TTL (Transistor Transistor Logic).  Transistor Transistor logic or just TTL, logic gates are built around only transistors.  TTL was developed in 1965.

Slides:

Advertisements

Similar presentations

TTL Logic Family 1. Introduction Uses bipolar technology including NPN transistors, diodes and resistors. The NAND gate is the basic building block Contains.

Advertisements

Digital Components Introduction Gate Characteristics Logic Families

Power Semiconductor Systems I

Ch 3. Digital Circuits 3.1 Logic Signals and Gates (When N=1, 2 states)

CH14 BIPOLAR DIGITAL CIRCUITS The Ideal BJT Transistor Switch

Digital Electronics Logic Families TTL and CMOS.

Ch 11 Bipolar Transistors and Digital Circuits

Introduction Since the beginning of the oil crises, which remarkably influenced power development programs all over the world, massive technological and.

1 SEMICONDUCTORS Tunnel an Varactor Diodes. 2 SEMICONDUCTORS PN diodes and zener diodes have lightly doped PN junctions and similar V-I characteristics.

Chap.10 Digital Integrated Circuits. Content  10-1 Introduction  10-2 Feature  10-3 Feature of BJT  10-4 RTL and DTL  10-5 TTL  10-6 ECL  10-7.

Voltage Transfer Characteristic for TTL

3.4 Bipolar Logic 1. Diode Logic

ECES 352 Winter 2007Ch 11 Bipolar Digital Pt. 21 Simplified Transistor - Transistor Logic (TTL) *Transistor - Transistor Logic (TTL) *Simplified form of.

EE365 Adv. Digital Circuit Design Clarkson University Lecture #4

CSET 4650 Field Programmable Logic Devices

Logic Gate A logic gate is an electronic circuit which makes logic decisions. It has one output and one or more inputs. The output signal appears only.

Digital IC Family.

INTEGRATED CIRCUIT LOGIC FAMILY

Logic Families and Their Characteristics

Electronic Troubleshooting Chapter 10 Digital Circuits.

Electrical Characteristics of Logic Gates Dr. Ashraf Armoush © 2010 Dr. Ashraf Armoush.

Contemporary Logic Design Multi-Level Logic © R.H. Katz Transparency No. 5-1 Chapter # 2: Two-Level Combinational Logic Section Practical Matters.

Power Amplifiers Unit – 4.1 Classification of Power Amplifiers  Power amplifiers are classified based on the Q point  If the operating point is chosen.

Integrated Circuit Logic Families. Outline  Integrated Circuit Logic Families.

1 SEMICONDUCTORS Transistor Biasing. 2 SEMICONDUCTORS Here we have a collector junction that forms a PN junction diode configuration that is reverse biased.

SEMICONDUCTORS Triacs and Diacs.

Chapter 4 Logic Families.

1.0 INTRODUCTION  Characteristics of the active electronic components that determine the internal construction and operation of electronic circuitry.

Chapter 11 Logic Gate Circuitry.

Logic Gates Chapter 6 Subject: Digital System Year: 2009.

IC Logic Families Wen-Hung Liao, Ph.D.

CMOS Logic.  The CMOS Logic uses a combination of p-type and n-type Metal-Oxide-Semiconductor Field Effect Transistors (MOSFETs) to implement logic gates.

Digital Electronics 2 - Transistors Introduction to CAD Naehyuck Chang

Power Amplifiers Unit – 4.1 Classification of Power Amplifiers  Power amplifiers are classified based on the Q point  If the operating point is chosen.

Bi-CMOS Prakash B.

Unit 2 Logic Families.

EE Electronics Circuit Design Digital Logic Gates 14.2nMOS Logic Families 14.3Dynamic MOS Logic Families 14.4CMOS Logic Families 14.5TTL Logic.

Electrical Characteristics of Logic Gates Gate Characteristics Last Mod: January 2008  Paul R. Godin.

17-1 McGraw-Hill Copyright © 2001 by the McGraw-Hill Companies, Inc. All rights reserved. Chapter Seventeen Bipolar Digital Circuits.

Stavan Patel( ) Vedant Patel( ) Vidhi Patel( ) 1.

Types Of Thyristors And Their Applications

MAHATMA GANDHI INSTITUTE OF TECHNICAL EDUCATION & RESEARCH CENTER NAVSARI - Patel Richa ( )

Programmable Logic Devices

CHAPTER 10 AC Power Bipolar Junction Transistors: Operation, Circuit Models, and Applications.

Logic Families There are several different families of logic gates. Each family has its capabilities and limitations, its advantages and disadvantages.

Logic Families.

TTL BHAGWAN MAHAVIR COLLEGE OF ENGINEERING AND TECHNOLOGY, SURAT

Different Types of Transistors and Their Functions

Chapter 06 Logic Gate Circuitry.

Chapter 2 Overview of Power Semiconductor Devices

EI205 Lecture 3 Dianguang Ma Fall, 2008.

Power Semiconductor Systems I

Bipolar Junction Transistor

NAME:AKSHAY PATEL

Transistor Transistor Logic – TTL (74xx and 54xx series chips)

EI205 Lecture 15 Dianguang Ma Fall 2008.

LOGIC FAMILIES UNIT IV.

CMOS circuits and Logic families

Digital Computer Electronics TTL

SOLIDS AND SEMICONDUCTOR DEVICES - IV

Overview of Power Semiconductor Switches

POWER SEMICONDUCTOR DEVICES OVERVIEW

SOLIDS AND SEMICONDUCTOR DEVICES - IV

Chapter – 2 Logic Families.

ELECTRONIC SYSTEMS Note: There is no compulsory question set on Section 25 of the syllabus. Questions set on topics within Section 25 are always set as.

SOLIDS AND SEMICONDUCTOR DEVICES - IV

CHAPTER 60 SINGLE TRANSISTOR AMPLIFIERS

Overview of Power Semiconductor Switches

Presentation On Schottky Diode. Course Code:3208 Course Title : Microwave radar and satellite communication lab Presented By Salma Akter BKH F.

Presentation transcript:

TTL (Transistor Transistor Logic)

 Transistor Transistor logic or just TTL, logic gates are built around only transistors.  TTL was developed in Through the years basic TTL has been improved to meet the performance requirements. Introduction

 There are many versions or families of TTL  Standard TTL.  High Speed TTL  Low Power TTL.  Schhottky TTL.  As such all the families of TTL have three configuration for outputs.  Totem - Pole output.  Open Collector Output.  Tristate Output.

TTL circuit

 Thus it has two emitter-base junctions that can be used to turn Q1 ON.  The transistors Q3 and Q4 are connected in a totem- pole arrangement. Cont.,

Basic TTL NAND gate

 In normal operation, either Q3 or Q4 will be conducting, depending on the logic state of the output.  The transistor Q2 acts as a phase splitter. Cont.,

TTL NAND gate 3 input circuit

 When both the inputs A and B are at high level, the diodes D1 and D2 will conduct in reverse bias (OFF) and the diode D3 will conduct in forward bias (ON), hence Q1 goes in to cut off. Cont.,

 Now the current flow through the emitter of Q2 will turn On the transistor Q4.  At the same time the collector current of Q2 produces a voltage drop across R2 that reduces Q2 collector voltage to a low value.  Now the output is low because Q4 is conducting Cont.,

Diode equivalent for Q1

 When either or both inputs are low, the transistor Q1 conducts because the either, or both diodes D1 and D2 are conducting in forward biasing.  Now the diode D3 is not conducting properly, so not a sufficient current is flowing through the base of Q2.  Hence Q2 goes to cut-off. Cont.,

TTL NAND Gate with a Totem Pole Output Stage

 There is no emitter current of Q2, no base current of Q4, and it turns OFF.  The high collector voltage of Q2, turns On the transistor.  Actually Q3 acts as an emitter follower.  Now output is high, because Q4 is in cut-off.  The function of diode D is to prevent both Q3 and Q4 from being On simultaneously. Cont.,

 74 Series  Schottky TTL, 74S Series: higher speed  Low-Power Schottky TTL, 74LS series  Advanced Schottky TTL, 74AS Series  Advanced Low-Power Schottky TTL, 74ALS Series  74F-Fast TTL Improved TTL Series

Comparison of TTL Series

1.Operates reliably over the range from 4.75V to 5.25V 2.Operates in ambient temperature range from 0 to 70 0 C 3.One NAND gate requires an average power of 10mW. 4.Propagation delay range from 7ns to 11ns 5.Fan-out: It can drive standard TTL inputs. Characteristics of TTL gates

 Compatible with other logic circuits  Low output impedance  High speed operation  Good noise immunity  Low power dissipation  High fanout  Low cost Advantages

1.TTL ICs generate switching transistors 2.Used special techniques for circuit preparation 3.Wired output capability is not possible Disadvantages

…..Thank you….. The End