1. Cell Division and
Reproduction

2. Examples: Why do cells divide?
To maintain a workable volume to surface area ratio
Volume is the amount of space inside of a cell. This would include the cytoplasm and all of the organelles.
Surface area is the total amount of exterior which is exposed to the environment around the cell. This would include the outside of the cell membrane.
Volume increases faster than surface area. The surface area must be large enough for a sufficient amount of materials to enter the cell. The materials must enter quickly enough that all of the cell will get what it needs. Thus, a larger surface area: volume ratio is preferable.
Examples:
Larger surface area: volume ratio
Smaller surface area: volume ratio

3. Smaller cube (1 cm X 1 cm X 1 cm)
The surface area of one side = 1 cm X 1 cm = 1 square cm (or 1 cm2).
There are 6 sides, so the total surface area = 6 X  cm2 = 6 cm2.
Volume = 1 cm X 1 cm X 1 cm = 1 cubic cm (or 1 cm3)
Surface:Volume = 6 cm2/1 cm3 = 6 cm2/cm3 (or 6 square cm of surface area for each cubic cm of volume)
Larger cube (10 cm X 10 cm X 10 cm)
The surface area of one side = 10 cm X 10 cm = 100 square cm (or 100 cm2).
There are 6 sides, so the total surface area = 600 X  cm2 = 600 cm2.
Volume = 10 cm X 10 cm X 10 cm = 1000 cubic cm (or 1000 cm3)
Surface:Volume = 600 cm2/1000 cm3 = 0.6 cm2/cm3 (or 0.6 square cm of surface area for each cubic cm of volume).
Notice that the larger cube has more surface area and more volume but less surface area for each cubic centimeter of volume.  
Every cell is surrounded by a plasma membrane (discussed below and in the next chapter). Most cells are very small and therefore have a high ratio of plasma membrane surface to cell volume. 

4. Why do cells divide? To make more cells
Growth of a multicellular organism requires the addition of cells. Larger organisms do not necessarily have bigger cells, but they will have more cells than smaller organisms.
Repair and replacement of cells lost due to injury or cell death requires cell division. A healthy cell will divide to replace the lost cell(s).
Cell division occurs at different rates depending on the organism and the type of cell.
Plant root cells would divide more rapidly because this is an area of active growth.
Some nerve cells enter a phase of
no division.
Some bacteria cells divide very rapidly.
For example, E. coli can divide
every 20 minutes in ideal conditions.

5. How do cells divide? Prokaryotic vs. Eukaryotic Division
The result of all cell division is the production of daughter cells. In order for the daughter cells to contain enough DNA, the genetic material (DNA) of the parent cell must be copied.
Prokaryotic division differs from eukaryotic division because prokaryotic cells do not contain a nucleus or membrane-bound organelles.
Eukaryotic division requires the replication of the nucleus and genetic material (DNA) as well as the allocation of the organelles into each daughter cell.

6. How do cells divide? Eukaryotic Cell Cycle and Mitosis
Interphase is the “normal” part of the cell cycle. The cells spend most of the cycle (life of the cell) in interphase. During interphase the cell carries out life functions (STERNGR) and then prepares for division:
During most of interphase DNA exists in a “relaxed”, stringy form called chromatin. After being copied, there are two complete copies of the DNA in the cell. These copies are attached to each other.
Each copy of DNA is called a chromatid. The two chromatids are attached in a region called the centromere. At this point in interphase, the chromatids are coiled / condensed. The entire structure is called a doubled chromosome..
< Chromatid
Centriole>

7. Coiled chromosomes become visible Nuclear membrane is broken down
Stages of Mitosis (Eukaryotic cell division)
Prophase
Coiled chromosomes become visible
Nuclear membrane is broken down
Spindles (protein fibers that will attach to chromosomes and aid in chromosome movement) start to form

8. Metaphase Stages of Mitosis (Eukaryotic cell division)
Spindle fibers attach to the centromere regions
Chromosomes are moved to the middle of the cell

9. Stages of Mitosis (Eukaryotic cell division) Anaphase
Spindle fibers shorten
Doubled chromosomes are separated into chromatids
Chromatids begin to move to opposite poles/ends of the cell

10. Telophase Stages of Mitosis (Eukaryotic cell division)
Spindle fibers are broken down
Nuclear membrane begins to form around the clusters of chromatids at each pole of the cell

11. Stages of Mitosis (Eukaryotic cell division)
Cytokinesis is the separation of the cytoplasm (including all organelles) into two identical daughter cells.
Animal cells constrict in the middle to pinch apart forming two different cells.
Plant cells also produce a cell plate dividing the two cells. This cell plate will become the cell wall.

12. Examples: Radiation, some viruses
Mitosis and Cancer
Typically, cell division is controlled by genes in the cell, contact with other cells, and available nutrients in the environment.
Cancer is a class of diseases characterized by uncontrolled cell division and the ability of these cells to invade other tissues.
Cancer occurs when the genes that control cell division do not function properly. This may occur because of an inherited genetic defect, a spontaneous genetic mutation, or a mutation caused by environmental factors.
Mutagens are environmental factors that increase genetic mutations.
Examples: Radiation, some viruses
Carcinogens are environmental factors that increase the likelihood of cancer. Carcinogens are often mutagens, and any mutagenic agent can cause cancer if it mutates a gene that controls cell division.
Examples: Cigarette smoke, DDT

13. Why is a large surface area: volume ratio preferable?
Review Questions
Why is a large surface area: volume ratio preferable?
Volume increases faster than surface area and the cell can more efficiently move material in and out of the cell.
2. Name three reasons cells must divide.
Replace injured or worn out cells
Growth
Maintain a workable surface area to volume ratio
3. Why is eukaryotic cell division more complex than prokaryotic cell division?
prokaryotic cells do not contain a nucleus or membrane-bound organelles.
4. What are the two basic stages of the cell cycle?
Interphase, phases of mitosis (prophase, metaphase, anaphase, telophase)

14. 7. How are mitosis and cancer connected?
5. How is the genetic material “prepared” for cell division during interphase?
exists in a “relaxed”, stringy form called chromatin. Copied, called chromatid, attached to a centromere, then coiled into a double chromosome
6. How many daughter cells are produced as a result of mitosis, and how do these cells compare to the parent cell?
2, Identical
7. How are mitosis and cancer connected?
Cells that are cancerous undergo uncontrolled cell division. The cell division includes mitosis.

15. Why does reproduction require two types of cell division?
Asexual reproduction and cell division
Asexual reproduction is reproduction involving only one source of genetic material (i.e. one parent). This means that offspring will be genetically identical (clones) to the parent.
There are several types of asexual reproduction:
Binary fission occurs when a unicellular organism (such as bacteria or an amoeba) divides into two equally sized cells for the purpose of reproduction.
Budding occurs when simple organisms (such as yeast or hydra) produce much smaller cells than those of the parent organism.
Binary Budding
Fission

16. Advantages and Disadvantages of Asexual Reproduction:
Asexual reproduction and cell division
Sporulation occurs when an organism (such as mushrooms) produce spores – tiny packets of DNA – for the purpose of reproduction.
Vegetative propagation occurs when a portion of a plant goes through cell division in order to produce another plant.
Regeneration occurs when a part of an animal (such as an earthworm) undergoes cell division to produce a new organism
Advantages and Disadvantages of Asexual Reproduction:
Advantages of asexual reproduction include speed of reproduction and producing multiple copies of successful genetic combinations.
Disadvantages of asexual reproduction include increased risk of a single factor affecting an entire population due to lack of genetic variation

17. Asexual reproduction and cell division
4. Mitosis is usually the mechanism that allows asexual reproduction to occur. For example, when an earthworm is cut in half, cells must use mitosis to divide in order to produce cells which will reconstruct the mission portion.

18. Why does reproduction require two types of cell division?
Sexual reproduction and cell division
1. Sexual reproduction is reproduction involving two sources of genetic material (i.e. two parents). This means that offspring will be genetic combinations of the two parents.
Gametes are sex cells, such as sperm and egg. The purpose of a gamete is to fuse with another gamete to combine genetic material (fertilization).
A zygote is the cell which is produced by fertilization. The zygote will develop into an embryo.
Mitosis

19. Why does reproduction require two types of cell division?
2. Advantages and Disadvantages of Sexual Reproduction:
The main advantage of sexual reproduction is genetic variation. With many genetic possibilities, the likelihood of a successful combination of traits for a particular environment is high.
The disadvantages of sexual reproduction include the necessity of mating for fertilization (which requires more time) and the risks of unfavorable genetic combinations.

20. Why does reproduction require two types of cell division?
Although sexual reproduction begins differently than asexual reproduction (with two parents as opposed to one parent), sexual reproduction also relies on cell division.
Meiosis is a type of cell division which produces gametes. Meiosis is a unique type of cell division because it divides the genetic material in half, allowing for fertilization.
Example: Human body cells contain 46 chromosomes.
In order for a zygote (fertilized egg) to contain 46 chromosomes, the sperm and egg must each contain only 23 chromosomes.
Mitosis is the process which allows the zygote to begin dividing to produce a multicellular organism. The cells also must differentiate (become different types of cells to carry out different functions).

21. The Process Fertilization (union of the gametes)
Meiosis (to produce the gametes)
Mitosis (necessary for growth

22. 2. Name five types of asexual reproduction.
Review Questions
1. How many sources of genetic material are involved in asexual reproduction? In sexual reproduction?
1, 2
2. Name five types of asexual reproduction.
Binary Fission, Budding, Sporulation, Vegetative Propagation, Regeneration
3. Why is mitosis necessary for asexual reproduction?
To increase the number of cells in the organism
4. Name one advantage and one disadvantage of asexual reproduction.
Speed of reproduction, lack of genetic variation

23. 5. What are gametes? How is a zygote produced from gametes?
Product of Meiosis, where the chromosome number is 50%, The gametes unite in fertilization creating the zygote
6. Name one advantage and one disadvantage of sexual reproduction.
Offspring are a genetic combination of both parents. Takes longer to produce offspring.
7. How are both mitosis and meiosis necessary for sexual reproduction?
Meiosis is needed to produce gametes and mitosis is necessary for growth of the organism.

24. How does meiosis produce gametes?
A. Recall that a gamete is very different from a somatic (body) cell.
1. A somatic cell is diploid, which means it contains two of each type of chromosome. These chromosome pairs are called homologous chromosomes. For example, a human has 23 types of chromosomes. A human somatic cell has 46 total chromosomes, consisting of 23 homologous pairs.
2. A gamete is haploid, which means it contains only one of each type of chromosome (one from each homologous pair). For example, a human egg cell (ovum) contains 23 total chromosomes.

25. B. Eukaryotic Cell Cycle and Meiosis
1. At the end of interphase (the longest part of the cell cycle in which the cell completes normal life functions), the cell duplicates the DNA. This creates doubled chromosomes. The cell is now ready to divide.
2. Meiosis requires two cell divisions:
Meiosis I is called the reduction division. In this division, the homologous pairs of doubled chromosomes are separated. The end result of Meiosis I is two daughter cells, each of which is haploid but contains doubled genetic material.
Meiosis II uses the same basic steps as mitosis. In this division, the doubled chromosomes are separated. The end result of Meiosis II is four daughter cells, each of which is haploid and contains no duplicated DNA.

26. Graphical representation of Meiosis:
46 Doubled
Meiosis I
23 Doubled
23 Doubled
Meiosis II
23 Singled
23 Singled
23 Singled
23 Singled

27. 3. Meiosis provides several sources of genetic variation:
a. Gene mutations can occur during the duplication of DNA at the end of interphase before meiosis (or mitosis) begins.
b. Crossing over occurs when the homologous pairs come together during Meiosis I. In crossing-over a part of one chromosome can switch places with the same part of the homologous chromosome. Then, when the homologous pairs are separated, each chromosome will be different than the original.
c. Random assortment of chromosomes into daughter cells during Meiosis I allows for a mix of the chromosomes inherited from each parent.
Independent Assortment Animation

28. d. Nondisjunction, when homologous chromosomes do not properly separate, may occur during Meiosis I, creating a gamete with one too many or one too few chromosomes.
e. The random fertilization of any one egg by any one sperm allows for numerous genetic combinations in offspring.
Nondisjunction/Fertilization Aniatmion

29. Review Questions
1. How is the chromosome number of a gamete different from the chromosome number of a somatic cell?
Gamete has one copy of the chromosome (haploid) and a somatic cell has two copies (diploid)
2. What types of cells are diploid? Haploid?
Somatic is a diploid and a Gamete is a haploid
3. What is the purpose of meiosis?
It provides several sources of general variation and produces the gametes needed for fertilization

30. 4. What is another name for Meiosis I?
Reduction Division
5. How is the purpose of Meiosis I different from the purpose of Meiosis II?
Meiosis 1 divides the chromosome number by half, while Meiosis II separates the sister chromatids of the doubled chromosomes.
6. Name five sources of variation meiosis provides.
Gene mutation
Crossing Over
Random assortment of chromosome
Nondisjunction
Random Fertilization
7. Describe crossing-over.
Occurs when the homologous pairs come together during Meiosis I and portions of the homologous chromosomes switch