1. Cutting Metals Quiz

2. Name the tool shown below
Tenon Saw
Name the tool shown below
Junior Hacksaw
Dovetail Saw
Panel Saw
Piercing Saw
Rip Saw
Hacksaw
Flush Cut Saw

3. 2.Which direction should the teeth
on a hacksaw point?
Backwards
Forwards
Does not matter

4. 3. Which picture shows the correct way of holding metal in the vice when using a
Hacksaw?
Picture A
Picture B

5. 4. Name the tool shown below
Tenon Saw
4. Name the tool shown below
Junior Hacksaw
Dovetail Saw
Panel Saw
Piercing Saw
Rip Saw
Hacksaw
Flush Cut Saw

6. 5. Name this hand tool..
Tin snips
Guillotine
Engineers Pliers
Diagonal Cutters

7. 6. What is wrong in this picture?
The bar being cut should be
further back in the jaws
Round bar should be cut in the
shear hole
The bar is too big to be cut in
this way
The bar being cut should be
further forward in the jaws

8. Click here for next question

9. 7. Why does the Gabro guillotine produce more waste material
than the bench shears?
Bench Shears
Because the cutting action produces
a waste notch
Because the Gabro guillotine
can cut thicker metal

10. 8. Which tool is most suited to cut 25mm steel rod?
Tinsnips
A Jnr Hacksaw
The Guillotine
A Hacksaw

11. 9. Which tool is most suited to cut 300 x 300 x 0
9. Which tool is most suited to cut 300 x 300 x 0.5mm steel sheet into strips ?
0.5mm steel sheet
Tinsnips
The Gabro guillotine
Jnr Hacksaw
A Hacksaw

12. Quiz Completed
Well Done

13. 
Wrong
Click here to try again