IEM Industrial Electrical Mfg. (Canada) Inc. IEM Canada is a subsidiary of IEM US who is North America’s largest independent full-line manufacturer of electrical distribution and power quality equipment. Tradition. Technology. Innovation.

TRADITION. TECHNOLOGY. INNOVATION. IEM began business in a barn on a family ranch in Fremont, CA. Original team in 1950 The Barn – Original plant in 1950 2

TRADITION. TECHNOLOGY. INNOVATION. IEM grew along with Silicon Valley, moving to a 12,000 sq ft facility in 1957, expanding to 70,000 sq ft in 1980 and to 105,000 sq ft in 2003 with offices on the East Coast and Western Canada.

TRADITION. TECHNOLOGY. INNOVATION. IEM has been solving power distribution challenges for HP, Apple, and dozens of prominent companies since they were start-ups. A dedicated research division in Canada keeps IEM at the forefront of electrical distribution development. New LV Switchboard installation for AT&T – Hayward, CA 4

TRADITION. TECHNOLOGY. INNOVATION. IEM pioneered the use of fully integrated CAD and manufacturing systems, beginning in 1979 with the first CAD/CAM system for electrical equipment metal fabrication. 5

TRADITION. TECHNOLOGY. INNOVATION. IEM developed the medium voltage vacuum breaker in the 1980’s, pioneered the use of breakers on 21kV systems, and was the first to design a 3000A free standing breaker for utilities. 6

TRADITION. TECHNOLOGY. INNOVATION. At IEM today, tradition and technology still drive innovation. Products like state-of-the-art paralleling switchgear and medium voltage fully front- accessible arc resistant switchgear are the results of this process. 7

IEM’s Unique Parallel Manufacturing System IEM’s unique parallel manufacturing system allows complete flexibility and modification at any stage of the manufacturing process. This IEM Difference results in shorter manufacturing cycles, increased flexibility after start of production, and easy integration of special designs.

IEM’s Unique Parallel Manufacturing System Several manufacturing elements staged simultaneously All fabrication and finish in one location Parts produced at any point after design Redundant operations for powder coat Results in: Shorter manufacturing cycles More flexibility after manufacturing starts Easy integration of special designs 9

IEM Positioning 10

IEM Electrical Single Line Product Scope

IEM Product Scope Utility/Unit Substations Transformers Arc Resistant Switchgear Low Voltage Switchgear Medium Voltage Switchgear Paralleling Switchgear PLC based Control Systems IEM Generator Controllers Panel boards & CDPs Custom Walk-in Assemblies 12/24VDC Battery Chargers

Distribution and Lighting Panelboards Flexibility to integrate a wide range of components including surge suppression equipment, custom metering, receptacles, and more Up to 84 circuits in one panel Vertically mounted main and sub-feed circuit breakers Single phase and three phase Complete line of UL Listed interiors with 200% rated neutrals for non-linear loads

Switchboards Exceeding Industry Standards Devices can be individually (vertically) or group (panel/horizontally) mounted Custom sheet metal and bus flexibility for busway and transformer connections Rigid frame construction isolating bus and breaker assemblies from enclosure

Switchboards Exceeding Industry Standards Options include automatic transfer switches, TVSS, distribution transformers, and PLC or relay based transfer schemes Voltage ranges 120V to 600V Ampacity 400A to 6000A

Low Voltage Switchgear Industry leading power circuit breakers Indoor, outdoor non walk-in and outdoor walk-in enclosures Extensive variety of durable color finishes, using state-of-the-art electrostatic powdercoat paint process Power circuit breakers can be mounted in a fixed or draw-out configuration Voltage ranges 240V to 600V; Ampacity 800A to 6000A

New MV Metal-Clad Switchgear (Front Connected) IEM VESTA-AR Switchgear Rated Voltage: 5-15kV Current: 600-1200A VM-1 circuit breaker technology – ABB Full front accessibility Smallest footprint on the market (24” x 96” x 60”) Monoblock capacity for 2 sets CT’s on line & load Arc-resistant option available UL Listed, Arc Resistance ANSI/IEEE 37.20.7 and IEC 62271

Medium Voltage Switchgear Available in 5, 15, and 27 kV 18 18

MV Metal-Clad Switchgear (Circuit Breaker Assemblies) Voltage 2400V to 27kV Ampacity 600A to 3000A Available vacuum circuit breakers with optional choice of manufacturers Rear access for load and incoming connections Compartmentalized construction with breaker compartment for each device Unit substation primaries Indoor or outdoor non walk-in and outdoor walk-in enclosures

MV Metal-Enclosed Switchgear (Fusible Load Interrupters) Voltage 2400V to 27kV Ampacity 600A to 3000A Rear access for load and incoming connections Compartmentalized construction Unit substation primaries Indoor or outdoor non walk-in and outdoor walk-in enclosures

Unit Substations Converts distribution voltages to utilization voltages in any configuration up to 27kV Maximum flexibility with wide range of components and ratings Indoor or outdoor assemblies/construction Primary disconnect switch or circuit breaker up to 27kV Configures to any transformer manufacturer available

Paralleling Switchgear Integrates protection, metering, control and switching Allows maximum flexibility resulting in reduced energy costs, operational reliability, and uninterruptible maintenance Unlimited Design Options and Features Load priority control Generator priority control Custom Operator Interface screens Remote communications Utility paralleling

Custom Assemblies Custom Distribution Centers enable the integration of components or products tailored to address a variety of unique system needs Walk in enclosures Shore Power Switchgear Emergency Fused Coordination Panels Generator Cable Tap Boxes

Switchgear Technical Specifications IEM equipment passes stringent earthquake survival testing by the Southwest Research Institute and is fully qualified to worst-case response spectrum Meets or exceeds ANSI, IEEE, NEMA standards Listed to appropriate UL and CSA standards Tested to short time rating for 30 cycles (0.5secs) Tested to short circuit rating for 4 cycles (0.67secs) High density fully rated bus

All IEM Equipment Is Seismic Qualified IEM Low Voltage Switchgear, PIU Panels, and PIE Panels passed stringent earthquake survival testing by the Southwest Research Institute

Fully Rated Bus Superior Bussing Fully rated based on density not temp rating 1000A/in2 for copper 750A/in2 for aluminum In-house forming, bending and punching

Superior Enclosures Each designed for a specific application Rigid and square enclosure, limits distortion Dimension flexibility Aluminum, stainless, galvanized steel Custom powder coating paint finish

Metal Finishing Process Extends Product Life State of the art powder coat finishing system 5-Stage washer improves salt spray resistance to 3000hrs; exceeds industry requirement System is self-contained with no discharge of waste water

IEM Canada Specializes in Paralleling Switchgear and Control System Design IEM Canada was formed in 2007 as the new Canadian Sales, Service/Parts and local Manufacturing Center for IEM US. As an extension of the parent company, IEM Canada specializes in the design engineering and development of paralleling switchgear, protection and controls while offering all of IEM’s proven products and services. IEM Switchgear was recently installed at Canada Place, Vancouver , Eagle Ridge Hospital in Port Moody, B.C. and other cities across Canada

IEM Receives ISO 9001:2008 Certification for its Quality Management System

IEM Canada 24/7 Emergency Service To access IEM Canada 24/7 Emergency Services Please call (778) 373-9601 To Email iemcanada@iemfg.com

Committed to Green IEM is committed to maximize the use and minimize waste of our precious natural resources. Conditioning and distributing electrical energy efficiently while minimizing loss. Energy savings, waste reduction, recycling, water conservation, pollution prevention – all of these factors along with our unique ability to deliver innovative power solutions to an energy hungry world – enable IEM to make a sustainable difference.

The IEM Difference Proven track record, responsive, experienced staff Flexible, comprehensive solutions Leading-edge CAD software and tech support Components sourced from leading manufacturers Testing that exceeds industry standards

IEM Delivers For over 50 years, IEM has been delivering best-in-class electrical distribution systems for industries across the U.S. and Canada. We’d like to apply this expertise to your power distribution challenge.