Routers and Routing Basics Review CCNA 2 v3 JEOPARDY Routers and Routing Basics Review

Acronyms Router Potpourri Interface External Ports A la Mode Final Jeopardy 100 100 100 100 100 100 200 200 200 200 200 200 300 300 300 300 300 300 400 400 400 400 400 400 500 500 500 500 500 500

Acronyms 100 IOS A: What is Internetwork Operating System?

Acronyms 200 POST A: What is the Power On Self Test?

Acronyms 300 NVRAM A: What is Non-Volatile Random Access Memory?

Acronyms 400 MOTD A: What is the Message of the Day?

Acronyms 500 VTY A: What are Virtual Terminal?

Router 100 Routing tables are found here. A: What is RAM?

Stores a startup configuration file even Router 200 Stores a startup configuration file even when the power is off. A: What is NVRAM?

Router 300 Location of a running configuration file A: What is RAM?

Router 400 Post instructions are stored here. A: What is ROM?

IOS image on a router by default is located here A: What is Flash memory?

Potpourri 100 This command is used to move from the interface configuration mode to the global configuration mode. What is Exit?

What is End? (also Ctrl-Z) Potpourri 200 This command exits from any configuration mode back to privileged EXEC mode. What is End? (also Ctrl-Z)

The command to disable an interface. Potpourri 300 The command to disable an interface. What is Shutdown?

Potpourri 400 Data enters and exits a router through these. What are interfaces?

The default number of previous commands stored in the history buffer Potpourri 500 The default number of previous commands stored in the history buffer What is 10?

Interface 100 Enter this command to assign an address to an interface. What is ip address <ip address> <netmask>?

Enter this command to enable an interface. What is no shutdown?

Enter this command to set a DCE serial port’s signaling rate. Interface 300 Enter this command to set a DCE serial port’s signaling rate. What is clock rate 56000?

Interface 400 This command allows one to clearly identify an interface. What is the description command?

What is interface serial 0? (or interface serial 0/0) From global configuration mode, this command allows one to configure a router’s first serial interface. What is interface serial 0? (or interface serial 0/0)

External Ports 100 The best port for router configuration and troubleshooting. A: What is the Console port?

External Ports 200 This type of port is used for WAN connections. A: What is a Serial port?

External Ports 300 This 8-pin port connects to a 100mbps LAN. A: What is a Fast Ethernet port?

External Ports 400 Use this port to attach a modem for dial-in access to a router. A: What is the AUXiliary port?

External Ports 500 This adapter is used to connect a console cable to a PC serial port. A: What is an RJ-45 to DB-9 adapter?

What is Global configuration mode? A la Mode 100 Chicago(config)# What is Global configuration mode?

What is privileged EXEC mode? A la Mode 200 Bucki# What is privileged EXEC mode?

A la Mode 300 Smart(config-router)# What is Router configuration mode?

A la Mode 400 Marina(config-line)# What is Line configuration mode?

What is Interface configuration mode? A la Mode 500 Batavia(config-if)# What is Interface configuration mode?

Final Jeopardy The three memory components that retain their contents when no power is present. A: What are ROM, FLASH, and NVRAM?