Presentation is loading. Please wait.

Presentation is loading. Please wait.

Snapdragon S1 APQ7027A-based DragonBoard Quick Start Guide Rev. B June 2012 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Copyright.

Similar presentations


Presentation on theme: "Snapdragon S1 APQ7027A-based DragonBoard Quick Start Guide Rev. B June 2012 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Copyright."— Presentation transcript:

1 Snapdragon S1 APQ7027A-based DragonBoard Quick Start Guide Rev. B June 2012 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Copyright ©2012 Bsquare Corporation and its respective licensors. All rights reserved. Q2 Submit any technical questions relating to the Snapdragon APQ7027A-based Dragonboard to Bsquare Corporation Your use of this document is subject to and governed by those terms and conditions in the Bsquare Software License Agreement for the Snapdragon APQ7027A-based Dragonboard, which you or the legal entity you represent, as the case may be, accepted and agreed to when purchasing a Snapdragon APQ7027A-based Dragonboard from Bsquare Corporation (Agreement). You may use this document, which shall be considered part of the defined term Software for purposes of the Agreement, solely in support of your permitted use of the Snapdragon APQ7027A-based Dragonboard under the Agreement. Distribution of this document is strictly prohibited without the express written permission of Bsquare Corporation and its respective licensors, which they can withhold, condition or delay in its sole discretion. Bsquare is a trademark of Bsquare Corporation, registered in the United States and other countries. Qualcomm and Snapdragon are trademarks of Qualcomm Incorporated, registered in the United States and other countries. Other product and brand names used herein may be trademarks or registered trademarks of their respective owners. This document contains technical data that may be subject to U.S. and international export, re-export, or transfer (export) laws. Diversion contrary to U.S. and international law is strictly prohibited The DragonBoard is intended to provide early access for development, testing, and optimization on Qualcomms Snapdragon platform to component vendors, suppliers, application developers, and universities. Package contents a.Main kit i.Carrier board ii.Sensor card iii.Radio card iv.Micro USB v.Ethernet cable vi.Keyboard vii.Adapter b.Peripheral kit i.Touchscreen display module ii.Cameras iii.Earphones iv.Battery v.Battery holder Layout legend 1.Carrier board 2.Touchscreen display 3.Keyboard 4.Battery 5.Sensor card 6.Main board 7.Radio card 8.DC-jack 9.HS USB 10.RS232 socket 11.RJ11 socket mm audio jack 13.Ethernet connector 14.Camera connectors For more details on hardware functions, refer to the Snapdragon APQ7027A-based DragonBoard User Guide. APQ7027A set-up Installing the connectivity card and sensor card The connectivity (radio) card and the sensor card are from separate packages. Attach them to the carrier board by following these procedures. If the connectivity and sensor cards are not already installed when you receive the DragonBoard, refer to Installing the connectivity card and sensor card, below. 1.Using a screwdriver, carefully remove the plastic screws from the connectivity card mount point on the APQ7027A carrier board. Match the pins of the connectivity card to the holes of the carrier board.

2 Power-on and battery recharge A rechargeable battery is used to supply power to the carrier board. It takes output power at 5V/2A DC through a wall outlet. When ready to remove the battery, unplug the battery cable and remove the battery from the battery slot. Installing the battery 1.Insert the rechargeable battery into the battery slot. 2.Plug the battery cable into the battery connector on the carrier board. Make sure that the pins are aligned with the holes and push in the cable securely. Recharging the battery Plug one end of the power adapter into a wall outlet and the other end into the DC-jack on the carrier board. Powering on the DragonBoard Press the power button. When the Dragonboard is activated, a welcome message appears on the touchscreen panel. Removing the battery Rev. B June 2012 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Installing the connectivity card and sensor card (cont.) Snapdragon S1 APQ7027A-based Dragonboard Quick Start Guide 2.Gently push the pins into the holes to firmly attach the connectivity card. 3.Using a screwdriver, tighten the plastic screws on the connectivity card. Important: Ensure that the direction of the connectivity card matches the holes on the carrier board. Note: Repeat steps 1, 2, and 3 to attach the sensor card. Installing the touchscreen display 1.Connect the goldfinger to the back of the touchscreen with the pins on the board. 2.Attach the touchscreen display to the carrier board by screwing the 4 screws into the back of the carrier board. Then fold over the small black flap. Connector cables Confirm that the cable you are using matches the correct connector. 1MP Camera Install the 1 MP camera in the slot as shown below. Power


Download ppt "Snapdragon S1 APQ7027A-based DragonBoard Quick Start Guide Rev. B June 2012 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Copyright."

Similar presentations


Ads by Google