Contact adhesive Materials it can be used on: Wood, plastic, metal.

Slides:

Advertisements

Similar presentations

Wood Fasteners, Joinery, & Adhesives

Advertisements

Timber Derivatives- Manufactured Boards

Non-Arc Welding Processes Resistive heating, chemical reactions, focused light and electrons, sound waves, and friction can also be used to join materials.

The term gluing means to assemble parts with a glue or adhesive.

Adhesives And Their Uses

GCSE Resistant Materials Components, Adhesives and Applied finishes

What adhesive would you use mainly for wood, but can be used on paper, card, foam board and foam blocks. When you place a piece of paper over another,

Fasteners, Adhesives and Clamping Most wood products must be fastened together. There are several methods to accomplish this. Different types of glues,

Working With Acrylic 1. Acrylic Uses 2. Cutting Acrylic

Unit 1004 Produce basic woodworking joints © Pearson Education 2010 Printing and photocopying permitted Learning Outcome 4 Know about selecting materials.

Classification and Selection of Materials and Components.

Plastics and their uses

Bending and shaping materials in the DT workshop.

Adhesives. First Adhesives The first adhesives were natural gums and other plant resins or saps. It was believed that the Sumerian people were the first.

1 4/28/2003 Tech 140 Lecture – Casting & Rotational Molding Other Molding Processes While extrusion and injection molding processes are by far the most.

Using Adhesives. 1) Suggest an adhesive suitable for gluing together this Garden Bench Cascamite.

GCSE Valley College Name: Applying New Technologies: Investigating Engineering Products How is a Casio watch in manufactured: Materials.

© Learning and Teaching Scotland 2006 Soldering Soldering makes a permanent joint between two pieces of metal. It can be used on most metals but not aluminium.

Manufactured Boards.

Joining materials Wood, Metal and Plastics

Gluing and Clamping. Gluing There are many different types of adhesives for many different types of jobs. Glues can be used to bond wood to wood, wood.

Choose a material Wood Plastic Metal

Joining Metals.

Before we use plastics we need to think about the following processes:

Working with Acrylic Quiz Garden Furniture Baths Cooking Pots 1.Sheet Acrylic is often used to make?… Kitchen Worktops Tea Cups Fire Surrounds.

Adhesives Quiz Cascamite PVA Epoxy Resin Tensol Cement 1.Which type of adhesive would be best suited for gluing together these parts of a wooden Coffee.

Forestry 485 Lecture 2-5: Specific Types of Adhesives.

Forestry 485 Lecture 3-7: Mastics, Hot Melts, etc.

Copyright © 2009 Delmar, Cengage Learning Chapter 12 Synthetic Materials.

PAINTS AND CLEAR FINISHES Paints and clear finishes are thin coatings applied to surfaces in liquid form, which gradually dry to become flexible solids.

 There is an enormous selection of different timbers available. This range can be split into two groups:  Softwoods  Hardwoods.

Introduction to Manufacturing Processes Pt. 2 © 2012 Project Lead The Way, Inc.Principles Of Engineering.

Recap on different adhesives and where to use them.

Glues and Gluing Introduction to Woods Technology.

Specification section 3.4

Adhesives See if you can answer the following questions on adhesives. The answers are on following pages. 1J.Byrne 2013.

Bending and Laminating Wood

ADHESIVES. TWO MAIN INGREDIENTS – RESIN – GLUE SOLID SOLVENT – KEEPS LIQUIFIED UNTIL APPLIED.

Joining methods, including PVA adhesive, spray adhesive, solvent cement, hot melt glue (glue gun), epoxy resin, glue sticks, single and double-sided adhesive.

Joining Materials Theory. Knowledge and Understanding.

Joining Techniques To understand which adhesive(s) is the most suitable for joining like and unlike materials To understand the advantages and disadvantages.

Joining Techniques Continued.... Fusing Fusing is the process whereby two or more materials are joined by either: 1.Heating them until they melt and run.

Advantages of Plastic Light weight Resistant to corrosion Low thermal conductivity Can be translucent, transparent and opaque Electrically resistant Easily.

Woods joints are often glued to make them permanent. The strength of the joint depends on the marking out and cutting (accuracy)

Permanent Joining Nails: come in different shapes and sizes. Nails are much cheaper than screws and quick to put in. You do not need to drill holes in.

Adhesives Wood Manufacturing & Finishing J.Byrne

THERMOPLASTIC – this type of plastic can be heated up and shaped over and over again THERMOSETTING PLASTIC – this type of plastic can only be heated up.

Manufactured boards Manufactured boards are timber sheets which are produced by gluing wood layers or wood fibres together. Manufactured boards often made.

Adhesive joining.

Adhesive Suported by.

Wood Glue & Preserving and Finishing Products

A REPLACEMENT FOR SOLID TIMBER

Joining Metals.

Thermosetting Plastics

AQA GCSE 2 Working with polymer-based materials and fixings

RIVETING BY Sukhbir Singh.

Smart Materials & Adhesives

Joining Methods.

Adhesives Quiz.

Plastics There are many types of plastic with a variety of properties and uses They are split into two categories Thermoplastic (can be reheated and reshaped.

7.4 Polymers © Nelson Thornes

Use the knowledge you have learnt in previous lessons

Joining Metals.

Props Materials Section 4.

Presentation transcript:

Contact adhesive Materials it can be used on: Wood, plastic, metal. The adhesive is waterproof. Ideal for plastic laminates to chipboard for kitchen worktops. Strength : Gives a medium strength joint. Form: Comes in a liquid form and is applied using a spreader. How to use: A thin layer is applied to both surfaces. Then the surfaces are left to “touch dry”, then they are pressed together. Drying time: Instant.

PVA (Polyvinyl acetate) Materials it can be used on: Wood. Use: Widely used by woodworkers can be used in the construction of furniture. Strength : Gives a strong joint. Form: Comes in a liquid form and is applied using a brush or can be used straight from the bottle. Dries clear. How to use: Put on joint then joint must be held together while glue dries. Drying time: 4-24 hours.

“Cascamite” “Extramite” Synthetic resin “Cascamite” “Extramite” Materials it can be used on: Wood. Use: The adhesive is waterproof. Used by woodworkers can be used in the construction of furniture. Strength : Gives a strong joint. Form: Comes in a powered form and then mixed with water, it is applied using a brush. Dries an tan colour. How to use: Put on joint then joint must be held together while glue dries. Drying time: 6-8 hours.

Epoxy resin “Araldite” Materials it can be used on: Wood, plastic, metal. Use: The adhesive is waterproof. Can be used as adhesive and can also be mixed with a filler to bridge/fill gaps. Strength : Gives a strong joint. Form: Comes in two tubes, a hardener and a resin. How to use: Equal amounts of hardener and resin need to be mixed together and applied with a spreader. Joint must be held together while glue dries. Drying time: ½-6 hours

Liquid solvent cement “Tensol” Materials it can be used on: Thermoplastics. Use: The adhesive is waterproof. Form joining plastics such as Acrylic and High Impact Polystyrene. Strength : Gives a medium strength joint. Form: Comes in a liquid form and is applied using a brush. How to use: Put on joint then joint must be held together. Tensol does not “glue” plastics together, it dissolves the surfaces “fusing” the surfaces together. Drying time: 3-24 hours

Hot glue stick Materials it can be used on: Wood, plastic, metal. Use: The adhesive is waterproof. Only used for modelling or temporary fixings. Strength : Gives a weak joint. Form: Comes in a solid stick of glue with turns into a liquid when heated. How to use: Heated in special gun and applied directly to the joint from the nozzle. Drying time: On cooling. Hot glue stick

Cyanocrylate “Super glue” Materials it can be used on: Wood, plastic, metal. Use: The adhesive is waterproof. Commonly used to fix breakages around the house. Strength : Gives a medium strength joint. Form: Comes in a liquid form and is applied direct from the nozzle. How to use: Put on joint then joint must be held together while glue dries. Drying time: Instant.