HOLY TRINITY CATHEDRAL RENOVATION OF INNER DOME 2009 BY ALEXANDER BUILDERS & CO. LTD.

First assessment of inner dome cavity to identify make-up of structure and extent of damage. The inner dome support structure was found to consist of a Knogg structure (timber, mesh, mortar and plaster creating an inner dome) First Assessment – HTC inner dome

The inner dome support structure was compromised by severe termite infestation leading to cracks in the plaster. This would have to be rectified without affecting or damaging the artisan works painted on the plaster. Pest control was carried out using gas fumigation and residuals by Carib Pest before any works began on the interior structure. Works commence to reinforce & repair substructure

EPS foam in blocks was used to support the inner dome so that a small work crew could enter the inner cavity without damage to the face of the plaster throughout. Set-up of support structure

Work crews entered the 4ft inner cavity through this small crawl space to clear out all debris and affected wood before a new system of structural support was installed. Entrance to one quadrant of the Inner Dome

Note the wood structure that had clear signs of termite trails. Inside one quadrant of the four

Work-In-Progress

The Inner Dome Upon Completion

Moulding replaced with EPS Moulding

Inner Dome Upon Completion