Coil HQ-03 CMM measurements R. Bossert Dec. 2, 2010.

Slides:

Advertisements

Similar presentations

Development of MgB2 Wires

Advertisements

How Bright is that star? Part 2 Luminosity And Radius.

1 Copyright © 2010, Elsevier Inc. All rights Reserved Fig 6.1 Chapter 6.

Region VI Membership Matthew J. Angiulo Western Region Deputy Director, Membership August 28, 2010.

Part- I {Conic Sections}

TQM05 (coil #36) Test Summary 1. TQ coil #36 in a mirror structure Coil #36 tested with a radiation resistant impregnation material 0.7-mm diameter Nb.

May 9, 2012D. R. Dietderich, LARP CM-18 Cable Fabrication Plans and Experience D.R. Dietderich Lawrence Berkeley National Laboratory bnl - fnal- lbnl -

Complete the square and write as a squared binomial. 1.1.x 2 + 6x + _____ = _____________ 2.2.x 2 – 10x + _____ = _____________ 3.3.x x + _____ =

Standard Form for a Circle Where the center is (h,k) and the radius is r. (h, k) r.

Coil TQ 36 size measurements F. Nobrega/ R. Bossert

SA Cylinders Spheres and Cones Math 10-3 Ch.3 Measurement.

Warm up Find the circumference of the circle with a sector area of

Coil HQ12 CMM measurements (before testing in HQM01) R. Bossert/R. Riley March 16, 2011.

Proposal for HQ Coil 27 Miao Yu, Steve Krave. What to do with the coil Laser sintering end parts with accordion slits Plasma coating these end parts Demonstrate.

LQ Reaction & Impregnation Tooling Internal Review F. Nobrega, N. Andreev August 13, 2007.

LQ Winding and Curing Tooling Internal Review F. Nobrega, N. Andreev April 9, 2007.

Equations of Circles. Equation of a Circle The center of a circle is given by (h, k) The radius of a circle is given by r The equation of a circle in.

11.6 Surface Area and Volumes of Spheres

Perimeter Perimeter of a shape is the total length of its sides. Perimeter of a rectangle length width length width = length + width + length + width P.

5.6 Surface Area of 3D Figures

Long HQ coil drawings now available 1 Miao Yu. Dead voltage taps in TQ/LQ/HQ coils Inner layer: 24, outer layer: 12 (33 inner/23 outer per coil for TQ/LQ/HQ)

S2 Glass Insulation Hexcel Corporation S2 Fiberglass Cloth #4522 with F81 Silane Finish. 30” (0.762 m) wide roll, 125 yards long (114.3 m),.0051” (0.130.

QXFSM1 Mirror Shim System R. Bossert Dec. 1, 2014 LARP Teleconference.

      H-13 

Edge Blend Constant radius edge blend Handlebar. Edge Blend - Variable 5 mm radius for 25% length of the edge 10 mm radius for the next 25% 15 mm radius.

How do I find the surface area and volume of a sphere?

1 QXF heater proposal M. Marchevsky, H. Felice, T. Salmi, D. Cheng, G. Sabbi, LBNL.

Nb3Sn Cable and Insulation for LARP High-Gradient Quadrupole Magnets

HQ Coil 23 and 25 Status LARP Video Meeting September 19, 2013 Dan Cheng.

Coil parts & Instrumentation issues for LQ/HQ coils tested at Fermilab HQ/LHQ coil parts task force.

Helene Felice HQ02 Assembly status 02/28/2012. HQ02 layout COIL 16COIL 15 COIL 17COIL 20 VIEW LOOKING AT LEAD END A C BD Sector A Sector B Sector C Sector.

      H-13 

Section 1.5 Circles. OBJECTIVES -Write standard form for the equation of a circle. -Find the intercepts of a circle and graph. -Write the general form.

Perimeter and Area of Rectangles, Squares, and Triangles

HiLumi-LHC / LARP Conductor and Cable Internal Review October 16 th and 17 th 2013 H. Felice LARP Short Magnets Fabrication and Test experience relevant.

LARP CM15 Magnet Testing Working Group SLAC, November 2 nd 2010.

Dan Cheng 6/11/2015 QXF coil measurements plan at LBNL.

S URFACE A REAS OF S PHERES. Surface Area of a Sphere Find the surface area of the sphere. Round to the nearest tenth. S=4  r 2 Surface area of a sphere.

LQ03 Titanium Pole Length Study Fred Nobrega LQ Collaboration Video Meeting June 27, 2008 BNL - FNAL - LBNL - SLAC.

 Lateral Surface Area : S = ½ P l  P represents the perimeter of the base and l represents the slant height  Total Surface Area : S = ½ P l + B 

Helene Felice 11/16/2011 LARP Collaboration Meeting 17 1 st HiLumi Collaboration Meeting CERN Status on HQ Coil Design and Fabrication.

EXAMPLE 3 Use the circumference of a sphere EXTREME SPORTS In a sport called sphereing, a person rolls down a hill inside an inflatable ball surrounded.

Section 9-3 Circles Objectives I can write equations of circles I can graph circles with certain properties I can Complete the Square to get into Standard.

Similar Shapes Area & Volume Factor. 4 3 ? 6 ?? 1.

Shape of a rain drop.

HQM01 Test Summary Outline -Magnet Instrumentation and Shim System -SG Data -Short Sample Limits -Quench Training at 4.6 K and 2.2 K -Ramp rate and Temperature.

The HiLumi LHC Design Study (a sub-system of HL-LHC) is co-funded by the European Commission within the Framework Programme 7 Capacities Specific Programme,

Chapter 10 Measurement Section 10.5 Surface Area.

Price List for Un-pressurized Sets Vacuum TubeTankLoading Quantity (sets)FOB Price US$ SizeQty(pcs)Capacity20 ’ GP40 ’ GP40 ’ HQ 58×1800m m L

Exercises for Q1. Insulated copper tube A thin walled 10 mm copper tube is used to transport a low-temperature refrigerant with a temperature that is.

DOE Review of LARP – February 17-18, 2014 SQXF Coil Design and Fabrication Winding and Curing Miao Yu February 17,

S. Caspi, LBNL HQ Magnet Program Shlomo Caspi LBNL LARP DOE Review FNAL June 1-2, 2011 BNL Jesse Schmalze Mike Anarella Peter Wanderer Arup Gosh FNAL Rodger.

Section 2.8 Distance and Midpoint Formulas; Circles.

QXF Reaction / Impregnation Fixtures J. Schmalzle 4/9/13.

Chapter 28 Sources of Magnetic Field Ampère’s Law Example 28-6: Field inside and outside a wire. A long straight cylindrical wire conductor of radius.

LHQ Coil Design and Features Miao Yu Fermilab May 09, 2012.

QXF magnet integration Paolo Ferracin Joint LARP/CM20 HiLumi meeting Napa Valley, CA, USA 8-10 April, 2013.

The reading is 7.38 mm. The reading is 7.72 mm.

1 Long QXF Mirror Fabrication (MQXFPM1) Rodger Bossert HiLumi-LARP Collaboration Meeting May 18-20, 2016 SLAC R. Bossert - HiLumi Collaboration Meeting.

1 MQXFS Mirror Fabrication R. Bossert, G. Chlachidze, S. Stoynev HiLumi-LARP Collaboration Meeting May 11-13, 2015 FNAL.

Surface Area of Pyramids and Cones

QXF Coil Fabrication & Tooling Reaction / Impregnation

HQ Mirror Assembly R. Bossert

SQXF Mirror QXFSM1 Strain Gauges

RF-Dipole Cavity Update

وكيفية عمل التقدير النجمي

Exam Jam PHY131 – 2nd Half – Dec. 8, 2017

Detection thresholds in LARP Magnets

Fred Nobrega September 4, 2019

Multiplying Radical Expressions

Presentation transcript:

Coil HQ-03 CMM measurements R. Bossert Dec. 2, 2010

Normalized to outer radius Normalized to all surfaces One square = 100 microns (4 mils) (Section 1143 mm from lead end, in stainless area) Coil HQ03 after testing

Normalized to outer radius Coil HQ03 after testing Normalized to all surfaces One square = 100 microns (4 mils) Coil HQ03 after testing (Section 864 mm from lead end)

Normalized to outer radius Coil HQ03 after testing Normalized to all surfaces One square = 100 microns (4 mils) (Section 619mm from lead end)

Coil 10 at 758mm from lead end looking from lead end After TQC01b 3.0 mils Example of a “typical” TQ coil after testing One square = 100 microns (4 mils)

LQ mm from LE 2nd measurement (after repotting) Example of a “typical” LQ coil (before testing) One square = 100 microns (4 mils)