Oxygen/ Fuel Cutting and Welding source adapted from www.cteonline.org

source adapted from www.cteonline.org Oxygen/ Fuel cutting torches can be used to cut, pierce and gouge mild steel. source adapted from www.cteonline.org

Oxygen/Fuel Cutting Guidelines source adapted from www.cteonline.org

source adapted from www.cteonline.org Oxygen/ Fuel Cutting Welding and cutting operations use fire or combustion as a basic tool.  The process is very useful when properly controlled. However, it can be extremely destructive if not performed correctly in the proper environment. The work area must have a fireproof floor. Work benches or tables used during welding or cutting operations must have fireproof tops. source adapted from www.cteonline.org

source adapted from www.cteonline.org Oxygen/ Fuel Cutting Use heat resistant shields or other approved material to protect nearby walls or unprotected flooring from sparks and hot metal. Keep an approved fire extinguisher of the proper size and type in the work area.  Inspect it regularly to ensure that it is in proper working order.  Know how to use the fire extinguisher. Move combustible materials away from the work site.  If you can not move them, protect them with fireproof covers. source adapted from www.cteonline.org

source adapted from www.cteonline.org Oxygen/Fuel Cutting WARNING! Never perform welding or cutting operations on a container that has held toxic, combustible or flammable liquids or vapors.  Never perform welding or cutting operations in an area containing combustible vapors, flammable liquids, or explosive dust. source adapted from www.cteonline.org

source adapted from www.cteonline.org Oxygen/Fuel Cutting Good housekeeping practices improve the safety of any work area.  They are essential to the safety of welding and cutting operations due to the potential hazards involved. Keep all welding and cutting apparatus clean and free of grease, oil, and other flammable substances. source adapted from www.cteonline.org

source adapted from www.cteonline.org Oxygen/Fuel Cutting Warning! Never allow oxygen to contact grease, oil, or other flammable substances.  Although oxygen by itself will not burn, these substances become highly explosive.  They can ignite and burn violently in the presence of oxygen. source adapted from www.cteonline.org

source adapted from www.cteonline.org Oxygen/Fuel Cutting Ventilate welding and cutting work areas adequately.  Maintain sufficient air flow to prevent accumulation of explosive or toxic concentrations of gases.  Welding or cutting operations using certain combinations of metals, coatings, and gases generate toxic fumes.  Use respiratory protection equipment in these circumstances. source adapted from www.cteonline.org

source adapted from www.cteonline.org Oxygen/Fuel Cutting Gas flames produce infrared radiation which may have a harmful effect on the skin and especially on the eyes.  Select goggles or a mask with tempered lenses shaded 5 or darker to protect your eyes from injury and provide good visibility of the work.  source adapted from www.cteonline.org

source adapted from www.cteonline.org Oxygen/Fuel Cutting Wear flame resistant clothing, protective gloves, sleeves, aprons and safety shoes to protect skin and clothing from sparks and slag.  Keep collars, sleeves and pockets buttoned.  DO NOT roll up sleeves or cuff pants. source adapted from www.cteonline.org

source adapted from www.cteonline.org Cutting Torch Parts source adapted from www.cteonline.org

Typical Portable Oxygen/ Fuel Cutting Rig source adapted from www.cteonline.org

source adapted from www.cteonline.org

source adapted from www.cteonline.org Acetylene Regulator source adapted from www.cteonline.org

source adapted from www.cteonline.org Oxygen Regulator source adapted from www.cteonline.org

source adapted from www.cteonline.org Green = Oxygen Red = Fuel Oxygen/ Fuel Hose source adapted from www.cteonline.org

source adapted from www.cteonline.org Typical Cutting Torch source adapted from www.cteonline.org

Parts of a Cutting Torch source adapted from www.cteonline.org

source adapted from www.cteonline.org Spark Lighter source adapted from www.cteonline.org

source adapted from www.cteonline.org Cutting Tip source adapted from www.cteonline.org

source adapted from www.cteonline.org Welding Tip source adapted from www.cteonline.org

source adapted from www.cteonline.org Heating Tip source adapted from www.cteonline.org

source adapted from www.cteonline.org Flashback Arrestors source adapted from www.cteonline.org

Reverse Flow Check Valves source adapted from www.cteonline.org

source adapted from www.cteonline.org

Cutting Torch Manufacturers source adapted from www.cteonline.org

Oxygen/ Acetylene Cutting Torch Safety Hazards source adapted from www.cteonline.org

Working Pressure Gauge Failure source adapted from www.cteonline.org

Cracked Acetylene Hose source adapted from www.cteonline.org

Oxygen and Acetylene Cylinders Stored Improperly Under Stairwell source adapted from www.cteonline.org

Oxygen/ Acetylene Cutting Torch Stored on Unsafe Cart source adapted from www.cteonline.org

Oxygen/ Acetylene Cutting Torch Stored in Flammable Liquids Cabinet source adapted from www.cteonline.org

source adapted from www.cteonline.org

Oxygen/ Acetylene Safety This process can KILL you and others. Be sure to follow all safety rules. Be sure to completely shut down the cutting torch when the job is completed. Keep all oils and grease away from the regulators. When oxygen is compressed with a petrochemical, it becomes highly reactive and can explode. Imagine a 500lb bomb exploding in front of you. Will there be any pieces to pick up? source adapted from www.cteonline.org

Remember… Safety is Job # 1 source adapted from www.cteonline.org