Charles Jimbo Peji TEMBONG^^. consists of an air filter, pressure regulating valve with pressure gauge and a compressed air lubricator.

Slides:

Advertisements

Similar presentations

Unit C: Agricultural Power Systems

Advertisements

Purpose of Carburetion

Automotive A/C systems

Heating, Ventilation, and Air-Conditioning (HVAC) Systems

Service Delivery 3 Pumps.

Landstown High School Governors STEM & Technology Academy

Pneumatics Pneumatik By Clifford Mayhew St Helens College

Pneumatic Systems (Part 2)

Unit 14 -Air Preparation In this unit, we will discuss the preparation of air for use in a pneumatic system. Raw compressed air should not be used by pneumatic.

Interest Approach Identify the major systems of an engine.

ms4.18 Basic Pneumatic System/Tieh SF

VALVES TYPE & FUNCTION VALVES.

Some basics for FIRST Robotics

Pump Installation Vigyan Ashram, Pabal.

Cooling System For Gear Box Gear Box Cooler Air/Oil cooler fan driven Wash down Motor Gear Pump –Moves oil from gear box through cooler –Optional Oil.

What is going on inside a packed stuffing box?

Control of Pneumatic Energy

Connecting to industry. Filters Regulators Lubricators.

Muhajir Ab. Rahim School of Mechatronic Engineering

BASIC PNEUMATICS. Properties of Compressed Air Availability Easily stored in large volumes Simplicity in design and control Provides linear and rotary.

Chapter 10 Fluid Power Systems.

HYDRAULICS & PNEUMATICS

HVAC523 Basic Subsystems.

Air Conditioning in tropical climates Presented by Ranjeet Kumar Nayak.

What is Fluid Power? Fluid power is energy transmitted and controlled by means of a pressurized fluid, either liquid or gas. The term fluid power applies.

SIZING PNEUMATIC SYSTEMS. Introduction Pneumatic systems are sized to meet output power requirements. The air distribution system is sized to carry the.

Engineer Training Cooler TJ8300 / TJ8500 Cooler. Engineer Training Cooler TJ8300 / TJ8500 Confidential 2 Introduction.

CHAPTER 11 PNEUMATICS TRANSMISION

VIP4Air - VIP4Air/Slave Minimal Air/Oil Micro-lubrication Product Features and Operation Dave Stoyanoff - Dropsa USA.

Forging new generations of engineers. Basic Pneumatics.

Lesson Using Pneumatic Systems. Interest Approach Can you explain how air makes a pneumatic hand tool work?

Lesson 8 Using Pneumatic Systems. Next Generation Science/Common Core Standards Addressed?  CCSS.ELA Literacy RST Cite specific textual evidence.

Fluid conditioning. Reservoir Reservoir size The size of a compressed air reservoir depends on the: Delivery volume of the compressor Air consumption.

Tomislav Skračić, MA Undergraduate English Course for MARINE ENGINEERS 5th Semester Essential reading: SPINČIĆ, A., PRITCHARD, B, An English Textbook For.

LESSON THIRTEEN LUBRICATING OIL SYSTEM. 1.PRIMARY PURPOSE OF LUBRICATION To keep a clean layer of lubricating oil film / luboil film between the contacting.

Purpose of Carburetion

XAS 375 CD6 Compressors Committed to sustainable productivity

Ships Service Air System

Compressors. Standard Air Standard air has the following characteristics –14.7 psia (101 kPa abs) –Density lb/ft 3 (11.8 N/m 3 ) –Temperature 68.

How to generate compressed air Introduction 1Done by: Mr. Mohsen Elostaz.

Using Pneumatic Systems. Next Generation Science/Common Core Standards Addressed?  CCSS.ELA Literacy RST Cite specific textual evidence to support.

MECH1300 Pneumatic Components Topics Pneumatic Cylinders Pneumatic Motors Other Pneumatic Actuators Pneumatic Directional Control Valves Pneumatic Flow.

Fluid Power Control FLUID POWER INTRODUCTION TO PNEUMATICS # Learning Objectives : Upon completion of this chapter, Student should be able to …  Describe.

Chapter 13 Pneumatics: Air Preparation and components.

Understanding the system.

ME444 ENGINEERING PIPING SYSTEM DESIGN

Engineering II – August 2016

PNEUMATICS Chapter 5 Secondary Air Treatment

HYDRAULIC AND PNUEMATIC ACTUATION SYSTEMS

AIRCRAFT PNEUMATIC SYSTEMS

HYDRAULIC & PNEUMATIC CIRCUITS

GROUND SERVICING OF VARIOUS SUB SYSTEMS

GOVERNMENT ENGINEERING COLLEGE DAHOD

PNEUMATICS Chapter 4 Primary Air Treatment

HYDRAULICS & PNEUMATICS

Pneumatic Power Principles Of Engineering

Components of the Car AC System That You Should Know

Pneumatics Pneumatik By Clifford Mayhew St Helens College.

PRODUCTS (POWER PLANT)

Pneumatic Power Principles Of Engineering

Pneumatic Power.

BASIC PNEUMATICS.

Pneumatic Power.

Pneumatic Power Principles of Engineering

Pneumatic Power.

AIR COMPRESOR Chapter-13.

Large Air Systems – Sales Training

 PURPOSE OF LUB OIL SYSTEM In the 250 MW KWU turbines :  Single oil is used for  A] Lubrication Of All Bearings,  B] Control Oil For Governing System.

Preventive Maintenance

Pneumatic System Conditioning

Presentation transcript:

Charles Jimbo Peji TEMBONG^^

consists of an air filter, pressure regulating valve with pressure gauge and a compressed air lubricator.

Air Service Unit Air filter with water separator Pressure regulator with pressure gauge Oil mist lubricator ms4.18 Basic Pneumatic System/Tieh SF3 Simplified representation Detailed representation Pressure regulating valve LubricatorFilter Pressure gauge

Air filter with water separator To filter dirt and moisture from the air line ms4.18 Basic Pneumatic System/Tieh SF4 Filter element Drain FILTER THE AIR FILTER

The compressed air filter has the job of removing all contaminants from the compressed air flowing through it as well as water which has already condensed. The compressed air enters the filter bowl through guide slots. Liquid particles and larger particles of dirt are separated centrifugally collecting in the lower part of the filter bowl. The collected condensate must be drained before the level exceeds the maximum condensate mark, as it will otherwise be re-entrained in the air stream. THE AIR FILTER

The purpose of the regulator is to keep the operating pressure of the system (secondary pressure) virtually constant regardless of fluctuations in the line pressure (primary pressure) and the air consumption. THE PRESSURE REGULATOR

Pressure Regulator ms4.18 Basic Pneumatic System/Tieh SF8 THE PRESSURE REGULATOR

ms4.18 Basic Pneumatic System/Tieh SF9 THE LUBRICATOR The purpose of the lubricator is to deliver a metered quantity of oil mist into a leg of the air distribution system when necessary for the operation of the pneumatic system.

Oil mist lubricator (Lubricator ) To provide oil mist in the compressed air so as to lubricate the pneumatic components Reduce wear of component Protect from corrosion ms4.18 Basic Pneumatic System/Tieh SF10 Oil mist DrainVenturi tube Oil LUBRICATOR THE LUBRICATOR

Pressure Limiting Valve ( Safety Valve ) To prevent the maximum permissible pressure in a system from being exceeded ms4.18 Basic Pneumatic System/Tieh SF12 System pressure Outlet to Atmosphere System pressure To atmosphere Pressure relief valve adjustable