suggested Year 8/9 Project RA Moffatt WELB

A Pull-a-Long Toy ‘Freddie’ the Frog RA Moffatt WELB

A Mechanical Toy Design Learning Opportunities: To introduce pupils to basic mechanisms / mechanical movement – cams / eccentricity; To develop basic design and manufacturing skills; Design Appreciation: to understand that changes could be made to the design and to develop an awareness of the constraints when manufacturing. To develop an understanding of a range of manufacture processes; To introduce basic engineering concepts – fiction, Interference / clearance-fit, eccentricity, etc. Activity Description: Theory Mechanical Systems: : The pupils study mechanisms for approximately 3 x 35min periods; Manufacture: To manufacture a number of the models parts from set working drawings;

Design Opportunities: a)Show using concept sketches five alternative designs for the frog’s body; b)Explain using graphics the mechanical solution for making the toy move up and down include notes / annotation; c) Show using graphics how a cam may be fitted to make the head move up and down (reciprocate motion); d) Show examples of where an interference-fit and a clearance-fit is used in this project; e) Name two suitable materials for the body and wheels of this toy design? f)State a suitable protective finish for this project? A Mechanical Toy Design

Concept sketches

Key Stage 3 A Pull-a-Long Toy ‘Freddie’ the Frog A Suggested Year 8/9 Project RA Moffatt WELB

A Mechanical Toy Design Learning Opportunities: To introduce pupils to basic mechanisms and mechanical movement - cams, & linkages; To develop basic manufacturing skills and techniques; To develop a range of design and manufacture skills; To understanding a basic product specification; To be able to interpret a working drawing. Activity Description: Theory: The pupils study mechanisms for approximately 3 x 35min periods Manufacture: To manufacture a number of the models parts from set working drawings. Design Appreciation: to discuss alternative modifications to the toy design / reverse engineering

Alternative Pull-Long-Toy Design

Feedback: Privacy Policy Feedback
Do Not Sell My Personal Information
About project: SlidePlayer Terms of Service

© 2024 SlidePlayer.com Inc. All rights reserved.