1. Forming Machines Foldable Information

2. FORGE Related Terms  Anvil  Blacksmith’s Hammer  Ferrous Metals

3. FORGE Uses  Used to heat up ferrous metal to a red hot temperature.  The metal can then be shaped using the anvil and blacksmith’s hammers.

4. FORGE Safety Rules  Always make sure the lid is open before lighting.  Stay away from opening when lighting.  Always shut the gas and air off when shutting down the forge.  Be aware of where the hot metal is at all times.

5. CRUCIBLE FURNACE Related Terms  Non-ferrous metals  Ingots  Oil Bonded Sand Casting

6. CRUCIBLE FURNACE Use  Used to melt non-ferrous metal that will be cast into a mold.

7. CRUCIBLE FURNACE Safety Rules  Always have the lid open when lighting.  Always keep any moisture away from the molten metal.  Only instructor may fill the furnace or pour the molten metal.  Turn off the gas and the air when shutting down the furnace.

8. RING ROLLER Related Terms  Sheet metal (slip rolls)  Round or square bar (ring roller)

9. RING ROLLER Uses  Used to roll metal into a cylinder, cone or ring.

10. RING ROLLER Safety Rules  Keep fingers away from moving parts.  Do not overload the machines with to thick of a material.  Increase amount of curve over several passes.