Assembling the new bearing

↑ 1, removingΦ62 ring-Circlip, and take out the bearing following the attached process of removing bear) ↑

2, Put the o-ring and plastic cover on ↓ 2, Put the o-ring and plastic cover on ↓

↓ ↓

↓ ↓ 4, put the bearing until to the position of still can showing the circlip’s groove. Pls refer to the above picutre.

↓ 5，put the washer on the bearing, and insert the Φ30 circlip into groove for fixing the bearing

↓ 6，fix the Φ62 circlip on

7，fix the plastic cover，O-ring is pressed on the plastic cover.