1. The Breakwaters Port Taranaki Main & Lee Breakwaters How do I change the slide?

2. The Breakwaters Port Taranaki Main & Lee Breakwaters To change the slide, use the arrow keys on the keyboard. How do I change the slide?

3. View of Main Breakwater from the Lee Breakwater

4. Video of Breakwaters – Brief History.

5. The Main Breakwater was started in 1881. A large amount of concrete was poured onto the rock under the place the sand would be if it hadn’t been removed. It had been in a large box on canvas, and the akmons were placed on top The plans were planed by Sir John Coode, but were re-created to make them stronger by engineer Mr Rhind. The concrete blocks were created by mixing rock from the Sugar Loaves with concrete, but since that proved too expensive, it was discontinued and instead of using barges to get rock from the Sugar Loaf Islands, the rock was then removed from Paritutu.

6. The funders of the breakwaters had loaned out £200,000 from the bank, but used only £75,000 and £18,000 went to rail tracks along the breakwaters. The areas between the breakwaters is continually dredged out to ensure the port area has enough water, so the ships stay afloat.

7. Parts of the breakwaters

8. Akmons are there to make sure the breakwaters stay intact and are the supporters of the Breakwaters.

9. The beacons light up at night to warn ships where the breakwaters are.

10. And that’s the breakwaters. Thanks for watching!!! Close… View original photos and video…

11. Close the show And that’s the breakwaters. Thanks for watching!!! Close… View original photos and video…

12. Akmon Photo Beacon Photo Breakwaters Video Back

13. Back…