Vibration & Temperature Sensor

Contents Why monitor vibration? Monitor a wide range of machines Vibration measurements Set alarm levels Mounting options Select a Node Select thresholds Battery life Models Specifications

Why Monitor Vibration? Predictive maintenance Vibration is often the result of components that are: Imbalanced Misaligned Worn Loose Improperly driven Detecting increased vibration early helps reduce machine damage and avoid failures Monitoring vibration reduces downtime Plan maintenance more efficiently Monitor machine run time

Monitor a Wide Variety of Machines Motors Pumps Compressors Fans Blowers Gear boxes

Vibration Measurements RMS Velocity RMS (root-mean-square) velocity is an indication of the vibration energy produced by the machine. Expressed in inches per second (in/s) or millimeters per second (mm/s) RMS velocity is used in the ISO 10816 vibration severity chart

Set Alarm Levels Set vibration alarms based on the ISO 10816 vibration severity chart Set temperature alarms up to 80°C

Mounting Options Standard bracket Magnet bracket (ships with sensor) Magnet bracket Two sided thermal transfer mounting tape

Mounting

Select Node* Q45 P6 Performance H6 Multihop Easily connect to vibration sensor using the 5-pin M12 Euro connector Set thresholds using DIP switches Built in LED light is pre-mapped to illuminate amber when the vibration threshold has been exceeded and red when the temperature threshold has been exceeded 2.4 GHz P6 Performance LCD display Star topology allows for up to 47 monitoring points Available in 900 MHz (1 Watt) and 2.4 GHz H6 Multihop Tree topology allows for multiple hops to cover longer distances and circumvent obstacles *Vibration sensor must be paired with a Banner Wireless Node

Select Vibration Threshold Vibration thresholds are DIP switch selectable on the Q45 Use UCT to set the temperature threshold and vibration thresholds for the P6 and H6 Description DIP Switches 1 2 3 4 Vibration alarm at 0.15 in/sec (default setting) ON OFF Vibration alarm at 0.25 in/sec Vibration alarm at 0.35 in/sec Vibration alarm at 0.55 in/sec Local light disabled (conserves battery) UCT configurable

Battery Life Q45: P6 and H6:

Models 1- Wire Serial Models Description Models Description Frequency QM42VT1 Vibration & temperature sensor with 1-wire Serial interface Models Description Frequency DX80N2Q45VT Q45 Vibration/temp node 2.4 GHz DX80N9X1S-P6 1-wire Serial Performance node 900 MHz DX80N2X1S-P6 DX80DR9M-H6 1-wire Serial Modbus MultiHop Slave DX80DR2M-H6

Vibration Sensor Specifications Supply Voltage 3.6 to 5.5 V dc Current Active comms: 11.9 mA at 5.5 V dc Mounting Threads M12 x 1 Indicators Green flashing: Power ON Amber flicker: Serial Tx Vibration Mounted base resonance: 5.5 kHz nominal Measuring range: 0 – 65 mm/sec or 0 – 6.5 in/sec RMS Frequency range: 10 – 1000 Hz Accuracy: ± 10% @25 °C Temperature Measuring range: -40 °C to +105 °C (-40 °F to +221 °F) Resolution: 0.1 °C Accuracy: ±3 °C Environmental Rating NEMA 6P, IEC IP67 Shock 400g