OPERATION & INSTALLATION 002-Indoor Dome Fix-NCS TBK-M70/71SLND Color Indoor Dome Camera HI-RES OPERATION & INSTALLATION NORMAL FEATURE IMAGE DIMENSION • SONY 1/3” Super HAD Color CCD • Back Light Compensation • Built-in 3.6mm Fixed Lens • Power: DC12V SPECIFICATIONS INSTALLATION First step : Open the dome with the ring unscrewed. Second step : There are two mounting holes on the dome base so that users can install the unit in any place such as on the ceiling, on the wall, on the fence and etc. Third step : The mounting in any place connecting the video & power cable, before connecting please check the below point. ▶ Power supply 1) Adaptor : DC12V/300mA 2) To avoid fire or shock hazard, use a UL listed power supply. ▶ Monitor Impedance : Set the impedance switch to a 75Ω standard position unless other equipment is looped out of the monitor. Fourth step : Adjust the Pan & Tilt of the camera module. Caution! To avoid smear, do not expose the camera directly to a strong light source such as the sun or spot light. Fifth step : Close the dome with the ring screwed. CABLE CONNECTION