1. 3M Touch Systems © 3M 2008. All Rights Reserved. MicroTouch Capacitive TouchSense ® System Tactile Touch for Gaming and Entertainment

2. 2 3M Touch Systems © 3M 2008. All Rights Reserved. What is Tactile Touch? Tactile Touch, created by the MicroTouch™ Capacitive TouchSense ® System, makes virtual on-screen buttons feel real. It supplies tactile feedback in response to a user’s touch, creating a more intuitive, engaging and natural experience for the player. With this system, a variety of touch-initiated tactile effects can be synchronized with audio and visual prompts, supplying game developers with a new set of interactive tools for greater creativity. MicroTouch is a trademark of the 3M Company. TouchSense is a registered trademark of Immersion Corp.

3. 3 3M Touch Systems © 3M 2008. All Rights Reserved. How Tactile Touch Works

4. 4 3M Touch Systems © 3M 2008. All Rights Reserved. How Tactile Touch Works  Tactile system utilizes lateral (X or Y) movement of the touch screen when touched (Z-Axis not supported)  Small displacement (<0.020”) with high acceleration causes skin on finger to stretch  Integrations are insensitive to finger pressure causing consistent tactile effects

5. 5 3M Touch Systems © 3M 2008. All Rights Reserved. Tactile Touch Components Purchase kits only, cannot purchase items separately. All kits start with 98-xxxx-xxxx-xx Kits include (3 components) 1)modified CTII Touch Screen containing mechanical strain relief (clip) and part numbers end in -99 2)Controller, EXII-9710UC or EXII-9720SC 3)# of actuators (31358) depending on size of Touch Screen.

6. 6 3M Touch Systems © 3M 2008. All Rights Reserved. Sample Gaskets in Stock  Gaskets – for small quantities, not for production  35016 – 4926 VHB 3/8”wide - $85.16/roll  35020 – Rogers Bisco BF-1000 ¼” wide - $3/strip  35039 – DuPont Delrin ¼” wide - $10.5/strip  35279 - 468MP transfer adhesive - $34.36/roll

7. 7 3M Touch Systems © 3M 2008. All Rights Reserved. Tactile Touch Components MicroTouch ™ Actuators 2, 4, 6 or 8 actuators (depending on display size) are mounted to the touch screen carrier and create predefined vibration effects based on the game’s play. MicroTouch Actuator

8. 8 3M Touch Systems © 3M 2008. All Rights Reserved. Tactile Touch Components Touch Sensor Carrier MicroTouch™ ClearTek™ II touch sensor and MicroTouch actuators are mounted to robust metal frame, which is mounted to the LCD display. Touch Screen Carrier Touch Sensor

9. 9 3M Touch Systems © 3M 2008. All Rights Reserved. Tactile Touch Applications Casino Slot Machines On-screen Game Buttons Mechanical Button Replacement

10. 10 3M Touch Systems © 3M 2008. All Rights Reserved. Reference Documentation  Guides  32384 Integration Guide  34662 USB Controller Reference Guide  34661 Serial Controller Reference Guide  Specifications  34495 MCT Touch Screen  34264 USB Controller  34263 Serial Controller  34494 Actuator

11. 11 3M Touch Systems © 3M 2008. All Rights Reserved. MCT Software  Software Developer’s Kit  34470 - Windows  34471 - Linux  Diagnostic Tool  34492 - Software Diagnostic Utility

12. 12 3M Touch Systems © 3M 2008. All Rights Reserved. Tactile System Integration

13. 13 3M Touch Systems © 3M 2008. All Rights Reserved. Tactile System Integration - Overall  LCD housing needs to be rigid to be able to transmit actuator forces  Actuators can be mounted on the sides or rear of LCD  Qty of actuators per system depend on total weight of touch screen and carrier/s, each actuator is capable of moving 300-400 grams.  Carrier/carriers provide the mechanical coupling from actuators to touch screen. carriers must have sufficient stiffness, thickness & material composition to transmit actuator forces  Touch screen is mounted to carrier/carriers which is then mounted to actuators. Tactile system “floats” above the LCD.  Seal between touch screen and front bezel  Level of sealing will depend on each individual integration and allowable bezel foam compression  Bezel foam compression effects tactile output

14. 14 3M Touch Systems © 3M 2008. All Rights Reserved. Tactile System Integration - Actuators  Actuators are designed for 300 to  400 grams per actuator (non- sealed system)  Systems with 4 actuators must not exceed  1600 grams  System is comprised of touch screen and carriers  System sealing will apply both a resistance and damping forces and need to be taken into consideration for acceptable tactile response  Systems with less mass will have stronger tactile effects & visa versa  Controller can accept up to 8 actuators  Actuators must be aligned/actuated in same direction  Actuators are wired in parallel from the controller but have no polarity  Actuators in system must be balanced before completing integration  Loosen screws that hold carriers to actuators, apply 12-16 VDC to all actuators at same time, tighten screws

15. 15 3M Touch Systems © 3M 2008. All Rights Reserved. Tactile System Integration – Actuator Mounting Side Mounting Rear Mounting

16. 16 3M Touch Systems © 3M 2008. All Rights Reserved. Tactile System Integration – LCD/Touchscreen Seal  Seal between LCD and touch screen is achieved utilizing  Delrin (0.010” thick) slides that are adhered to LCD and are between LCD and carriers. Delrin slides are parallel to direction of tactile movement. Delrin is adhered to LCD with 3M 468MP.  Bisco BF1000 (0.125” thick) foam that is adhered to LCD and is perpendicular to carriers as well as direction of tactile movement. Adhesive on foam is supplied by manufacturer and is single sided.  Adhering foam & Delrin to LCD facilitates easy removal of touch screen & carrier assembly

17. 17 3M Touch Systems © 3M 2008. All Rights Reserved. Tactile System Integration - Considerations  24VDC and ~1.25 amp/actuator (4 actuator system ~= 5 amps)  Sealing requirements will impact tactile system, need to plan ahead by evaluating entire system with appropriate level of sealing  Bisco BF1000 (open cell foam) at 1/8” and ¼” thick have worked well. Acceptable compression levels should be no more than 25% of the gasket  Customers will need to determine appropriate sealing for their application

18. 18 3M Touch Systems © 3M 2008. All Rights Reserved. Gasket Stack Up  Always mount Delrin parallel to movement of Actuators.  Mount Delrin only to LCD, 1 layer is all that is needed.  Do not compress the touch screen down on the LCD.  Allow smooth movement of the touch system over the LCD Bisco BF-1000 foam tape dust seal 3M 4926 VHB mounting tape Delrin low friction gasket for the carrier to slide on

19. 19 3M Touch Systems © 3M 2008. All Rights Reserved. Tail Considerations  Tail should run parallel to the actuator movement  Minimize stress on the tail, add loop  Do not run tail near backlight inverter  Avoid creasing tail near the connector

20. 20 3M Touch Systems © 3M 2008. All Rights Reserved. Effect Selector – 50 effects stored in controller

21. 21 3M Touch Systems © 3M 2008. All Rights Reserved. SDU Testing  MT7.12 driver or greater  SDU - Select “Tools” on tool bar, then “Haptic” on drop down

22. 22 3M Touch Systems © 3M 2008. All Rights Reserved. SDU Testing  Enter Effect #, example 0  Press “Play Effect”