Nyle’s orgins date back to 1977 when Donald Lewis patented the XDH Dehumidification system, which became the core of a very successful line of dehumidification lumber dryers for the hardwood market.

Today, Nyle Water Heating Systems LLC is America's only commercial heat pump water heater manufacturer with a 40-year track record of exclusively producing commercial and industrial refrigeration systems. 100% made in America and certified to UL 1995, Nyle heat pumps range from 25MBH-2,000MBH in heating capacity and are being utilized to produce domestic hot water for buildings such as Universities, Apartment Complexes, Laundry Facilities, Military Bases, etc.

Product Lines Geyser C-Series Commercial Water Heaters: Air Source & Water Source configurations available Heating capacity ranges from 25,000 – 250,000 BTUH Cooling capacity ranges from 20,000 – 211,000 BTUH Recovery rates up to 340 gallons per hour Geyser CWM-Series Modular Commercial Water Source Heaters: High capacity Water Source MODULAR configurations available Heating capacity ranges from 270 MBTUH → 2,000 MBTUH Cooling capacity ranges from 20 MBTUH → 1,700 MBTUH Recovery rates from 323 to 2,584 gallons per hour

Air to Water & Water to Water Nyle Heat Pump Water Heater Models Air to Water & Water to Water Water to Water Modular C25……………………27,400 BTUH C270WM………………..278,650 BTUH C60……………………66,800 BTUH C540WM………………..557,300 BTUH C90……………………92,300 BTUH C810WM………………..835,950 BTUH C125…………...…….131,600 BTUH C1080WM………….....1,114,600 BTUH C185…………………185,600 BTUH C1350WM………….....1,393,250 BTUH C250…………………249,800 BTUH C1620WM………….....1,671,900 BTUH C1890WM………….....1,950,550 BTUH C2160WM………….....2,229,200 BTUH * Performance based on 75°F ambient air at 60% RH, or 75°F source water with entering water temperature of 100°F * Performance based on 80°F source water with 70°F entering water temperature and 140°F leaving water temperature

Standard Unit Construction Double Wall Stainless Steel Brazed Plate Heat Exchanger, for Potable Water Side (NSF 61 Approved) Integrated Pump on Heated Side of System (NSF 61 Approved) Aluminum Enclosed Cabinet Nyle Gray Macropoxy (epoxy) paint, 6,500 hour Salt Fog Resistance Rating Coated Evaporator Coil (air units only) Single Wall Stainless Steel Brazed Plate Heat Exchanger, for Source Water Side Standard Connection Points Potable Water Inlet & Outlet Source Water Inlet & Outlet (Water Source) Source Air Intake & Exhaust (Air Source) Relay Contacts for External Source Pump (Water Source) Tank Temperature Probe Unit Main Power at Rated Voltage Condensation Drainage

Additional Options 5 Year Extended Compressor Warranty Blower Option for Air Source Units, Desirable for Ducting Applications Cold Ambient Air Kit for Air Source Units PLC Controls (Standard on C185 and Above) Modbus to BACnet Gateway Fluorokem HS Urethane Outer Coating, 10 Yr Manufacturer Warranty 304 or 316 Stainless Steel Enclosed Cabinet Compressor VFD for Load Varying Applications (where applicable) Copper Evaporator Air Coil Master Panel for Multi-Unit Applications

Applications HOTELS/RESORTS HOSPITALS APARTMENT BUILDINGS SCHOOLS DORMATORIES OFFICES INDUSTRIAL GEOTHERMAL COMMERCIAL LAUNDRY HYDRONIC HEATING PRIMARY FUNCTION: POTABLE WATER SECONDARY FUNCTION: WE COOL THE SOURCE WATER/AIR

Certifications TÜV SÜD Canada & USA C22.2 No.326-15 (UL 1995) This certification ensures that the electrical and refrigeration systems have been throughly tested to ensure safe operation and that all fail safes have passed. This also means that Nyle consistently maintains the same level of quality for every Heat Pump produced. We test our products 100% to ensure safe operation and to ensure the customer has push-button instillation. QPS Canada & USA C22.2 No.14-10 This certification establishes that the control equipment has been properly selected and applied to the current application and that the correct safeguards are in place to prevent electrical hazards within the Heat Pumps. NSF 61 – Observed by Nyle (National Sanitation Foundation) Drinking Water System Components We observe the NSF 61 standard by only using products certified for domestic water on the potable water side of the Heat Pump.

Air-Source Low Ambient Kit C250A 40°F Ambient Air Temperature Max. Amperage Draw (230V): 90.7 Amps Heating Capacity = 154,200 H.COP = 3 Cooling Capacity = 114,500 C.COP = 2.25 C250A 35°F Ambient Air Temperature (W/Heating Elements) Maximum Amperage Draw (230V): 157.4 Amps Heating Capacity = 154,200 H.COP = 1.44 Cooling Capacity = 114,500 C.COP = 1.07 Cool Dehumidified Air Out Evaporator Warm Source Air In Evaporator Heating Elements Cool Dehumidified Air Out Warm Source Air In E.W.T. = 60°F L.W.T. = 140°F

Building Management System (BMS) Integration Allows Monitoring of System call status Individual unit operating status Individual unit defrost cycle status Individual unit alarm status Individual unit run hours

Online Resources – Single Line Drawings

Online Resources - Layouts

Online Resources – Sizing Calculator

Online Resources – Webinar Training Series July 15th 11:30a – 12:45p EDST https://attendee.gotowebinar.com/register/2452440194614006029 More dates to be announced soon!

C125A System Recovery Rate at Rated Conditions: 202 GPH Entering Water Temperature: 60F Leaving Water Temperature: 140F Ambient Temperature: 70F Heating Capacity: 135,250 BTU/hr Cooling Capacity: 104,250 BTU/hr Power Input: 10.7 kW Heating COP: 4.8 Cooling COP: 3.8 Combined COP: 8.6 (EACH)

C185W System Recovery Rate at Rated Conditions: 2,018 GPH Entering Water Temperature: 110F Leaving Water Temperature: 120F Source Water Temperature: 54F Heating Capacity: 168,300 BTU/hr Cooling Capacity: 117,500 BTU/hr Power Input: 14.5 kW Heating COP: 3.4 Cooling COP: 2.35 Combined COP: 5.75 (EACH)

C250A System Recovery Rate at Rated Conditions: 393 GPH Entering Water Temperature: 60F Leaving Water Temperature: 140F Ambient Temperature: 70F Heating Capacity: 262,600 BTU/hr Cooling Capacity: 207,100 BTU/hr Power Input: 20 kW Heating COP: 4.1 Cooling COP: 3.3 Combined COP: 7.4

Best in class COP - Up to 9.65 Up to 160°F LWT NSF 61 Approved - No secondary approaches for maximum delivered water temperature for sanitary concerns UL1995:2015 CSA C22.2 TUV/SUD Safety and Quality Certified Factory service plans available Optional 5-year compressor warranty Optional Stainless-Steel Cabinet Optional Copper Evaporator Coil Flat plate HX options for a variety of applications such as pool heating

Thank you! Ryan Hamilton President rhamilton@nyle.com 207.405.1305