PIRALU Pre-Insulated aluminium panels Poliuretanos, s.a. -Round Elbow CHAPTER 003-i -Bend of the panels

PIRALU Pre-Insulated aluminium panels Poliuretanos, s.a. Elbow Draw the template of the cover bottom and cut toward “EXTERNAL”. W+350mm W+200mm Cover bottomCover top 1 Aluminium tape

PIRALU Pre-Insulated aluminium panels Poliuretanos, s.a. Copy the template and to cut on the contrary: toward the “INTERIOR”. Cover bottom Cover top 2 Elbow

PIRALU Pre-Insulated aluminium panels Poliuretanos, s.a. Bent of the panels Exterior face Interior face 50mm 20mm

PIRALU Pre-Insulated aluminium panels Poliuretanos, s.a. Possibility to bend with different forms. Bent of the panels

PIRALU Pre-Insulated aluminium panels Poliuretanos, s.a. Cut the walls and make the female before of to glue. 3 Elbow

PIRALU Pre-Insulated aluminium panels Poliuretanos, s.a. Glue 4 Glue all the sides cut at 45º Elbow

PIRALU Pre-Insulated aluminium panels Poliuretanos, s.a. Paste the covers on the external wall. 5 Elbow

PIRALU Pre-Insulated aluminium panels Poliuretanos, s.a. Rotate the piece slowly on the external wall... 6 Elbow

PIRALU Pre-Insulated aluminium panels Poliuretanos, s.a....until the end. 7 Elbow

PIRALU Pre-Insulated aluminium panels Poliuretanos, s.a. Paste the internal wall beginning with the same place. 8 Elbow

PIRALU Pre-Insulated aluminium panels Poliuretanos, s.a. To press, to tape, to clip and to make the male. Pressing Aluminium tape 9 Silicon inside Elbow