1. R EDESIGN OF RECIPROCATING TYPE PLUNGER PUMP. PROJECT GUIDE: A.RAMPRAKASH,M.E., PROJECT MEMBERS: P.VINOTHKUMAR K.VINOTH T.KANNAN B.RAJASEKARAN

2. P LUNGER PUMPS. Plunger pumps are reciprocating type positive displacement pumps. Fluid flows through the suction valve and into the chamber as the plunger recedes. At the end of the stroke, the chamber is at its maximum size. The suction valve closes, the plunger moves forward into the chamber, forcing the fluid out the discharge valve. The flow from each chamber is a pulse flow.

3. C ONTD … A plunger pump where the high-pressure seal is stationary and a smooth cylindrical plunger slides through the seal. This type of pump is often used to transfer municipal and industrial sewage. The volume of fluid discharged is equal to the area of plunger,multiplied by its stroke length. the number of the plunger and the speed of the drive.

4. P RACTICAL APPLICATION Agro sprayer. Water service for vechicles. Fire service applications. Toilet cleaner.

5. P ROBLEMS.  In current model, the operating gun is having pulsation. Because the pulsation dampener is not effective.  So, It is a problem to operator to handle the gun.  The plunger material having more problems due to low hardness (38 HRC).  So, we planned to improve the hardness property of plunger material.

6. OBJECTIVES.  By Redesign the pulsation dampener to reduce the pulsation.  By Changing the plunger material according to hardness property.

7. P ULSATION DAMPENER Pulsation dampeners is a temporary storage and pulsation control device. Pulsation dampeners are used to reduce suction and discharge pressure pulsations. At the forward stroke water will fill the dampener. At the return stroke water is discharged. So, the flow is balanced to equal discharge.

8. C ONTD … In the plunger pump it is located at the discharge potion. Cylindrical hollow dampener having atmospheric pressure. The present model pulsation dampener is show in fig.

9. R EDESIGN OF PULSATION DAMPENER. In the current pulsation dampener is operated in the atmospheric pressure. So, the discharge gun is having some pulsations. In new design, the pulsation dampener is divided into two parts,the diaphragm rubber is fixed between the two parts. Types of pulsation dampener. Air loaded at 18 bar with diaphragm. Spring loaded at 18 bar with diaphragm.

10. A T FORWARD STROKE

11. A T RETURN STROKE

12. D ESIGN OF A IR LOADED PULSATION DAMPENER.

13. A T FORWARD STROKE

14. A T RETURN STROKE

15. D ESIGN OF SPRING LOADED PULSATION DAMPENER.

16. F UNCTION OF PULSATION DAMPENER

17. ALTERNATIVE MATERIAL FOR PLUNGER. The company is now using ss410 as plunger material. It have more drawback in hardness, corrosion,wear and tear. hardness of ss410 is 38 HRC So, we planned to change the material with higher hardness than present material.

18. EXISTING MATERIAL (SS-410) Chemistry properties. Carbon0.15 max Chromium11.5 - 13.5 IronBalance Manganese1 max Phosphorus0.04 max Silicon1 max Sulphur0.03 max

19. ALTERNATIVE MATERIALS The alternatives are  Ss304 ( hardness 50-HRC )  Ss410 with harden and ceramic coating ( hardness 83-HRC)

20. SS-304 PROPERTIES Fe64.99-74% Ni8% Mn2% S0.03% C0.08% Si0.75%

21. SS-410 WITH CERAMIC COATING PROPERTIESUNITSCN-178 Colour-Grey HardnessHRC83 SiC Content%75 DensityGrams / cc.2.5 - 2.6

22. COMPARISSION OF MATERIALS propertiesss410ss304Ss410 with ceramic coat Corrosionhigh< ss410< ss304 Hardness38 HRC50HRC83HRC Repair/month12<6<2 With stand in high pressure medium>ss410>ss304

23. T HANK YOU …