1. Lab-On-A-Chip Overview ENGR 1182.03 Lecture Slides

2. Lab-on-a-Chip Project  As part of the project in ENG 1182.03, your team will:  Innovate,  Design,  Build,  Document and  Test a cheap, portable Lab-on-a-Chip (LOC)  To obtain these deliverables, you will learn important tools like:  Time management and task scheduling,  Team communications and meetings,  Fair division of labor and  Team member responsibilities

3. Lab-on-a-Chip  Small scale chemical lab in a portable and disposable format.  Incorporates sampling, mixing, reacting, sensing, and output all in a single device.  Small sample sizes  Easier to obtain  Require smaller amounts of reagents  Disposable/Recyclable  Inexpensive materials & manufacturing techniques

4. Relating the LOC to EDP Brainstorming design ideas Choose your design Solidworks drawing Test Build 1 st design Modified 2 nd design

5. Deliverables (PDD section – Design Deliverables) Design Deliverables Each team will provide two chip designs for the LOC device – One design for each chipholder Initial Sketch Design Submission for the 1 st chip Preliminar y 1 st design 1st Chip Design Submission 2 nd Chip Design Submission Hand-drawn sketchRequired Not required Solidworks Deliverable Not required Dimension ed Part File to GTA Dimensioned Part File to GTA 1.Printout of dimensioned drawings 2. Send Solidworks part file to GTA Operational ProcessNot required Per Project Desc. Doc. Revised CalculationsNot required Detection well Volume Per Project Desc. Doc.

6. Additional Lab Components  Nanotechnology Modules (NTM)  An integral part of your lab assignments  NTM Quizzes on Carmen  NTM modules are available on Carmen  Nanotechnology Lab Tours (Project Description Document section – Nanotech Lab Tour)  Visit various laboratories around campus  During the middle of the semester  Please read Lab Tour Summary Requirements given in the project description document  Lab Tour Summary – check course website for due dates

7. Project Notebook  The purpose of the project notebook is to document all work undertaken by the team during the course of the semester.  Project notebook contains all information required for implementation of the project, in a sequential fashion.  The project notebook is worth 50 points  Project notebooks will be checked on a weekly basis in the Lab sessions  Final submission of Project Notebook within the first five minutes of the Poster Presentation session. Any late submissions are subject to a 30% deduction (50 x 0.3 ≈ 15 points)  Project Description Document section – Project Notebook/Reporting

8. Testing  The team will be graded on the basis of the final test  Scoring will be based on -  Calibration  Repeatability  Relative Indication  Accuracy  Sample Delivery  Chip Cleaning  No Disassembly  Project Description Document section – Testing the Chip

9. Assignment submissions  Various documents and reports etc. will be due at the beginning of lab sessions during the entire project:  30% will be deducted for late submissions!  Refer to the course website for due dates