doc.: IEEE c TG3c Presentation B. Bosco Nov 2008 Slide 1 Project: IEEE P Working Group for Wireless Personal Area Networks (WPANs) Submission Title: [Comment resolutions to LB48 for optional OOK/DAMI modes] Date Submitted: [21 January 2009] Source: [B. Bosco 1, K. Takahashi 2, Raymond Yu Zhan 2, Michael Sim 2, Abbie Mathew 3, Zhiguo Lai 3 ] Company [ 1 Motorola, 2 Panasonic, 3 NewLANS] Address [] Voice: [], FAX: [], [] Re: [] Abstract:[Resolutions to Comments on OOK and DAMI] Purpose:[This document provides a list of the editing staff that will be working on c.] Notice:This document has been prepared to assist the IEEE P It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein. Release:The contributor acknowledges and accepts that this contribution becomes the property of IEEE and may be made publicly available by P
doc.: IEEE c TG3c Presentation B. Bosco Comment Resolutions for Optional OOK and DAMI PHY Modes Rev 0 Motorola, Panasonic, NewLANS January 2009 Slide 2
doc.: IEEE c TG3c Presentation B. Bosco Summary This document provides the resolutions responding to comment CID#’s and 112 on optional low complexity modes. Comments are editorial. Comments # have been addressed by IEEE XXX c presented by Raymond Yu Zhan. Slide 3
doc.: IEEE c TG3c Presentation B. Bosco CID #112 Table 121 describes MCS design for options OOK/DAMI PHY modes. This should most logically directly follow Table 104. Therefore, the flow would be mandatory/optional modes followed by optional OOK/DAMI modes. FEC and other details can remain in Note that MCS tables are separate and the optional OOK/DAMI modes will be labeled as such so as to avoid any confusion. Recommended resolution: Move to follow Table 121 to follow Table 104 in directly Slide 4 CIDClauseSub clause PageLineTypeCommentSuggested Remedy TBD EThe optional low complexity mode MCS Table 121 is located in the middle of the SC PHY system design. It is cleaner to move this table to folow Table 104, mandatory MCS. Move Table 112 to follow Table 104 in