1. Hotel Room Intelligent System applications SMART-HDL

2. 1.System Composition

3. Main Switch Route Work Monitor server Internet Smart-Hotel System schematic diagram Floor switch 1 Distribution box Host 1 Floor switch 2 Foreground 10/100M Ethernet Public control Distribution box Distribution box Host 2 Distribution box Host N …… more …… More floor

4. Smart-Hotel System schematic diagram Touch PanelMaster Card Door Bell Panel Emergency AC220V Power supplyMulti function output moduleHotel room control host INNER BUS Energy-saving lampTV Lighting Fan Connect with other rooms Floor Switch Ethernet MotorOthers Host distribution box Motion Sensor Air Condition Panel Air condition system S-BUS

5. Diagram for DEMO board L N INNER-BUS S-BUS Master CardPanelDLP Z-Audio Mix18 Room lampsFAN( to simulate an AC)Door Speaker Door Bell Ethernet Room Host Power LN

6. 2. system application

7. 1 Add a Room 2 Issue a Room card 3 Open the door with a room card 4 Insert a card for power 5 panel application ： Lamp/AC control 6 panel application ： Set service status clear-up/laundry/DND 7 panel application: Playing music Functions Show

8. 1. Add a Room Step1. Launch the Hotel Manage Software Click ‘Add Room’ icon to add a room

9. 1. Add a Room Step2. search room host Step3. select a device (room host) Step4. click to Add room (save and exit) ③ ② ④

10. 1. Add a Room Step5. Click to view/edit

11. 1. Add a Room Step6. Set Child module(Mix18) start loop 2.Right click here 1. Press the setting button of Multi function output module(Mix18) till the LED turn to red

12. 1. Add a Room Step6. Set Child module(Mix18) start loop 3.Click to read start loop and set to loop1

13. 1. Add a Room Step7. ① click to enter ’setup model’, ② enable Miracle Data Transmit ( 2 icon turn to black and white color). ①②

14. Card Writer (USB device, link to host PC) 2. Issue a Room Card

15. Step1. Click ‘CardReader’ icon to read and write a room card

16. 2. Issue a Room Card Step2 Card Read Step3 set Card Type: guest/Visitor Valid Time: Today+Add Valid Area Count: 1 Valid Area: Build 01 Floor 01 Room 101 Step4 Card Write ② ③ ④

17. 3. Open the door with a Room card Lock unlock

18. 3. Open the door with a Room card ① ② ③ Step1. S-BUS software > door bell > Key assignation Step2. select Key no.2 RF switch Step3. Setup a relay to unlock/lock the door(CH16 relay on demo board)

19. 3. Open the door with a Room card Step4. Auto lock setting When connecting a door magnetic sensor to one of the 2 Dry contacts, we can set it trigger to lock the door( once the sensor detect the door closed for a preset time)

20. Step5. set Room information( match with RF room card) 3. Open the door with a Room card Set Building / Floor / Room number

21. 4. Insert a card for power ——Intelligent ID Identify Identified by the card, guest or waiter, will get differ control right to the room’s panels and devices by differ preset scene.

22. 4. Insert a card for power Step1: view/edit ID from ‘Basic information’ label Step2: set Hotel Panel Setting in ‘basic setting’ label Enable/disable card authentication: if disabled, even a blank card will gain the right of room devices’ controlling step1step2

23. 4. Insert a card for power Step3: set Card-Reader ID (enter a room > Setup mode > Room system data > ’Other’ label )

24. Step4: set Guest leave delay time We will set a scene ( when take out the room card, will trigger this scene to switch off all devices after ‘delay time’) 4. Insert a card for power Click to modify ① ②

25. Step5: appoint a scene order(4) for Occupancy – Null Scene 4. Insert a card for power 1.Selce Occupancy- Null Scene 2.Click to modify 3. Appoint scene4 for Occupancy- Null Scene

26. 4. Insert a card for power Step6: appoint a scene order(8) for Occupancy – Visitor Scene 1.Selce Occupancy- Visitor Scene 2.Click to modify 3. Appoint scene8 for Occupancy- Visitor Scene

27. 4. Insert a card for power Step7: setup scene4( Occupancy – Null Scene) ② ① Select and double click

28. 2.Select all targets 2.Enbale to control set all loop light to 0 1.Enbale scene 4. Insert a card for power Step8: setup scene4( switch off all devices) 4.Save

29. 4. Insert a card for power Step9: setup scene8( welcome scene, run for guest’s first enter) ② ① Select and double click

30. 4. Insert a card for power Step10: edit scene8 for Occupancy – Null Scene 1.Select targets 2.Enbale to edit 3.Enbale scene 4.Save

31. 4. Insert a card for power Step11: Save all settings to Module when finished Click to save ② ①

32. 5. Panel application: lamps/AC control ① ② Step1: select a key and set Mode Step2: set control target(s): AC(CH1/2/3), Lamps( CH6/7/8/9), Dimming lamps(CH17/18)

33. 6. Panel application: set service status Press a key to set in room. Show status outside

34. 6. Panel application: set service status Step1: set Mode to single on/off Step2: set target Universal switch 1--Luandry, 2--DND,3--Clear-up ① ②

35. 7. Panel application: Playing music control S-BUS

36. Step1: find your Z-Audio from S-BUS A SD-card (format by FAT32) is needed, to insert into the Z- Audio before power on. 7. Panel application: Playing music

37. Step2: Set on DLP’s Music page label, add Z-Audio’s subnet ID and device ID, and Zone No.(Zone No.: each DLP can control 24 Z- Audio, so DLP has 24 Zone No. for Z-Audio control.) 7. Panel application: Playing music