1. Friday Night RSVP Kit-09 Kit /w standard Red, Yellow, or Green LEDs…$10 Upgrade to bi-color R/G or G/Y..……+$2 Upgrade to bright Red, Yellow, Green, Blue, Violet, or White ………+$3 Upgrade to bright bi-color R/G………+$4 Upgrade to bright bi-color R/B………+$4 Upgrade to bright 10MM Red, Yellow, Green, Blue or White ……………...…+$5 For the 6pm – 10pm Session 12 LED Circle We always try to support different levels of assembly skills, this time we think we nailed them all with a single design. Starting with a 3 inch circle, we placed 12 LEDs around the edge, a very easy to solder board. Dale wanted support for 10mm LEDS, so we added support for them too! With so many assembly options, take a look through the options to decide how you want to assemble yours.

2. Kit /w standard Red, Yellow, or Green LEDs…$15 Upgrade to bi-color R/G or G/Y..……+$3 Upgrade to bright Red, Yellow, Green, Blue, Violet, or White ………+$6 Upgrade to bright bi-color R/G………+$8 Upgrade to bright bi-color R/B………+$8 Upgrade to bright 10MM Red, Yellow, Green, Blue or White ……………...…+$10 For the 6pm – 10pm Session 24 LED Sphere Looking for something really spectacular? Yes, we designed the 12 Circle boards so second board can interlock with the first, forming a sphere of 24 LEDs. But it gets better. There are multiple LED placement options for each board. Create a truly unique Blinkie! Friday Night RSVP Kit-09 & Kit-09b

3. Free-For-All Kit-01 Kit /w standard Red, Yellow, or Green LEDs…$0 Upgrade to bi-color R/G or G/Y..……+$1 Upgrade to bright Red, Yellow, Green, Blue, Violet, or White ………+$2 Upgrade to bright bi-color R/G………+$3 Upgrade to bright bi-color R/B………+$3 For the 10am – Noon Session 6 LED Circle This is a 6 LED Circle Blinkie Kit. It’s a 2.0” by 2.5” circuit board with a mounting pin on the back side. It has 6 LEDs controlled by a PIC processor. Multiple blinking patterns. Pattern selection button.

4. Saturday RSVP Kit-10 Kit /w bright RG( Yellow) matrix LEDs............$15 optional AC Power ……………...……+$5 For the Noon – 2am Session 8x16 Matrix After making the 5x7 Matrix, Dwayne always wanted to do something bigger. He had to overcome two problems. The 1st was how to light up so many LEDs (256, as each bi-color LED counts as two)! The 2nd issue, how long would it take to solder in all the LEDs? After searching the globe, Dwayne located the perfect parts - two beautiful 8x8 matrixes. He added 2 driver chips to improve the brightness. We still support the board with the standard four LR44 batteries, but have added support for external power. It's a 2.5" by 1.8" double-sided circuit board that will display various user-selectable patterns and text messages. The design has two buttons to select the pattern.

5. Simple 4 Kit-07 Kit /w bright Red LEDs ……………………...….$5 Upgrade to bright bi-color R/G..…....+$2 Upgrade to bright bi-color R/B.......... +$2 Upgrade to bright bi-color G/B.......... +$2 Upgrade to bright RGB 3mm.........…+$5 Upgrade to bright RGB 5mm............+$5 Upgrade to bright RGB 10mm..........+$5 For the 2pm – 5pm Open Session We picked up some bright LEDs with a built in flasher chip and we were so impressed with them, we created a simple, easy-to-solder 1.5” square board around them.

6. 6 LED Circle Kit-01 Kit /w standard Red, Yellow, or Green LEDs...$5 Upgrade to bi-color R/G or G/Y..…+$1 Upgrade to bright Red, Yellow, Green, Blue, Violet, or White........+$2 Upgrade to bright bi-color R/G.......+$3 Upgrade to bright bi-color R/B.......+$3 For the 2pm – 5pm Open Session This is a 6 LED Circle Blinkie Kit. Its a 2.0” by 2.5” circuit board with a mounting pin on the back side. It has 6 LEDs controlled by a PIC processor. Multiple blinking patterns. Pattern selection button.

7. 4 RGB Kit-04 Kit /w bright RGB Square LEDs ….................$10 Upgrade to bright round 5mm RGB...+$2 Upgrade to bright round 10mm RGB.+$5 For the 2pm – 5pm Open Session Dwayne found some most excellent square RGB LEDs, and created a prototype to showoff to Dale, convincing him it was worth the investment to buy lots of the LEDs. It's a 2.2” by 1.4” double-sided circuit board with a mounting pin on the back side. It has 4 RGB LEDs controlled by a PIC processor. And yes, there is an IR emitter and receiver for two way communication to other blinkie boards.

8. 19 LED Stick Kit-08 Kit /w standard Red, Yellow, or Green LEDs..$5 Upgrade to bright Red, Yellow, Green, Blue, Violet, or White.............+$5 For the 2pm – 5pm Open Session So, for a technical challenge, Dale asked how many LEDs can you put in a line using the our smallest PIC, the 12F683, and the 19 LED Stick was created. It’s a 0.6” by 8.25” double-sided circuit board with a hole for hanging from a lariat. It has 19 LEDs controlled by a PIC processor. This allows for some fairly intricate blinking patterns. And yes, there is an IR emitter and receiver for two way communication to other blinkie boards.

9. 19 LED Circle Kit-02 Kit /w standard Red, Yellow, or Green LEDs..$10 Upgrade to bi-color R/G …………….+$2 Upgrade to bright Red, Orange, Yellow, Green, Blue, Violet, or White ………………………………+$5 Upgrade to bright bi-color R/G ……..+$7 Upgrade to bright bi-color R/B………+$7 For the 2pm – 5pm Open Session This is a 19 Circle Blinkie Kit. It’s a 1.8” by 2.6” double-sided circuit board with a mounting pin on the back side. It has 19 LEDs controlled by a PIC processor. This allows for some fairly intricate blinking patterns. And yes, there is an IR emitter and receiver for two way communication to other blinkies.

10. 3x3 Matrix Kit-06 Kit /w standard Red, Yellow, or Green LEDs..$10 Upgrade to bi-color R/G ……………..+$1 Upgrade to bright Red, Orange, Yellow, Green, Blue, Violet, or White ………………………………+$3 Upgrade to bright bi-color R/G ….…+$4 Upgrade to bright bi-color R/B ….…+$4 For the 2pm – 5pm Open Session It's a 2.1" by 3.2" double-sided circuit board with a mounting pin on the back side that requires assembly and soldering. It has 9 single or bi-color LEDs that will display various user- selectable patterns. There is an IR emitter and receiver for two way communication to other blinkie boards. One of the special features of the 3x3 are the 5 push buttons.

11. 14 RGB Stick Kit-05 Kit /w bright RGB Square LEDs …………........$15 For the 2pm – 5pm Open Session The 19 LED Stick has proved to be very popular and so Dwayne wanted to improve on the design. Thus the 14 RGB Stick was designed. It's a 2.0" by 8.25" double-sided circuit board with a hole for hanging from a lariat that requires assembly and soldering. It has 14 RGB LEDs that will display various user-selectable patterns. There is an IR emitter and receiver for two way communication to other blinkie boards.

12. 5x7 Matrix Kit-03 Kit /w standard Red, Yellow, or Green LEDs..$10 Upgrade to bi-color R/G ……….…+$2 Upgrade to bright Red, Orange, Yellow, Green, Blue, Violet, or White ……………………………+$10 Upgrade to bright bi-color R/G……+$13 Upgrade to bright bi-color R/B……+$13 For the 2pm – 5pm Open Session This is a 5x7 Matrix Blinkie Kit. It’s a 1.8” by 2.95” double-sided circuit board with a mounting pin on the back side. Patterns and text scroll on a matrix made up of 35 LEDs. And yes, there is an IR emitter and receiver for two way communication to other blinkie boards.