FRIGI-TECH REFLECTIVE ROOF COATINGS

MAIN BENIFITS INSULATES – Outperforms 7 of fiberglass insulation. Keeps interiors cooler and more comfortable. CUTS COST of air conditioning by up to 40%. Increase in storage capacity of fuel storage tanks. INSULATES – Outperforms 7 of fiberglass insulation. Keeps interiors cooler and more comfortable. CUTS COST of air conditioning by up to 40%. Increase in storage capacity of fuel storage tanks. INHIBITS RUST – Prevents perforation and damage due to corrosion. INHIBITS RUST – Prevents perforation and damage due to corrosion. PROTECTS - against UV, chemical damage. Is not affected by high winds or rain. Resists Mildew and algae. PROTECTS - against UV, chemical damage. Is not affected by high winds or rain. Resists Mildew and algae. REDUCES THERMAL SHOCK - by lowering roof temperatures by as much as 60 degrees. This translates to less expansion/contraction and less stress and wear on fasteners and connections. REDUCES THERMAL SHOCK - by lowering roof temperatures by as much as 60 degrees. This translates to less expansion/contraction and less stress and wear on fasteners and connections. WATERPROOF – Stops leaks and prevents moisture absorption on all surfaces. WATERPROOF – Stops leaks and prevents moisture absorption on all surfaces. FIRE RETARDANT – Zero flame spread. FIRE RETARDANT – Zero flame spread. IMPROVES APPEARANCE - with an extremely durable elastomeric finish that will not crack, chip, or peel. Can be tinted any color. Cuts your maintenance cost. IMPROVES APPEARANCE - with an extremely durable elastomeric finish that will not crack, chip, or peel. Can be tinted any color. Cuts your maintenance cost. ENVIRONMENTALLY SAFE – No asbestos, lead, vinyl acetate, plastics, oils, odors or gases. Wash with water. ENVIRONMENTALLY SAFE – No asbestos, lead, vinyl acetate, plastics, oils, odors or gases. Wash with water. ENCAPSULATES - asbestos surfaces and existing hazardous coatings. ENCAPSULATES - asbestos surfaces and existing hazardous coatings.

APPLICATIONS Any surface that heat needs to stay in or out of. Metal Metal Concrete Concrete Asphalt Asphalt Rubber Rubber Glass Tar and Gravel Wood Shingle

ENERGY STAR APPROVAL ENERGY STAR is a U.S. government- backed program helping businesses and individuals protect the environment through superior energy efficiency. ENERGY STAR is a U.S. government- backed program helping businesses and individuals protect the environment through superior energy efficiency.

PRODUCTS FRIGI-TECH TOP COAT FRIGI-TECH TOP COAT FRIGI-TECH TOP COAT II FRIGI-TECH TOP COAT II FRIGI-TECH PRIMER FRIGI-TECH PRIMER POLYESTER MEMBRANE POLYESTER MEMBRANE

TOP COAT An Acrylic white coating with nearly 400% elongation. Ideal for metal, built-up roofs with good drainage, shingles and all types of walls. Produces a tough washable coat that reduces dirt pick-up and stays cool with ceramic ingredient. An Acrylic white coating with nearly 400% elongation. Ideal for metal, built-up roofs with good drainage, shingles and all types of walls. Produces a tough washable coat that reduces dirt pick-up and stays cool with ceramic ingredient.

TOP COAT II All of the qualities of TOP COAT original with the added ability to resist standing water conditions. To be used on all surfaces in area that experience high humidity. Can reduce heat gain as efficiently as 7 inches of conventional insulation All of the qualities of TOP COAT original with the added ability to resist standing water conditions. To be used on all surfaces in area that experience high humidity. Can reduce heat gain as efficiently as 7 inches of conventional insulation

PRIMER 100% acrylic, Elastomeric roof mastic formulated to exhibit hi- adhesion and flexibility. For use over most types of roof and wall surfaces. Recommended for use on all foam roofs. 100% acrylic, Elastomeric roof mastic formulated to exhibit hi- adhesion and flexibility. For use over most types of roof and wall surfaces. Recommended for use on all foam roofs.

POLYESTER MEMBRANE A spun bound and woven 100% polyester fabric, which is embedded into the basecoat to prevent extreme movement by greatly increasing the tensile strength of the system. A spun bound and woven 100% polyester fabric, which is embedded into the basecoat to prevent extreme movement by greatly increasing the tensile strength of the system.

PROPERTIESPRIMER TC I TC II ASPHALT Viscosity Total Solids 50%50%55%53% Permeance Tensile P.S.I Elongation600%380%400%2000% Flex 0 F PassPassPassPass

% Solar Reflective ModifiedBitumenBlack6.8ModifiedBitumenTOPCOAT88.4ConcretePainted24.0Concrete Painted w/ TOPCOAT87.1GalvanizedMetal29.4GalvanizedMetalTOPCOAT88.0

METAL ROOF APPLICATION VISUAL INSPECTION and REPLACEMENT of DAMAGED BUILDING MATERIALS The substrate to be coated must be in SOUND condition. Physically inspect the surface area for missing or damaged building materials. Replace and/or repair all damaged areas back to sound and solid condition. Check for loose or missing fasteners (screws) and tighten or replace them. Inspect for any existing leaks and be sure to repair leaks prior to the application of coating. Make sure roof is adequately vented. Check with a roofing contractor if necessary. VISUAL INSPECTION and REPLACEMENT of DAMAGED BUILDING MATERIALS The substrate to be coated must be in SOUND condition. Physically inspect the surface area for missing or damaged building materials. Replace and/or repair all damaged areas back to sound and solid condition. Check for loose or missing fasteners (screws) and tighten or replace them. Inspect for any existing leaks and be sure to repair leaks prior to the application of coating. Make sure roof is adequately vented. Check with a roofing contractor if necessary.

METAL ROOF APPLICATION STEP#:2 PRESSURE CLEANING High Pressure Blast entire roof surface with at least 1500 P.S.I. of pressure using a water and chlorine solution (1 quart chlorine to 5 gallons of water). Thoroughly remove all dirt, oil, grease, residues, mold, mildew, algae and any other surface contaminants. When roof is completely cleaned, rinse with water only. Let roof surface dry before continuing. STEP#:2 PRESSURE CLEANING High Pressure Blast entire roof surface with at least 1500 P.S.I. of pressure using a water and chlorine solution (1 quart chlorine to 5 gallons of water). Thoroughly remove all dirt, oil, grease, residues, mold, mildew, algae and any other surface contaminants. When roof is completely cleaned, rinse with water only. Let roof surface dry before continuing.

METAL ROOF APPLICATION First Spot Prime all rusted areas and let dry at least 12 hours before applying the second coat of rust inhibitor to the effected area. Apply the rust inhibitor at a rate of square feet per gallon covering the entire rusted surface. Wet film thickness of mils wet resulting in dry film thickness of 7-9 mils. Let the rust inhibitor dry at least 12 hours before continuing First Spot Prime all rusted areas and let dry at least 12 hours before applying the second coat of rust inhibitor to the effected area. Apply the rust inhibitor at a rate of square feet per gallon covering the entire rusted surface. Wet film thickness of mils wet resulting in dry film thickness of 7-9 mils. Let the rust inhibitor dry at least 12 hours before continuing

METAL ROOF APPLICATION STEP#:4 CAULKING SCREWS Patch and Caulk all screws or fastener heads, cracks, crevices, fractures, holes, valleys, vents, voids, etc., with a Water Proofing caulk. Use a trowel or stiff brush to apply. Multiple coats are better than one thick coat if possible. STEP#:4 CAULKING SCREWS Patch and Caulk all screws or fastener heads, cracks, crevices, fractures, holes, valleys, vents, voids, etc., with a Water Proofing caulk. Use a trowel or stiff brush to apply. Multiple coats are better than one thick coat if possible.

METAL ROOF APPLICATION STEP#: 5 TAPING SEAMS Tape all visible seams, large cracks and fractures prone to water intrusion on roof surface. Apply a liberal coat of PRIMER at mils wet film thickness, directly to the affected area using brush, roller or airless spray and lay the POLYESTER MEMBRANE directly into the WET PRIMER. STEP#: 5 TAPING SEAMS Tape all visible seams, large cracks and fractures prone to water intrusion on roof surface. Apply a liberal coat of PRIMER at mils wet film thickness, directly to the affected area using brush, roller or airless spray and lay the POLYESTER MEMBRANE directly into the WET PRIMER.

METAL ROOF APPLICATION STEP#:6 PRIME COAT Apply PRIMER using 1- brush, 2- at least a one inch nap roller, or 3- at least a 1 gallon per minute, 3,000 P.S.I. piston type airless sprayer with a minimum tip size of.027 tip. STEP#:6 PRIME COAT Apply PRIMER using 1- brush, 2- at least a one inch nap roller, or 3- at least a 1 gallon per minute, 3,000 P.S.I. piston type airless sprayer with a minimum tip size of.027 tip.

METAL ROOF APPLICATION Apply the PRIMER at a rate of square feet per gallon covering the entire roof surface. Wet film thickness of mils wet resulting in dry film thickness of 7-9 mils. Let PRIMER dry at least 12 hours before continuing. Apply the PRIMER at a rate of square feet per gallon covering the entire roof surface. Wet film thickness of mils wet resulting in dry film thickness of 7-9 mils. Let PRIMER dry at least 12 hours before continuing.

METAL ROOF APPLICATION STEP#: 7 FIRST COAT of FINISH/TOP COAT When Spraying or Rolling TOP COAT the first coat of TOP COAT must be applied perpendicular to the coat of PRIMER to achieve a checkerboard pattern. Apply the first coat of TOP COAT at a rate of square feet per gallon per coat over the entire roof surface. Wet film thickness of mils resulting in dry film thickness of 8-10 mils. STEP#: 7 FIRST COAT of FINISH/TOP COAT When Spraying or Rolling TOP COAT the first coat of TOP COAT must be applied perpendicular to the coat of PRIMER to achieve a checkerboard pattern. Apply the first coat of TOP COAT at a rate of square feet per gallon per coat over the entire roof surface. Wet film thickness of mils resulting in dry film thickness of 8-10 mils.

METAL ROOF APPLICATION STEP#: 8 SECOND COAT of FINISH/TOP COAT Apply the second coat of TOP COAT at a rate of square feet per gallon per coat over the entire roof surface. Wet film thickness of mils resulting in dry film thickness of 8-10 mils. Let dry at least 24 hours before your Final Evaluation STEP#: 8 SECOND COAT of FINISH/TOP COAT Apply the second coat of TOP COAT at a rate of square feet per gallon per coat over the entire roof surface. Wet film thickness of mils resulting in dry film thickness of 8-10 mils. Let dry at least 24 hours before your Final Evaluation

METAL ROOF APPLICATION STEP#: 9 FINAL EVALUATION A detailed evaluation of the completed job will determine the quality of the workmanship and whether strict application specifications have been met. Be sure to check that all roof areas are completely coated and sealed under permanently placed roof items such as roof top air conditioning units. Divide roof into 1,000 square feet sections and randomly check one spot in each section for a dry film thickness of at least 20 mils. If specifications have not been met, determine how much material will be required to meet specifications and recoat. STEP#: 9 FINAL EVALUATION A detailed evaluation of the completed job will determine the quality of the workmanship and whether strict application specifications have been met. Be sure to check that all roof areas are completely coated and sealed under permanently placed roof items such as roof top air conditioning units. Divide roof into 1,000 square feet sections and randomly check one spot in each section for a dry film thickness of at least 20 mils. If specifications have not been met, determine how much material will be required to meet specifications and recoat.

EXAMPLES

EXAMPLES

BEFORE AND AFTER