1. ELECTRIC CHARGES AND CURRENT

2. WHAT IS THE DIFFERENCE? Static Electricity and Electrical Current is made of the same thing, electrons. However, in static electricity there is a build up of electrons on an object or area; while electrical current is the flow of electrons in a specific direction.

3. ELECTRIC CURRENT Electrical devices need a steady flow of electricity. The steady flow of charged particles is called electrical current. The flow continues until the energy source is used up, or disconnected. However, It can only flow if there is a path to travel through. Electrical Current is measured in Amperes

4. CONDUCTORS Allow the easy flow of electricity, loosely bound electrons that are free to move from atom to atom metals like aluminum, gold, copper and silver are examples of good conductors.

5. INSULATORS Insulators – resists the flow of electrons making the object safe to handle  plastic, rubber, glass  Keep charges away from body

6. RESISTORS Resistors-allow electrons to flow but slow them down considerably. This allows the current to slow down.

7. electron movement in an insulator electron movement in a conductor LG: to understand the basics of current electricity CURRENT ELECTRICITY: THE CONTROLLED FLOW OF ELECTRONS THROUGH A CONDUCTOR

8. VOLTAGE Voltage – causes current to flow through an electrical circuit Volt – unit of measure to measure this potential A Voltage Source (battery or generator) is required to maintain the electrical potential in a circuit.

9. ELECTRICAL RESISTANCE the opposition to the flow of electricity – measured in Ohms – symbol is the Greek letter Omega – Electricity will take the path of least resistance  Ex: Lightning Rod The greater the resistance, the less current there is for a given voltage.  a. Longer wires have greater resistance than short wires  b. Thin wires have more resistance than thick wire  c. High conductors have less resistance than insulators

10. SUPERCONDUCTORS There are some materials that have practically no resistance at extremely low temperatures. These are called Superconductors. Superconductors have many uses including use in power lines to increase efficiency as well as in computers to improve speed.

11. GROUNDING As discussed charges/electricity likes to move through lines with lower resistance. Because of this we have developed a procedure known as grounding. Grounding means providing a harmless, low-resistance path-a ground- for electricity to flow.  This is used to protect buildings from damage from lightning strikes.  A “Lighting Rod” moves lighting strikes into the ground where the charge is absorbed.

12. OHMS LAW

13. Ohm’s Law explains the relationship between voltage (V or E), current (I) and resistance (R) Used by electricians, automotive technicians, stereo installers

14. It is the push or pressure behind current flow through a circuit, and is measured in (V) volts.

15. Current refers to the quantity/volume of electrical flow. Measured in Amps (A)

16. Resistance to the flow of the current. Measured in Ohms

17. 1. Assuming the resistance does not change: As voltage increases, current increases. as voltage decreases, current decreases. 2. Assuming the voltage does not change: As resistance increases, current decreases. As resistance decreases, current increases.

18. READ SECTION 6.1 Read section 6.1 in the yellow textbooks and take notes. Title these notes “Circuits”. Topics for your notes need to include:  Defining Circuits  List parts of a circuit and what they do.  Open vs. Closed Circuits  Short Circuits  Grounding  Safety devices  Fuses  Other safety devices.

19. http://montage.baschools.org/SAFARI/montage/play.php?keyindex= 40644&location=local&filetypeid=12http://montage.baschools.org/SAFARI/montage/play.php?keyindex= 40644&location=local&filetypeid=12