Text Proposal of SA-Preamble Partition in IEEE 802.16m/D1 (15.3.6.1.2) Document Number: S80216m-09/1902r2 Date Submitted: 2009-08-30 Source: Yu-Hao Chang, Yih-Shen Chen, Pei-Kai Liao yuhao.chang@mediatek.com, yihshen.chen@mediatek.com Chih-Yuan Lin, Paul Cheng MediaTek Youngbo Cho, Jaehee Cho {youngbo.cho, jaehee1.cho}@samsung.com Samsung Electronics Jinsoo Choi, HanGyu Cho, Jin San Kwaj {emptylie, hgcho, samji}@lge.com LG Electronics Xiangying Yang, Yang-seok Choi, Kamran Etemad xiangying.yang@intel.com Intel Corp. Zhaohua Lu ZTE Venue: IEEE Session #63, Jeju, Korea. Re: Letter Ballot #30 on the Draft Amendment (IEEE P802.16m/D1) Base Contribution: N/A Purpose: To be discussed and adopted by TGm for the 802.16m amendment Notice: This document does not represent the agreed views of the IEEE 802.16 Working Group or any of its subgroups. It represents only the views of the participants listed in the “Source(s)” field above. It is offered as a basis for discussion. It is not binding on the contributor(s), who reserve(s) the right to add, amend or withdraw material contained herein. Release: The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution, and any modifications thereof, in the creation of an IEEE Standards publication; to copyright in the IEEE’s name any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s sole discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The contributor also acknowledges and accepts that this contribution may be made public by IEEE 802.16. Patent Policy: The contributor is familiar with the IEEE-SA Patent Policy and Procedures: <http://standards.ieee.org/guides/bylaws/sect6-7.html#6> and <http://standards.ieee.org/guides/opman/sect6.html#6.3>. Further information is located at <http://standards.ieee.org/board/pat/pat-material.html> and <http://standards.ieee.org/board/pat >.

Motivation Different types of ABS, such as macro-BS, hot zone BS, relay and femto, are all employed to satisfy various demands from different users in different area Each ABS carries an unique SA-Preamble sequence as its identity SA-Preamble set is divided into several non-overlapped subsets, each of which is reserved for different ABS types If SA-Preamble partition information is carried in SFH, AMS can select the preferred ABS type once it decodes the SFH without referring to the higher layer message, such as MAC message, to reduce network entry or handover latency The SA-Preamble partition should be flexible, depending on the deployment scenario, and the partition information should be passed to AMS without much signaling overhead

SA-Preamble Sequences in 802.16m According to the resolution of #474 comment in the Session 62nd meeting, 768 SA-Preamble sequences is divided into three segments, each of which contains 256 sequences For each segment, only half of 256 sequences are explicitly shown in IEEE C802.16m-09/1478r3. This is because the other 128 sequences can be generated by flipping and conjugating of the previous 128 codes Our partition method is applied to all three segments

Proposed SA-Preamble Partition Table (1/4) For each SA-Preamble segment, we first make a hard cut between macro ABS and non-macro ABS cell ID sets The total number of cell ID supported for macro ABS is [TBD] The size of macro/non-macro BS sets is fixed and is known to AMS No feedback is needed for the hard partition size

Proposed SA-Preamble Partition Table (2/4) For the non-macro ABS cell ID set, we further divided it into public non-macro ABS and CSG femto A [TBD]-bit index broadcasted in S-SFH-SP3 is used to indicate the size of these two partitions as below

Proposed SA-Preamble Partition Table (3/4) For public non-macro ABS partition, we can further divide it as HotZone, Relay, OSG femto and etc The partition information is broadcasted in AAI_SCD The detailed partition mechanism is TBD Example:

Proposed SA-Preamble Partition Table (4/4) For CSG femto partition, we further divide it into CSG open and CSG closed partitions The partition information is broadcasted in AAI_SCD The detailed partition mechanism is TBD Example:

Text Proposal Modify the following text in line 6 of Page 288 Idx = , q is a running index 0 to 255. SA-Preamble sequences are partitioned and each partition is dedicated to specific base station type like Macromacrocell BS, FemtoMacro Hotzone BS, femtocell BS and etc. The partition information is broadcasted in the extended system information. The cell types are categorized into macro ABS and non-macro ABS cells by hard partition with [TBD] sequences dedicated for macro ABS. The non-macro ABS cell information is broadcasted in a hierarchical structure, which composes of S-SFH SP3 and AAI_SCD-ADV. In S-SFH SP3, non-macro ABS cell type is partitioned as public and CSG femto cells. AAI_SCD-ADV provides finer partition information. The non-macro ABS cells can be further categorized different types, such as: hotzone, relay, OSG and etc. The CSG femto cells can be further categorized, such as: CSG-closed and CSG-open.