Visit us at E mail: Tele:

Visit us at E mail: Tele: The requirements are: The competence to carry out tests and or calibration and sampling. Applicable to all organization performing tests and or calibrations. To develop management system for quality, administrative and technical operations Applicable to all organisations ISO17025 : SCOPE

Visit us at E mail: Tele: OBJECTIVES OF ISO: The principles of good laboratory practice should be applied to all type of test laboratory having private or in house and in any manufacturing unit for testing To establish quality in testing and reliability To prevent risk To detect deviations To correct errors To improve efficiency

Visit us at E mail: Tele: MESSAGE FROM ISO Message in 5 lines for laboratories F Say what you do F Do what you say F Record what you do F Check the difference F Act on the difference Message in 1 line Do right thing, first time, every time to achieve consistent quality Message in 1 line Continual improvement is the way of life

Visit us at E mail: Tele: Following factors determine the correctness and reliability of tests and or calibrations : Accommodation and environment conditions Test and calibration methods and method validation Equipment Measurement traceability Sampling The handling of test and calibration Items Technical requirements

Visit us at E mail: Tele: BENEFITS OF ISO:17025 Establish confidence of management and customers on your test results as well as test reports and increase customer trust as well as market share. It will give better image of company as a Quality producer in Global market. Provide hot tips on analysis of data as well as measure uncertainty and perfect record keeping. Provide guideline for doing testing and measurement in detail. Provide guidelines and better control for maintenance of instruments, environment control, preservation of test records etc.

Visit us at E mail: Tele: The laboratory shall procedure for control of nonconforming testing and or calibration work which ensures that The responsibilities and authorities for management of non conforming work Significant evaluation of non conforming work Customer is notified and work is recalled The responsibilities for authorizing the resumption of work The follow up of corrective action procedure if required CONTROL OF NONCONFORMING TESTING AND OR CALIBRATION WORK

Visit us at E mail: Tele: The above facilities should be facilitate correct performance of the test and or calibrations The technical requirement for accommodation and environmental condition shall be documented Environmental condition shall be monitored, controlled and recorded Following shall be considered Biological sterility, dust, electromagnetic disturbance, radiation, humidity, electrical supply, temperature and sound and vibration levels as appropriate Accommodation and environmental condition

Visit us at E mail: Tele: The laboratory shall have the procedure for the Transportation, Receipt, Handling, Protection, Storage, Retention and or disposal of test and calibration items Protection of the test or calibration items Handling of test and calibration items

Visit us at E mail: Tele: Equipment  Use appropriate equipment  Authorised personnel operate  Instructions available  Unique identification, inventory  Equipment calibration  Applies to outside equipment

Visit us at E mail: Tele: CONNECTIVITY OF GOOD LABORATORY PRACTICES( GLP) AND CONFIRMATIVE ASSESSMENT AS PER ISO:17025 System + Process + Facility + Personnel = confidance