Date of download: 7/10/2016 Copyright © ASME. All rights reserved. From: Three-Dimensional Viscoelastic Simulation for Injection/Compression Molding Based on Arbitrary Lagrangian Eulerian Description J. Comput. Nonlinear Dynam. 2016;11(5): doi: / Diagram of a point transformation in ALE scheme Figure Legend:

Date of download: 7/10/2016 Copyright © ASME. All rights reserved. From: Three-Dimensional Viscoelastic Simulation for Injection/Compression Molding Based on Arbitrary Lagrangian Eulerian Description J. Comput. Nonlinear Dynam. 2016;11(5): doi: / Diagram of polymer melt flow during compression Figure Legend:

Date of download: 7/10/2016 Copyright © ASME. All rights reserved. From: Three-Dimensional Viscoelastic Simulation for Injection/Compression Molding Based on Arbitrary Lagrangian Eulerian Description J. Comput. Nonlinear Dynam. 2016;11(5): doi: / Mixed finite elements used in this study with (a) P2(10) element: four vertices + six edge midpoints, (b) P1(4) element: four vertices in which —value of u,T and ×—value of p, τ Figure Legend:

Date of download: 7/10/2016 Copyright © ASME. All rights reserved. From: Three-Dimensional Viscoelastic Simulation for Injection/Compression Molding Based on Arbitrary Lagrangian Eulerian Description J. Comput. Nonlinear Dynam. 2016;11(5): doi: / Diagram of the dimension of the studied parts: (a) iso-thick part and (b) var-thick part. O—sensor location and ◀ —polymer entrance. Figure Legend:

Date of download: 7/10/2016 Copyright © ASME. All rights reserved. From: Three-Dimensional Viscoelastic Simulation for Injection/Compression Molding Based on Arbitrary Lagrangian Eulerian Description J. Comput. Nonlinear Dynam. 2016;11(5): doi: / Simulated meltfronts of iso-thick panel at times: (a) 3 s, (b) 5 s, (c) 7 s, and (d) 9 s Figure Legend:

Date of download: 7/10/2016 Copyright © ASME. All rights reserved. From: Three-Dimensional Viscoelastic Simulation for Injection/Compression Molding Based on Arbitrary Lagrangian Eulerian Description J. Comput. Nonlinear Dynam. 2016;11(5): doi: / Measured pressures of sensors 2 and 4 change with time during iso-thick part ICM Figure Legend:

Date of download: 7/10/2016 Copyright © ASME. All rights reserved. From: Three-Dimensional Viscoelastic Simulation for Injection/Compression Molding Based on Arbitrary Lagrangian Eulerian Description J. Comput. Nonlinear Dynam. 2016;11(5): doi: / Simulated meltfronts of var-thick panel at times: (a) 3 s, (b) 5 s, (c) 8 s, and (d) 10 s Figure Legend:

Date of download: 7/10/2016 Copyright © ASME. All rights reserved. From: Three-Dimensional Viscoelastic Simulation for Injection/Compression Molding Based on Arbitrary Lagrangian Eulerian Description J. Comput. Nonlinear Dynam. 2016;11(5): doi: / Measured sensors' pressures of iso-thick panel injection molding with injection velocity (for screw): 60 mm/s, filling/packing switch: 30 mm, packing pressure: 80 MPa, and melt temperature: 300 °C Figure Legend:

Date of download: 7/10/2016 Copyright © ASME. All rights reserved. From: Three-Dimensional Viscoelastic Simulation for Injection/Compression Molding Based on Arbitrary Lagrangian Eulerian Description J. Comput. Nonlinear Dynam. 2016;11(5): doi: / Comparison between the measured and simulated sensors' pressures of (a) iso-thick panel and (b) var-thick panel during filling and compressing stages. − (thick and discrete line) represents experimental data and − (thin and smooth line) denotes the simulated data. Figure Legend:

Date of download: 7/10/2016 Copyright © ASME. All rights reserved. From: Three-Dimensional Viscoelastic Simulation for Injection/Compression Molding Based on Arbitrary Lagrangian Eulerian Description J. Comput. Nonlinear Dynam. 2016;11(5): doi: / Comparison between the measured and simulated sensors' temperatures of (a) iso-thick panel and (b) var-thick panel during filling and compressing stages. − (thick and discrete line) represents experimental data and − (thin and smooth line) denotes the simulated data. Figure Legend:

Date of download: 7/10/2016 Copyright © ASME. All rights reserved. From: Three-Dimensional Viscoelastic Simulation for Injection/Compression Molding Based on Arbitrary Lagrangian Eulerian Description J. Comput. Nonlinear Dynam. 2016;11(5): doi: / Dimension of one-quarter of spherical part Figure Legend:

Date of download: 7/10/2016 Copyright © ASME. All rights reserved. From: Three-Dimensional Viscoelastic Simulation for Injection/Compression Molding Based on Arbitrary Lagrangian Eulerian Description J. Comput. Nonlinear Dynam. 2016;11(5): doi: / Comparison between the simulated (a) first normal stress difference and (b) photoelasticpictures Figure Legend: