Presentation on theme: "Doc.: IEEE 802.15-09-0035-00-003c TG3c Presentation Jan. 2009 C.S SumSlide 1 Project: IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANs)"— Presentation transcript:
doc.: IEEE 802.15-09-0035-00-003c TG3c Presentation Jan. 2009 C.S SumSlide 1 Project: IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANs) Submission Title: [SC MCS-related Comments] Date Submitted: [Jan 20] Source: [C.S Sum, T. Baykas, J. Wang, R. Funada, M.A. Rahman, Z. Lan, C.W Pyo, F. Kojima, H. Harada, S. Kato] Company [NICT] Address [3-4, Hikarino-oka, Yokosuka, 239-0847, Japan] Voice: [+81-46-847-5092], FAX: [+81-46-847-5440], E-Mail: [email@example.com] Re:  Abstract: Purpose:[This document provides a list of the editing staff that will be working on 802.15.3c.] Notice:This document has been prepared to assist the IEEE P802.15. It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein. Release:The contributor acknowledges and accepts that this contribution becomes the property of IEEE and may be made publicly available by P802.15.
doc.: IEEE 802.15-09-0035-00-003c TG3c Presentation Summary Jan. 2009 Comment 114: Reinstate SC MCS with QPSK + RS(255,239), data rate 2830. Resolution: Accept. Reason: 1.Higher data rate for Kiosk application by simple extension on mandatory mode LR1-SF1 with BPSK and RS(255,239) Advantages: 1.Easy to implement if the devices are using LR1-SF1, without adding any new coding scheme. 2.The performance difference from the MCS with the nearest data rate, MR4 is 1.9 dB in CM2.3 (BER of 10e-6). This gives the implementers flexibility to select either a 1.9dB better performance (for higher reliability) or lower complexity in good channel conditions.
doc.: IEEE 802.15-09-0035-00-003c TG3c Presentation MR1 LDPC R=1/2 MR2 LDPC R=3/4 MR3 LDPC R=7/8 MR4 LDPC R=14/15 MR5 RS(255,239) PHY SAP rate (Mbps)15102270265028202830 Req. CNR at 10 -6 in AWGN [dB]184.108.40.206.69.9 Req. CNR at 10 -6 in CM2.3 [dB]5.89.812.413.315.2 The differences between MR4 (QPSK+LDPC(R=14/15) ) and QPSK +RS(255,239) is 1.9 dB in CM2.3.