Seminar On NANO CONCRETE

Slides:



Advertisements
Similar presentations
Presented by Satish satyarthy Sunil
Advertisements

2.13 SPECIAL CONCRETES Low Cost Light Weight Heavy Weight Underwater Ultra High Strength Ultra Durable Architectural Low Noise Reduced environmental impact.
High Performance Concrete
CONCRETE MATERIALS Technology of Material II TKS 4012 Prepared by
Reinforced Concrete Design
PC Cement Hydration PCC consists of binder and aggregates. Aggregates are typically used in two factions: fines and coarse. The binder phase normally.
Nano-Concrete: Possibilities and Challenges P.N.Balaguru Rutgers University Ken Chong and Jorn Larsen-Basse National Science Foundation, USA.
AGGREGATES There are two types of aggregates Coarse Aggregates
Concrete Condensed1 Cement Production, Composition & Types.
Presentation about Reinforced concrete
ADMIXTURES to CONCRETE In modern days Concrete without an Admixture Is an exception.
Opportunities and Barrier Issues in Carbon Nanocomposites R. Byron Pipes, NAE, IVA Goodyear Endowed Professor University of Akron National Science Foundation.
KING SAUD UNIVERSITY COLLEGE OF ENGINEERING CIVIL ENGINEERING DEPARTMENT Students Names: Abdulrahman Albedah Ali Al-theeb CE-477 Supplementary.
Proportioning of Concrete Mixtures
Strength of Concrete.
Concrete. The word “concrete” originates from the Latin verb “concretus”, which means to grow together.
Mix Design Review.
Topic : MIX DESIGN OF CONCRETE Properties of concrete Submitted To: DR. AYUB ELAHI Submitted By: SOHAIB NASEER 2K9-scet-29/CIVIL M.ZAEEM FAKHAR 2K9-scet-03/CIVIL.
Science and Technology of Nano Materials
1 The Science of Shotcrete CIB Meeting June 5 th 2012.
By Israel Chavez Sumarriva
“Properties of Concrete” Introduction
NANOTECHNOLOGY Hyo Be Park 12C Chemistry Option C-7.
Design of Concrete Structure I Dr. Ali Tayeh First Semester 2009 Dr. Ali Tayeh First Semester 2009.
Concrete Technology Ch8: Proportioning Concrete Mixes Lecture 14 Eng: Eyad Haddad.
Mix design of self consolidating concretes Exercise 8.
Mix design of fiber reinforced concretes Exercise 9.
Eng. Malek Abuwarda Lecture 12 P1P1 Construction Methods Lecture 12 Production of Aggregate and Concrete.
Composition of cement paste, concrete admixtures and mix design of superplasticized concrete Exercise 4.
I. Introduction  Carbon nanotubes (CNTs), composed of carbon and graphite sheets, are tubular shaped with the appearance of hexagonal mesh with carbon.
CONTENTS INTRODUCTION GREEN LIGHTWEIGHT AGGREGATES GREEN CEMENT WITH REDUCED ENV. IMPACT PRODUCTION OF GREEN CONCRETE SUITABILITY OF GREEN CONCRETE IN.
Green Concrete 1 1.
Polymer Modified Steel Fiber Reinforced Concrete
1 NANOTECHNOLOGY IN CONSTRUCTION NANOTECHNOLOGY IN CONSTRUCTION Guided by, Prof.G. Krishnan sir Presented by Rahna meem Roll no:42.
MEGHA BALLARI AND PRACHI BORKAR VI SEM CIVIL
Nano Graduate School (NGS-NANO) Meeting Sep. 10 Lammi Prasantha R. Mudimela NanoMaterials Group TKK.
DESTRUCTIVE TEST METHODS OF HARDENED CONCRETE
High Performance Concrete. Content Introduction What is High Performance Concrete? Application Objectives General Characteristics Advantages Limitations.
Nanotechnology and Sustainability in the Construction Industry
5. FERROCEMENT.
Rajan singh rawat INTRODUCTION Admixtures are ingredients other than basic ingredients cement, water and aggregates that are added to.
SUBMITTED BY A.SHRIPATHY III-CIVIL ENGINEERING TAMILNADU COLLEGE OF ENGINEERING.
What is a Fiber…? Small piece of reinforcing material possessing certain characteristic properties. Can be circular or flat. Parameter used to describe.
 Experimental Part.  Data Collection and Analysis.  Conclusions and Recommendations.
Dr. Younis M. ALSHKANE and Dr. Serwan Kh. RAFIQ
Seminar On Green Concrete Submitted To: Submitted By:
CONCRETE TECHNOLOGY.
CONCRETE CHEMICALS & APPLICATIONS
REPLACEMENT OF CEMENT BY SILICA FUMES AND FLY ASH
Chemical Admixtures In Concrete
Zeeshan Ahmad*, Vartika Varshney, J.P. Tegar
A Seminar presentation on
Silica fume The transition zone is a thin layer between the bulk hydrated cement paste and the aggregate particles in concrete. This zone is the weakest.
Spectre SP and Spectre GOLD Plasticizing Admixtures Title goes here
High Performance Concrete
Application of Fibers in Refractory Composites
Introduction Methods Results Conclusions
Made By: Mukul Srivastava Roll No. : (36) Section : A2
FLY ASH USE AS A REPLACEMENT OF CEMENT
Ultra High Performance Concrete (UHPC)
Nanotechnology in Building and Construction Dr. Joannie W. Chin.
COMPRESSIVE STRENGTH OF CONCRETE USING SAWDUST AS FINE AGGREGATE
A STUDY ON HIGH PERFORMANCE CONCRETE WITH FLY ASH AND SILICA POWDER
ADMIXTURES???? Materials added to the concrete besides cement, water and aggregate. To improve the properties of the concrete required. Admixtures can.
G.GUNA….SRVEC DEPARTMENT OF CIVIL ENGINEERING
SUPER POZZOLANS :RICE HUSK ASH & MICROSILICA.
Super plasticizers These are linear polymers containing sulfonic acid groups. Two major commercial formulations 1- sulfonate melamine- formaldehyde condensate;
What is nanotechnology?
DOT Research Benefits All
CARBON NANOTUBE Rayat Shikshan Sanstha’s
Presentation transcript:

Seminar On NANO CONCRETE Submitted To: Submitted By: www.mobikida.wordpress.com Ghaytadak Satish Laxman 1 1

Content INTRODUCTION WHY NANOTECHNOLOGY FOR CONCRETE? WHAT IS NANO CONCRETE? NANO MATERIALS NANO SILICA BENEFITS OF NANO CONCRETE CONCLUSION SCOPE REFERENCES

INTRODUCTION Nanotechnology is one of the most active research areas which has wide applications in almost all the fields. As concrete is most usable material in construction industry it’s been required to improve its quality. Improving concrete properties by addition of nano particles have shown significant improvement than conventional concrete.

Why nanotechnology for concrete? Improves the materials’ bulk properties. Ability to control or manipulate materials at the atomic scale. NANOSCALE ATTACK ON ASR (ALKALI SILICATE REACTION) To obtain thinner final products and faster setting time. Cost effectiveness. Lowered levels of environmental contamination.

What is nano concrete? A concrete made with portland cement particles that are less than 500nm as a cementing agent. Currently cement particle sizes range from a few nano- meters to a maximum of about100 micro meters.

NANO MATERIALS Carbon Nanotubes. Nano-silica. Polycarboxylates.

CARBON NANO TUBES Carbon nanotubes are molecular-scale tubes of graphitic carbon with outstanding properties. They can be several millimetres in length and can have one “layer” or wall (single walled nanotube) or more than one wall (multi walled nanotube).

SINGLE WALLED CARBON NANO TUBES

MULTI WALLED CARBON NANO TUBES

PROPERTIES CNT are also highly flexible. Mechanically, CNT appear to be the strongest material. The smaller diameters. Stiffest and strongest fibers.

NANO SILICA Is the first nano product that replaced the micro silica. Advancement made by the study of concrete at nano scale have proved nano silica much better than silica used in conventional concrete.

NANO SILICA

PROPERTIES High compressive strengths concretes ( 15 MPa and 75 MPa at 1 day; 40 MPa and 90 MPa at 28 days and 48 MPa and 120 MPa at 120 days.) High workability with reduced water/cement ratio. Use of super plasticizing additives is unnecessary. Fills up all the micro pores and micro spaces. Cement saving upto 35-45%.

POLYCARBOXYLATES Polycarboxylates or polymer based concrete admixtures are High Range Water Reducing admixture (HRWR). low dosage-reduce water as much as high dosage of conventional admixtures. Higher dosage-produce Self Compacting Concrete (SCC). This admixture type is very suitable for underwater anti-washout concrete.

POLYCARBOXYLATES

RESULTS Resistance to compression - 40 to 90MPa in 1 day.Resistance to compression from 70 a 100 MPa (or more) in 28 days. Produces high resistance even with low addition (1 to 1.5 % of the cements weight) and gives self compacting characteristics with higher proportions (2.5 %).

Meets the norms of environmental protection. 70% less use of additives as traditional silica, super plasticizers or traditional fibres.

BENEFITS OF NANO CONCRETE Cessation of contamination caused by micro silica solid particles. Lower cost per building site. Concrete with high initial and final compressive and tensile strengths. Concrete with good workability. Cessation of super plasticizing utilization. Cessation of silicosis risk.

CONCLUSION Well dispersed nano particles increase the viscosity of the liquid phase, improves the segregation resistance and workability of the system. Accelerates the hydration. Better bond between aggregates and cement paste. Improves the toughness,shear,tensile strength and flexural strength of concrete.

SCOPE If Portland cement can be formulated with nano-size cement particles, it will open up a large number of opportunities. The cement will not only be more economical than organic polymers but also will be fire resistant. A number of investigations have been carried out for developing smart concrete using carbon fibers.

This will become a reality with nano-cement because nano- carbontubes are much more effective than carbon fibers. The thickness of the composite can be reduced to microns and hence flexible and smart cement composite can be manufactured.

References www.google.com www.wikipedia.com www.pptplanet.com www.pdfclass.com

Thanks