Secure Resources - Beading Apply Plaster Materials to Backgrounds

Private and Confidential2 A Saint-Gobain company Using Beads Know the range and types of beads and the backgrounds they are used on

Private and Confidential3 A Saint-Gobain company Aims: Introduction to beads and their uses. Objectives: To recognise different beads, where they should be positioned and know how to fix them. Secure Resources - Beading

Private and Confidential4 A Saint-Gobain company Introduction: what do you know: 1. How many types of bead can you name ? 2. What materials are beads made from ? 3. How are beads fixed ? 4. How do we cut beads ? 5. Why would you not fix external beads with Gypsum Plasters ? Secure Resources - Beading

Private and Confidential5 A Saint-Gobain company Standard Angle bead: The standard angle bead is used to form reinforced angles when floating and skimming. The bead is galvanised steel to prevent it from rusting. The standard angle bead is also available in stainless steel or as a plastic bead to suit a variety of different circumstances. Secure Resources - Beading

Private and Confidential6 A Saint-Gobain company Stop bead: The stop bead is used to form a finished edge between different backgrounds or surface materials as shown, by using a stop bead it stops unsightly cracks between different materials and creates a definite finished line. Secure Resources - Beading

Private and Confidential7 A Saint-Gobain company Movement / Expansion Bead: The main use for this bead is to form a movement joint where there is a movement joint in the background materials to avoid cracking. This bead is can be used to form a finish between two different backgrounds to compensate for the differing expansion rates of the materials Secure Resources - Beading

Private and Confidential8 A Saint-Gobain company Thin coat angle beads: Thin coat angle beads are used to reinforce the external angles on plasterboard, also available with mesh wings to assist when bedding in position. Secure Resources - Beading

Private and Confidential9 A Saint-Gobain company Thin Coat Stop Bead: Thin Coat Stop Bead used in the same way as a standard stop bead but only used internally for finish plasters Secure Resources - Beading

Private and Confidential10 A Saint-Gobain company Plasterboard Edge Bead: This bead is used to protect the edge of the plasterboard when there is no abutment. Secure Resources - Beading

Private and Confidential11 A Saint-Gobain company Bellcast Bead: This bead is found externally, it forms a drip at the bottom of an external render, it is also used above door and windows for the same reason. When used at the base of a rendering It must be placed above the DPC as shown. DPC Secure Resources - Beading

Private and Confidential12 A Saint-Gobain company Cutting beads: Beads are relatively easy to cut,but need care to avoid cuts from sharp metal edges. Firstly the length is measured and marked on the bead using a marker pen, then the nosing of the bead is cut with a hacksaw. The beads wings are then cut using a pair of tin snips. Secure Resources - Beading

Private and Confidential13 A Saint-Gobain company Fixing Beads: Fixing beads is in principal the same for all types of beads, they can be fixed both mechanically or bedded using appropriate materials. The beads should be fixed either plumb or level, and should be in alignment, and the nosing of the bead should always be left clean and free of any excess materials. Secure Resources - Beading

Private and Confidential14 A Saint-Gobain company Fixing Beads: When fixing the beads daubs of finish plaster should be put either side of the angle at a distance of no more than 600mm. If mechanically fixing, the fixings should also be spaced no more than 600mm apart. When fixing beads externally for rendering the beads should be fixed with the same mix as the render being applied or mechanically. Never use Gypsum Plasters. Secure Resources - Beading

Private and Confidential15 A Saint-Gobain company Fixing Beads: The bead should be put in place then checked for alignment, plumb or level, if bedded any excess materials should be removed before they set, and the nosing cleaned. Secure Resources - Beading

Private and Confidential16 A Saint-Gobain company You now should have the knowledge to complete the following. 1. How many types of bead can you name ? 2. What materials are beads made from ? 3. How are beads fixed ? 4. How do we cut beads ? 5. Why would you not fix external beads with Gypsum Plasters ? Secure Resources - Beading