DIN Rail Music Player HDL-MZDN.432A

Feature Features External input Internal SD card FM radio Voice prompts Play music from FTP

Device Description a. SD card b. Programming button c. Terminal + and – for left channel speaker d. Terminal + and – for right channel speaker e. DC24V power supply f. Audio OUT, connect to another audio in for another amplifier. g. Audio IN, connect to audio out of music play box h. FM antenna i. RJ45 j. HDL Buspro

Note NOTE: Ethernet port of it can be used for configuration and controlling, but HDL Buspro port of it can only be used for controlling.

Preparation Start up: Find a SD card (≤32GB, recommend to use Kingston brand) and format it as FAT32 (right click the SD and you will the option). Create several folders (requires 3-level folder hierarchy) in SD card and put some songs (.mp3 format) in them (folder name < 21 characters, song name ≤ 25 characters), then power off music player and insert the SD card. Power on and press the reset button (a very small button) on music player, the music player will acquire the default IP 192.168.10.250, then set the IP of PC as 192.168.10.x, see if the music player can be pinged successfully.

Basic Information Check the IP and MAC and port (default:6000), make sure there is no IP or MAC conflicts.

Playlist Turn to ‘Test’ setting page, refresh the playlist, you shall be able to see the songs here.

Music Source Enable the needed functions on the ‘SD card’, ‘FTP’, ‘FM’, ‘Audio-IN’ setting page, then you can select these sources and play them from DLP and i-Life interface. 1- SD-card: Play music in SD card 2- FTP: FTP Server 3- FM: FM radio 4- Audio-in: External audio input.

Party Mode For the ‘PA’ function (normally call it Party Mode), we can achieve the functionality that multiple MZDN.432A play the same song synchronously and the volume synchronously. Enable/disable the party mode by double pressing the top right button of DLP(set the host MZDN.432A ID in its music page)

Party Mode Party Master: This music player will be master, Group No.1 is valid, other groups are invalid. 4/20/2018

Party Mode Party Slave: can set 4 slave music players 4/20/2018

Party Mode Party Master and Slave: Group No. 1 is master player, Group No.2, 3, 4 are slave players 4/20/2018

FTP Setting The account and password pre-created in FTP Run FTP server in PC, e.g., “Home Ftp Server”. (see configuration video about Home Ftp Server ftp://59.41.255.150/softwares/HDL%20tutorial%20video/module%20tutorial%20video/12.%20Z-Audio%20and%20DLP/) The IP of PC in which the FTP server is running. The account and password pre-created in FTP

Direct Play You can play the any music by panel. 4/20/2018

LCD Music Page One DLP can control 24 MZDN.432A ID of MZDN.432A

LCD Music Page When songs in SD card or FTP changed, you can long press the first button (left part) of DLP to get the menu to refresh the playlists. Key1 left: press to shift audio source (long press to change settings ) right: PLAY/PAUSE Key2 Previous/Next playlist Key3 Previous/Next song Key5 turn pages Key4 Volume increase/decrease